Manufacturers Trader Service OEM

Medima Sp. z o.o.

Al. Jerozolimskie 200 , 02-486 Warsaw
Poland

Telephone +48 22 3132266
Fax +48 22 3132269
medima@medima.pl

Trade fair hall

  • Hall 10 / A50
 Interactive Plan

Hall map

MEDICA 2016 hall map (Hall 10): stand A50

Fairground map

MEDICA 2016 fairground map: Hall 10

Our range of products

Product categories

  • 01  Electromedical equipment / Medical Technology
  • 01.03  Therapie and physical medicine
  • 01.03.04  Infusion technology equipment

Our products

Product category: Infusion technology equipment

Medima Syringe Infusion Pumps

Medima S

Basic model, extremely simple to use. Operates in: ml/min, ml/h and ml/24h.
Calculates flow rate basing on volume and delivery time.
In addition, can store in memory up to 120 drug names. Displays one throughout infusion. 

Medima S1

Infusion flow rate programmable in ml/h and other frequently used units including: ng, µg, mg, µU, mU, U, kU, µmol, mmol, mol, / kg / min, h, 24 h.
Numerous infusion modes such as: continuous infusion, intermittent infusion, infusion with profile (up to 24 cycles).
In addition, can store in memory a drug library of 120 full drug dosing protocols, but without infusion parameter limits. Displays drug name throughout infusion.
Comprehensive configuration options: advanced protection system, night mode, alarm options.

Medima S2

All options of Medima S1 plus drug library with limits applicable to all infusion parameters.
Soft limits (min max) warn when recommended values are exceeded but do not prohibit the introduction of changes. Hard limits (min max) disable introduction of any values from outside prescribed range. 

Medima S-PCA

Designed to fight against acute pain. Equipped with a patient-operated button which starts the delivery of programmed drug dose and a syringe cover with a lock.
An option to switch to standard infusion modes same as for model S2.
All options of Medima S2 including drug library with infusion parameter limits.
Versions with or without syringe cover.

Basic functions
All Medina pumps are operated in the same manner (differences between models considered) and have a number of common features:
Large and legible graphic display which constantly displays:

• Name of the medicine
• Flow rate
• Power status and power supply type
• Infusion pressure and preset occlusion alarm level
• Size and type of syringe
• Syringe Pump Display

Wide range of syringes can be selected from all major brands of the following sizes: 5, 10, 20, 30, 50 ml.

Automatic syringe loading and recognition simplifying and speeding up pump maintenance, reducing the initial infusion errors.

Simple to set up and easy to operate. Quick data entry with the use of numerical keyboard. All parameters can be adjusted without infusion interruption.

Different infusion units ng, µg, mg, µU, mU, U, kU, µmol, mmol, mol, / kg / min / hour / 24h.

Data lock. Programmed parameters can be password-protected. Additionally sophisticated function protection system allows blocking access to chosen functions, i.e. infusion start, bolus start, occlusion threshold change, pump switching-off.

Bolus fully automatic and manual. Possibility of programming dose, time or flow rate.
Automatic reduction of residual bolus after occlusion release. 

6 levels of occlusion pressure. Possibility to adjust the pressure level during infusion. Pressure indication displayed constantly during delivery.

Sophisticated system of alarms. Allows different tones and loudness. Built in night mode with the option to set lower sound level as well as reduce display brightness.

Event log. Allows storing full infusion history (parameters, operator activities and alarms along with the date and time of occurrence). The stored information can be viewed either on the pump's display or on PC.

Drug library. Up to 120 drug dosing procedures can be stored in pump's memory along with all the essential infusion parameters. Additionally upper and lower, soft and hard limits for all infusion parameters can be entered in a drug library to minimize medications errors and ensure overdose protection. Soft limits warn about exceeding recommended values, but do not block values entered. Hard limits prevent from entering values that are beyond the range. The drug library can be entered as follows:

• directly from the pump keyboard
• sent from pump to pump by RS232 interface
• created in Medima Drug Editor software and set to the pump directly from a PC or via MedimaNet

More Less

Product category: Infusion technology equipment

Medima Volumetric Infusion Pumps

Our pumps use IV sets without silicon inlay. The use of original Medima sets guarantees high accuracy, even for very long infusions. In addition, the sets are equipped with automatic free flow blocking system to increase infusion safety, removable only when the blocking system is on. 
 
Medima P

Basic model, extremely simple to use. Operates in: ml/min, ml/h and ml/24h.
Calculates flow rate basing on volume and delivery time.
In addition, can store in memory up to 120 drug names. Displays one throughout infusion.
Micro-infusion - flow rate from 0.1 ml/h 

Medima P1

Infusion flow rate programmable in ml/h and other frequently used units including: ng, µg, mg, µU, mU, U, kU, µmol, mmol, mol, / kg / min, h, 24 h.
Numerous infusion modes such as: continuous infusion, intermittent infusion, infusion with profile (up to 24 cycles).
In addition, can store in memory a drug library of 120 full drug dosing protocols, but without infusion parameter limits.
Displays drug name throughout infusion.
Comprehensive configuration options: advanced protection system, night mode, alarm options.
Micro-infusion - flow rate from 0.1 ml/h 

Medima P2

All options of Medima P1 plus drug library with limits applicable to all infusion parameters.
Soft limits (min max) warn when recommended values are exceeded but do not prohibit the introduction of changes. Hard limits (min max) disable introduction of any values from outside prescribed range.

