DNA-Technology LLC

Varshavskoe Shosse 125Zh, Block 6, 117587 Moscow
Russian Federation

Telephone +7 495 9804555
Fax +7 495 9804555

Trade fair hall

  • Hall 3 / E57
 Interactive Plan

Hall map

MEDICA 2016 hall map (Hall 3): stand E57

Fairground map

MEDICA 2016 fairground map: Hall 3

Our range of products

Product categories

  • 03  Diagnostics
  • 03.01  Clinical chemistry
  • 03.01.02  DNA diagnosis kits
  • 03  Diagnostics
  • 03.01  Clinical chemistry
  • 03.01.07  Gene tests / molecular biological diagnostic
  • 03  Diagnostics
  • 03.01  Clinical chemistry
  • 03.01.07  Gene tests / molecular biological diagnostic
  •  DNA analysis

DNA analysis

Our products

Product category: DNA diagnosis kits

Equipment for PCR-analysis

DNA-Technology manufactures basic equipment for all stages of PCR - sample preparation, amplification and detection. No doubt, that specific equipment is needed by a laboratory depends on its goals, the  type of studies it plans to conduct and the method of detecting PCR results it chooses. Thus, if your laboratory plans to carry out quantitative analysis (to determine the viral load of HIV, hepatitis B or C viruses in blood, the amount of genetically modified ingredients or vaginal bacterial flora), then the only option will be Real-time PCR which requires the use of an appropriate detection thermocycler that allows PCR to be conducted in real time while carrying out both quantitative and screening research. If your laboratory intends to conduct only qualitative analysis to detect the presence of infectious agents, then FLASH technology would be the most appropriate choice (which would mean using a Gene fluorescence detector). This technology makes it possible to conduct extensive research without additional labor costs at the detection stage, while at the same time significantly reducing the risk of contamination with amplicons. If you plan to use your laboratory for some specific purposes such as forensics, medical and genetic research, fundamental studies, HLA-genotyping etc, then the most optimal detection method would be electrophoresis. When using electrophoresis it has to be remembered that its main drawback is the increased risk of contamination with amplicons which can lead to getting false results, whether positive or negative.

Warranty and post warranty service.

During a warranty period we maintain and repair our equipment free of charge. After the end of the warranty period we offer post warranty services for our equipment.

Our service engineer will install PCR-equipment at your laboratory and train your personnel in how to operate it.

More Less

Product category: DNA diagnosis kits

DTprime Real-time Detection Thermal Cycler

DTprime (DT-96) Real-time cycler combines innovative technical solutions, flexibility of setup, user- friendly English/Russian interface and reliable design. DTprime is the optimal choice for diagnostic laboratories with high throughput as well as for researchers that need some fine tuning and setup optimization.

DTprime (DT-96) Special Features:
Multipurpose Flexibility and High Sensitivity High flexibility thanks to the 96-well format suited for PCR microplates,test tubes and strips;
Up to 5-channel multiplex fluorescence detection for a variety of fluorescence dyes in a wide spectral range*;
High sensitivity, optimal signal/noise ratio and a low interchannel crosstalk ensured by the unique design of the optical track including a separate light source for each channel and a matrix CCD camera;
Broad dynamic range of detection achieved by employing multiple exposure method, which takes the optimization of signal registration conditions to a whole new level, greatly simplifying or even eliminating the need for photometric settings;
Simplicity and intuitive operation by users with different qualifications. The program can be run either in a simplified or in a full-featured mode, which provide a supportive environment both for clinical and research applications;
Light emitting diodes (LED) as a light source that, unlike halogen lamps, does not deteriorate over the life-time of about 100,000 hours and therefore does not require maintenance or constant monitoring;
An embedded microcontroller and display allowing to execute programs without direct supervision as well as to resume program execution in a case of a power failure or an unexpected computer shutdown;
Can operate with robotized sample preparation systems thanks to its special body design and an automatically operated draw-out thermoblock;
Can be easily integrated with any laboratory information system (LIS) as the device can save all data in a standard graphic or text formats ready to be loaded into databases.
Several devices can be controlled simultaneously by one computer. Moreover any batch of data can be viewed and analyzed by the user using computer while another amplification program is being executed;
The compact body design, allowing several devices to be placed closer together to increase productivity at minimal space requirements;
The device is an open system and is not limited for use with specific reagents or plastic. At the same time DNA-Technology supplies test systems for the majority of real time PCR applications that exist today.

