Manufacturers

GINEVRI srl

Via Cancelliera, 25B , 00041 Albano Laziale (Rome)
Italy

Telephone +39 06 93459330
Fax +39 06 93459393
export@ginevri.com

Trade fair hall

  • Hall 11 / D03
 Interactive Plan

Hall map

MEDICA 2016 hall map (Hall 11): stand D03

Fairground map

MEDICA 2016 fairground map: Hall 11

Our range of products

Product categories

  • 01  Electromedical equipment / Medical Technology
  • 01.03  Therapie and physical medicine
  • 01.03.15  Ultraviolet and Infrared radiation equipment

Ultraviolet and Infrared radiation equipment

  • 01  Electromedical equipment / Medical Technology
  • 01.03  Therapie and physical medicine
  • 01.03.15  Ultraviolet and Infrared radiation equipment
  • 01.03.15.01  Medical phototherapy equipment

Medical phototherapy equipment

  • 01  Electromedical equipment / Medical Technology
  • 01.04  Intense medicine / anesthesiology / respiration
  • 01.04.02  Respiration equipment

Respiration equipment

  • 01  Electromedical equipment / Medical Technology
  • 01.04  Intense medicine / anesthesiology / respiration
  • 01.04.02  Respiration equipment
  • 01.04.02.02  Non invasive ventilation, devices for

Non invasive ventilation, devices for

  • 01  Electromedical equipment / Medical Technology
  • 01.04  Intense medicine / anesthesiology / respiration
  • 01.04.02  Respiration equipment
  • 01.04.02.03  Emergency and transport respiration equipment

Emergency and transport respiration equipment

  • 01  Electromedical equipment / Medical Technology
  • 01.04  Intense medicine / anesthesiology / respiration
  • 01.04.02  Respiration equipment
  • 01.04.02.05  Oxygen-ozone therapy, equipment for

Oxygen-ozone therapy, equipment for

  • 01  Electromedical equipment / Medical Technology
  • 01.04  Intense medicine / anesthesiology / respiration
  • 01.04.03  Incubators
  • 01  Electromedical equipment / Medical Technology
  • 01.04  Intense medicine / anesthesiology / respiration
  • 01.04.05  Oxygen equipment

Oxygen equipment

  • 01  Electromedical equipment / Medical Technology
  • 01.09  Hospital and Care equipment
  • 01.09.02  Ward equipment and apparatus

Ward equipment and apparatus

  • 01  Electromedical equipment / Medical Technology
  • 01.09  Hospital and Care equipment
  • 01.09.02  Ward equipment and apparatus
  • 01.09.02.07  Children's cots

Children's cots

  • 01  Electromedical equipment / Medical Technology
  • 01.09  Hospital and Care equipment
  • 01.09.05  Neonatal care equipment

Neonatal care equipment

  • 01  Electromedical equipment / Medical Technology
  • 01.10  Furnishing
  • 01.10.02  Furnishings / Equipment for baby units

Furnishings / Equipment for baby units

  • 03  Diagnostics
  • 03.01  Clinical chemistry
  • 03.01.01  Bilirubinometers/bilimeters

Bilirubinometers/bilimeters

Our products

Product category: Incubators

Baby Shuttle


The BABY SHUTTLE is microprocessor driven, it controls all the parameters necessary to obtain the ideal microclimate for the premature baby in any environmental condition. The desired parameters values are set through soft-touch sealed keys arranged in an intuitive and error free pattern.

Data are displayed on colour LED or LCD screen.

The hood grants the maximum strenght and a thermal insulation and is also crushproof. This opening system, allows the maximum operability into the space patient even if the useful height of the means of transport is limited.

The Baby Shuttle transport incubator is equipped with the Smooth Tilt bed positioning system which allows the continuous and smooth adjustment of the posture bed.

The main module of the BABY SHUTTLE incubator - TEMP MODULE - thermo-regulates the temperature in the AIR mode with proportional heating, controls the battery charging and the incubator's safety systems.

