Manufacturers

PakuMed medical products gmbh

Im Löwental 79 , 45239 Essen
Germany

Telephone +49 201 347097-0
Fax +49 201 437097-29
info@pakumed.de

Trade fair hall

  • Hall 13 / A62
 Interactive Plan

Hall map

MEDICA 2016 hall map (Hall 13): stand A62

Fairground map

MEDICA 2016 fairground map: Hall 13

Our range of products

Product categories

  • 01  Electromedical equipment / Medical Technology
  • 01.03  Therapie and physical medicine
  • 01.03.01  Dialysis equipment
  • 01  Electromedical equipment / Medical Technology
  • 01.03  Therapie and physical medicine
  • 01.03.01  Dialysis equipment
  • 01.03.01.02  Haemodialysis equipment and accessories

Haemodialysis equipment and accessories

  • 01  Electromedical equipment / Medical Technology
  • 01.03  Therapie and physical medicine
  • 01.03.01  Dialysis equipment
  • 01.03.01.03  Peritoneal dialysis equipment and accessories

Peritoneal dialysis equipment and accessories

  • 01  Electromedical equipment / Medical Technology
  • 01.03  Therapie and physical medicine
  • 01.03.03  Implants and protheses

Implants and protheses

  • 01  Electromedical equipment / Medical Technology
  • 01.03  Therapie and physical medicine
  • 01.03.04  Infusion technology equipment

Infusion technology equipment

  • 01  Electromedical equipment / Medical Technology
  • 01.03  Therapie and physical medicine
  • 01.03.04  Infusion technology equipment
  • 01.03.04.04  Blood cell separation (haemapheresis system)

Blood cell separation (haemapheresis system)

  • 01  Electromedical equipment / Medical Technology
  • 01.03  Therapie and physical medicine
  • 01.03.04  Infusion technology equipment
  • 01.03.04.22  Canulae (hollow needles)

Canulae (hollow needles)

  • 01  Electromedical equipment / Medical Technology
  • 01.08  Surgery and Endoscopy
  • 01.08.02  Surgical instruments and products

Surgical instruments and products

  • 01  Electromedical equipment / Medical Technology
  • 01.08  Surgery and Endoscopy
  • 01.08.02  Surgical instruments and products
  • 01.08.02.18  Implantable catheters and long-term access systems (portsystems)

Implantable catheters and long-term access systems (portsystems)

Our products

Product category: Dialysis equipment

TITAN-PORT D (DIALYSIS - SINGLE LUMEN/DOUBLE LUMEN)

TITAN-PORT D (dialysis) is a fully implantable, titanium PORT system providing an access facility for per-forming veno-venous dialysis. The set contains two identical port chambers with a self-sealing silicone membrane and a double lumen polyurethane cathe-ter each case with one inlet and one outlet connec-tion to a Port chamber, and two srews for fixation of catheter to port outlets. Each system also includes two special puncture needles, introducer set, tunnel-izer, user instructions and patient ID documentation.

The port chamber consists of hypoallergenic, bio-compatible titanium. This material is non-magnetic. The chamber has the following dimensions: width 24 mm, length 36 mm, height 17.5 mm, weight 25g, internal volume 0.6ml, outlet pipe diameter 3.5 mm. The base has 2 suture openings for securing the system to the fascia. Port chamber and catheter can be disconnected and are interconected via a srew twist mechanism that is connected with a sleeve to the outlet pipe.

The silicone membrane in the port can be punctured up to 1000 times with a suitable noncoring puncture needle. The membrane possesses high pressure stability and holds the needle securely in position.

There are 2 different systems available – with double-lumen PUcatheter 14 F and single-lumen silicone catheter 12 F

The doublelumen polyurethane catheter 14 F has two openings at the distal end corresponding to the doublelumen construction, recognizable also by the markings on the connecting piece. The longer seg-ment is for afferent blood flow, the posterior opening with two additional lateral openings are for efferent blood flow (see illustration). The internal volume of the longer catheter portion is 2.3 ml, the shorter one is 2.2 ml. Mixture of the blood is minimized and insignificant for the blood washing effect by the mandatory separation of the openings and the natural direction of blood flow of venous blood to the central vessels. The efferent and afferent sections of the catheter are connected to the two implanted ports. These may be shortened as required.

The single-lumen silicone catheter 12 F, with an outer diameter 4.0 mm, an inner diameter 2.5 mm, total length 40 cm and internal volume 1,6 ml, has 6 lateral holes at the distal end a round tip and if necessary the catheter can be shortened at the proximal (unperforated) end. After implantation, the distal round tip prevents flotation of the catheter tip at the implantation site, e.g. due to suction or pulsation in the blood vessel and reduces adsorption at the vessel wall, thereby also improving the flow rate.

Only the special puncture needles for dialysis ports provided must be used for puncturing the membranes.

In order to achieve the blood flow rate needed for dialysis, appropriately large lumen needles are required e.g. DPK 1835 and DPK 2035. These are specially bevelled to prevent fragmentation of sili-cone particles and puncture defects of the mem-brane. Each system includes two appropriate can-nulae. These are available separately for further applications.

The patient ID documentation included is filled out fully by the physician who performed the implanta-tion, and is handed to the patient who should always carry this document with him.

These user instructions should also be available to nursing staff and physicians responsible for further care.

The contents of the set are stated on the label of the double sterile blister packaging.

More Less

About us

Company details

PakuMed medical products gmbh is a German company founded in 1990 specialized in the development, manufacture and distribution of special medical products. PakuMed is certified according to EN ISO 13485 + EN ISO 9001.

Highly qualified medical competence, flexibility and close cooperation with our customers as well as best service are our strong points.
Our aim is customer satisfaction with high quality products at reasonable prices.

Our mode of distribution includes direct delivery to hospitals, private medical practices and pharmaceutical wholesalers. Major distribution is implemented with the aid of continuously trained distribution associates trained in our product line in Germany and abroad.

Our product quality meets highest international standard and is constantly reviewed.
New product concepts are designed and manufactured promptly to meet the needs of our users. We cooperate exclusively with renowned manufacturers and suppliers and all products are "Made in Germany".

More Less

Company data

Foundation

1990

Area of business

Electromedical equipment / Medical Technology