More Less

Product category: DNA diagnosis kits

Fluorescent PCR detector "Gene 4"

The special fluorescence PCR detector named Gene-4 is designed for registering the results of PCR with fluorescence- based detection.

Special Features:
The possibility to use probes and/or primers with fluorescent markers and quenchers;
Reduced labor costs and the time it takes to get results;
Closed-tube format for fluorescence analysis of PCR products (no electrophoretic analysis) minimizes the risk of in-laboratory contamination with PCR products and sets less stringent requirements for PCR laboratory organization;
USB interface/power supply;
Replacement rotor for 0.5/0.2-ml microtubes;
The efficacy of the device makes it possible to organize routine laboratory tests on a large scale;
The software for effective results processing, documentation and reporting;
Compact design.

More Less

Product category: Gene tests / molecular biological diagnostic

Design of a PCR-laboratory

A PCR-laboratory must be divided into three areas, according to the number of technological operations:

Sample preparation area;
Reaction mix preparation area (the clean area);
Detection area.
All the three areas must be in isolated rooms equipped with sealed entry chambers. It is also important to have air filters. If there are special cabinets available, the first and the second areas can be merged in which case a separate room must be allocated for performing the amplification reaction. The location of the detection area depends on the method of detection used. If the detection method involves the opening of the test tubes enriched with amplification products (detection by electrophoresis or hybridization analysis), then the detection area must be placed as far as possible from the other two areas (another floor, a different building) and must have its own ventilation system that has no links to the ventilation systems of the other areas. This is a key design requirement for a PCR laboratory.

In addition to that, it is also advisable to have separate rooms for changing and storing outerwear, eating, and a general storage room for laboratory materials. All rooms must be equipped with short wave ultraviolet lamps. Laminar air flow safety cabinets must be installed for the treatment of clinical samples. These ensure the safety of personnel working with infected material; their internal surfaces must be pretreated with ultraviolet light for prolonged periods of time. The reaction mix must be prepared in a PCR cabinet equipped with AC power outlets, fluorescent and ultraviolet lamps. The entire operation space must have necessary equipment and expendables, including smocks and spare footwear, with each set assigned to specific rooms. All test tubes, supports etc. shall be permitted only to move from the clean area to the sample preparation and detection areas. Clinical samples that arrive at the laboratory must be treated as soon as possible (DNA and RNA must be isolated) in the sample preparation area. Amplification test tubes prepared in the clean area must have DNA samples put in inside the sample preparation area and then moved to the amplification area. Test tubes with positive controls or clinical samples must never be taken into the PCR box for the preparation of the reaction mix (the clean area) whether prior to or after treatment. After the thermocycling has been completed the test tubes must be carried into the detection area without their caps being opened. A separate laboratory assistant must be assigned if gel-electrophoresis is used as the detection method. If fluorescent probe hybridization during amplification is used as the detection method there is no need to open the test tube after completing PCR; this eliminates the danger of a large number of amplicons getting out into the external environment, consequently, the probability of contamination is significantly reduced. In this case there is no need to have a separate detection room.

More Less

Product category: Gene tests / molecular biological diagnostic

"Tercyc" Multi-block Thermocycler

The four-block thermocycler Tercyc is designed to perform the incubation of polymerase chain reaction mixes in 0.5-ml test tubes. The device is designed as a single module comprising 4 independently controlled thermoblocks.