All Medina pumps are operated in the same manner (differences between models considered) and have a number of common features:

Large and legible graphic display which constantly displays:

• Name of the medicine
• Flow rate
• Power status and power supply type
• Infusion pressure and preset occlusion alarm level
• Volumetric Pump Display 

Simple to set up and easy to operate. Quick data entry with the use of numerical keyboard. All parameters can be adjusted without infusion interruption.

Different infusion units ng, µg, mg, µU, mU, U, kU, µmol, mmol, mol, / kg / min / hour / 24h.
 
Data lock. Programmed parameters can be password-protected. Additionally sophisticated function protection system allows blocking access to chosen functions, i.e. infusion start, bolus start, occlusion threshold change, pump switching-off.

Bolus fully automatic and manual. Possibility of programming dose, time or flow rate.

Automatic reduction of residual bolus after occlusion release.

4 levels of occlusion pressure. Possibility to adjust the pressure level during infusion. Pressure indication displayed constantly during delivery.

Sophisticated system of alarms. Allows different tones and loudness. Built in night mode with the option to set lower sound level as well as reduce display brightness.

Event log. Allows storing full infusion history (parameters, operator activities and alarms along with the date and time of occurrence). The stored information can be viewed either on the pump's display or on PC.

Drug library. Up to 120 drug dosing procedures can be stored in pump's memory along with all the essential infusion parameters. Additionally upper and lower, soft and hard limits for all infusion parameters can be entered in a drug library to minimize medications errors and ensure overdose protection. Soft limits warn about exceeding recommended values, but do not block values entered. Hard limits prevent from entering values that are beyond the range. The drug library can be entered as follows:

• directly from the pump keyboard
• sent from pump to pump by RS232 interface
• created in Medima Drug Editor software and set to the pump directly from a PC or via MedimaNet

More Less

Product category: Infusion technology equipment

Medima Docking Stations

Intensive medical care requires more and more often a large number of infusion pumps. Locating them in the direct environment of the patient becomes a problem, due to limited space or number of power supply wires. Docking stations seem to be an excellent solutions in such cases, as they enable fast installation of pumps at the patient's bed and the development of infusion sets as suitable for current therapy. Power supply and communication ports are connected automatically when the pump is docked. Medima pumps can be installed in stations and outside them, without using or dismantling any additional elements. Pumps with docking stations automatically link with MedimaNet Server which allows to monitor infusions and to store historic data.

If you do not plan to link your pumps with the hospital computer system while easy fixing and limited space at patient's bed are still an issue, we supply also docking stations without communications modules. Such modules can be added in future, if required.

More Less

Product category: Infusion technology equipment

Docking stations for ambulances DS102A and DS102AC

Due to growing requirements for ambulance equipment, syringe infusion pumps become its standard part. Their safe and quick fixation is essential. Medima offers a docking station particulary designed for this purpose. It is enough just to put a pump into a docking station and it is fixed safely: 12V power supply is connected automatically. There is no need for time-consuming screwing it. Although Medima pumps can be fixed in a standard way to vertical IV poles, docking stations assure safer and more comfortable way of fixation in ambulances.

Pumps and docking stations fulfill the requirements of EN1789 standard.

It is worth adding that Media syringe pumps can operate without connection to the mains even for 20 hours (see the technical data) and quick recharging allows safe pump operation during patient's transportation. Moreover Medima pumps are equipped with a unique battery condition test that significantly increase safety of their operation.

More Less

Product category: Infusion technology equipment

Infusion Stand ST01

It is risky to attach a large number of pumps to a standard stand as it dosen't guarantee the required stability of the set. The Medima stands, due to their reliable structure, enable the installation of multiple mobile infusion systems.

• Reliable structure.
• Fixing up to 8 pumps including docking station.
• One power supply cable.
• Optional link with MedimaNet.

More Less

About us

Company details

Medima Ltd. is a supplier of medical infusion systems, offering comprehensive solutions for safe intravenous drug application.

Our products are mutually compatible and can be combined into sets, starting from the simplest ones which consist of a few elements, and ending with sophisticated systems combined into whole through information network. System elements include:

infusion modules - syringe pumps including also PCA and volumetric infusion pumps

fixing systems - multiple module docking stations with an option to connect different pump models to the hospital information system

software - a set of functional modules for increased infusion safety and historic data storage

You can start building your system by buying a few infusion pumps and adding more modules in future. Medima Ltd. guarantees full compatibility of all system elements and provides assistance in system design and development.

We particularly focus on safety, reliability and simple service

and for this reason we greatly value close contacts with medical circles as an extremely important element of our operations. In the result, we are able to develop products which better satisfy the changing requirements of the medical service. We attach considerable importance to training medical personnel, which we consider as a key to acknowledging and using the potential of medical equipment which undergoes constant upgrading and involves more and more information elements.

More Less

Company data

Sales volume

1-9 Mio US $

Number of employees

20-49

Foundation

2004

Area of business

Electromedical equipment / Medical Technology