In addition sevo control in SKIN mode with proportional heating - SKIN MODULE - is available.

The Baby Shuttle incubator is equipped with a Battery Pack including two high capacity sealed up batteries , with internal gas recombination, to guarantee an autonomy over the limit of 90 minutes according to the safety rules thus ensuring the maximum efficiency of all the parameters.

This quality allows the Baby Shuttle to be air-transported. The Baby Shuttle accepts a double external power supply, 12 VDC and 230 VAC, with an automated selection of the power source and it, automatically, charges the batteries through the main power.

More Less

Product category: Incubators

Polytrend

In the last 40 years GINEVRI has designed and manufactured neonatal incubators which have always been characterized by their original technical solutions and up-to-date performances. Reliability and user friendliness have always been typical of the philosophy that has guided GINEVRI in the design of its line of incubators OGB Polytrend:

- UNBREAKABILITY AND LIGHTNESS of the hood, the base and the other main components, completely made of one-piece injection moulded Polycarbonate;
- HIGH REDUCTION OF INFECTIONS RISK, with the possibility of easy and complete disassembly of the incubator for cleaning and disinfection;
- WIDE HOOD, with two main doors and six port holes as a standard;
- ELECTRONIC SERVO-CONTROL of AIR and SKIN TEMPERATURE, and, on request, of RELATIVE HUMIDITY and OXYGEN CONCENTRATION.
In the Poly trend infant incubators, besides the longstanding GINEVRI traditions of reliability and performances, the latest technology is now at the service of caregivers:
- LCD screen
- Trends display
- Advanced full modularity
- Functions update via software
- Peripheric skin temperature monitoring

LCD SCREEN FOR GRAPHIC DISPLAY: All settings and measured values are shown on the LCD graphic display placed at the centre of the control panel. The practical encoder on the control panel allows setting all the parameters and surfing the various displays:

- the numerical values display;
- the menu display;
- the settings display;
- the time setting display;
- all the TREND displays: air temperature, skin temperature, peripheric skin temperature, relative humidity, oxygen concentration.

The LCD display and the control by means of the encoder give the maximum MODULARITY to the incubator, with the possibility of enhancing its functions just through a software updating. PERIPHERIC TEMPERATURE MONITORING: The second skin probe, placed on the baby’s foot or on a twin, allows performing a further temperature measurement.

More Less

Product category: Neonatal care equipment

Alhena and Alhena Plus

The Alhena series of Infant Warmers are considered the best for personnel “adept at work” because they permit a more direct control of the temperature, observation and also free access to the baby and to carry out in the most efficient way possible reanimation, oxygen therapy, and the execution of medical procedures which call for more than one person to be working at the same time.

The Alhena plus created by GINEVRI, respecting the current safety standards, which it fully satisfies all those requirements, supplies other services which make it a true and complete newborn therapy centre. Amongst the most important design characteristics and functions of the Alhena plus there are characteristics unique with respect to other models available on the market, the presence of a Phototherapy system created with the technical innovation of 6 Blue Power LED’s (with wavelength centred around 455nm) which make an efficient treatment of jaundiced newborns possible, being 5 or 6 times more powerful than those devices equipped with traditional fluorescent lamps.

The illumination is also provided using 4 white Daylight LED’s which make it possible to observe the baby without any altering the baby’s natural colour.

An advanced electronic control panel permits simultaneous access to all the functions using simply to understand procedures thus insuring the maximum ease of use.

The Alhena series can control the heating level by the following fuctions:

- Automatic Mode;
- Manual Mode;
- Pre-Heating Mode.

A complete set of alarms give the maximum safety of operation: the devices are supplied with both visual and acoustic alarms for HI and LOW Skin Temperature, Malfunction and/or Disconnection of the skin sensor probe and Power Loss. The Apgar module permits monitoring of the Apgar index by means of a digital timer and an acoustic signal at intervals of 1, 3, and 5 minutes from activation.