Special features:
Each thermoblock can hold up to 10 test tubes with the volume of the reaction mix ranging from 10 to 50 ul; The device supports three methods of regulating the temperature of a reaction mix: Passive (based on the temperature of the unit); Two active methods (a mathematical model): Fast; Precise; The LCD display allows for programs to be entered and for thermocycling to be controlled and operated without the need for a regular PC; The device can work with any IBM compatible PC; Low variation of temperature within a thermoblock; Noiseless operation. The quality of the reaction is improved significantly due to more accurate conditions for primer annealing, ensuring high activity of the Taq DNA polymerase and reducing the accumulation of non-specific amplification products.

Availability of multiple block makes possible to:
Simultaneously perform several assays for integrated tests;
Have several users operating the device at the same time;
Expedite the optimization of new reaction conditions;
Treat up to 40 samples using the same program regimen during large-scale tests.

More Less

Product category: Gene tests / molecular biological diagnostic

PCR cabinet

The PCR box/cabinet is designed for organizing a space in a clinical, diagnostic or PCR laboratory that is isolated from the external environment. 


The front glass panel smoothly slides up and can be fixed in position at any height; An embedded set of AC power outlets allows laboratory equipment to be connected to power inside the box; An antibacterial exciter controlled by an electronic timer; ultraviolet radiation is blocked when the front glass panel is opened and when the PCR box is switched on; The body is made from coated stainless steel and glass. This type of design prevents corrosion when the surface is treated with aggressive detergents (hydrochloric acid, chlorine based and other types of solutions); The body is made with high precision lasers from one sheet of stainless steel to reduce the number of seams and gaps and to ensure effective radiation and treatment of the internal surfaces with detergents; The working space is 1200 x 600 mm which makes it possible to have a full-fledged working place inside the PCR box. The lighting of the work desk is sufficient for high precision work; convenient layout and ease of operation make the box indispensable when carrying out large numbers of routine laboratory tests.  

More Less

Product category: DNA analysis

Elf Power Supply-8

ELF-8 power supply is designed for electrophoresis of nucleic acids and proteins in agarose and acrylamide gels.

preferable for acrylamide gels;
capable of operation voltage regulation, current stabilization or stabilization of power;
a built-in timer allows you to disable the electrophoresis after a specified period of time, which prevents the loss of the results of electrophoresis due to excessive distillation.

More Less

About us

Company details

Today the majority of Russia's diagnostic PCR-laboratories are equipped with thermocyclers made by DNA-Technology. Our company was the first in Russia to begin introducing fluorescent detection of PCR products in laboratory tests on a large scale, using both a variety of reagent sets and its own made-up equipment.

Today the FLASH technology has become popular not only in Russia but also worldwide. One of Russia's first real-time thermocyclers was developed, introduced into practice and registered by DNA-Technology. The mobile PCR-laboratory developed by the Company is unique in its kind. For its achievements the Company received awards at the 3-rd international congress 'Biotechnology: "Current State and Development Prospect", by the Moscow Regional Duma, The Rear Echelon Directorate of the Armed Forces.

DNA-Technology plans to continue developing advanced science and technologies and expand cooperation with scientific and clinical institutions. The Company actively cooperates with leading experts in PCR and molecular biology to keep abreast of the latest science and technology developments not only in Russia but also in the rest of the world. As a result of successful work by our team, today our company manufactures:

Main equipment for PCR-laboratories:

Fluorescence PCR detectors
Power supplies
Sets of reagents for detecting viral blood infections;
Reagents for detecting STD;
Sets of reagents for HLA-typing;
Sets of reagents for detecting genetically modified ingredients in food, raw materials and fodder;
Sets of reagents for detecting bacterial infections.

The company also:

Trains laboratory personnel in how to apply the PCR-method;
Consults customers on how to organize PCR-laboratories;
Supplies the complete range of equipment for PCR-laboratories.

All products of DNA-Technology have state registration certificates of the Ministry of Healthcare and Social Development of the Russian Federation permitting them to be used in clinical laboratory diagnostics. The devices developed by the company are recommended by many laboratory test guides as the equipment necessary for PCR-testing.

More Less