The manouverability of the patient bed, adjustable in a 360° arc using a round tilting system and equipped with sidewalls individually capable of being folded down and also removable confirm the distinctive characteristics of the GINEVRI neonatal therapy centres.

More Less

Product category: Non invasive ventilation, devices for

Climatic Tent 2000

The Climatic Tent 2000 is equipped with a pneumatic “High-flow nebulizer”, a light-weight and mobile stand on four pivoting castors, a rod with three hooks to support the canopy, Close Top type, to create an isolated microclimate, with four vertical zippers to facilitate the access to the patient.
Inside the tent, the cooling and the air circulation allow to change the temperature from 3° C to 8° C under the environmental temperature.
The umidification is achieved through a pneumatic high-flow nebulizer which operates using Air.
The nebulizer has a reservoir and it can house a jar (optional) for the nebulization of drugs.

More Less

Product category: Non invasive ventilation, devices for

Climatic Tent 1000

The Climatic Tent 1000 consists of an “High-output” Nebulizer with aerosol feature, a bottle having a capacity of about 400 c.c., a transparent canopy opened on the top, and a stand for support of the Nebulizer and canopy and one base with castors supporting the all equipment. It is utilizable in every case is required an humid atmosphere with limited cooling.

Cooling of the tent is, in part, accomplished by evaporative cooling between the high humidity air within the canopy and the ambient air. The canopy provided is an open top design. This feature allows convenction currents to be set up between the canopy and its surroundings: thus additionally reducing the temperature within the canopy.

More Less

About us

Company details

Ginevri is an independent company focused on the manufacture of advanced medical equipment and solutions for Neo-natal Care .The company has accumulated many years of experience concerning the complex and innovative requirements of these medical devices and how they need to be improved with the latest new technologies available. GINEVRI has invested in research and development to such an extent that the company is accredited to the ISO 9001:2008 and ISO 13485:2003 quality standards and all products comply with the appropriate European CE marking Medical Directives.

GINEVRI 's head office is based in the industrial area of Albano Laziale , only 20 km from Rome. The company's product design and manufacturing facility is centred around our purpose built premises where assembly and testing, after sales servicing when not performed on site, logistics and all administration functions are carried out in a modern environment. Most component parts are produced in-house with the latest CNC machining centres, thereby ensuring that all rigorous international quality requirements are met.

The company markets its products in Italy through its own, highly trained, direct sales force. In addition, it is very actively expanding its efforts in the international market, which now accounts for over 50% of sales .This successful activity is achieved and supported via a qualified network of specialist distributors in more than 40 countries.

The challenge for Ginevri’s team is to support the latest developments of clinical research with completely innovative devices covering the requirements of the scientific community.
GINEVRI’s traditional range of products includes :Infant Incubators , Transport Incubators, Infant Warmers, Radiant Heaters and Phototherapy Lamps including Fiber Optic Bili Lights as well as Baby Cots, Bilimeters and Oxygen Tents. All our systems are completed with an extensive range of available accessories.

Currently Ginevri has been focusing its research on the newest technologies in the field of neo-natal non-invasive respiratory care enhancing the nCPAP ventilatory support by delivering ventilator breaths via nasal prongs which are synchronized with the infant’s respiratory flow, in nSIPPV and nSIMV mode.
The company is very proud to have launched onto the global marketplace the Giulia neo-natal nasal ventilator, in which all the newest non-invasive ventilation modes are at the disposal of the new-born, who can now be treated with the most efficient and up to date techniques applied in a gentle way.

Whilst we at GINEVRI clearly recognize the importance of a technologically advanced instrument system, we similarly believe that any product is only as good as the after sales service which supports its performance. It is for this reason that we work everyday to provide a customer support service which is designed for the total customer satisfaction.

More Less

Company data

Sales volume

1-9 Mio US $

Export content

max. 50%

Number of employees

20-49

Foundation

1954

Area of business
  • Electromedical equipment / Medical Technology
  • Diagnostics