Manufacturers

Clippard Europe S.A.

Rue du Bosquet, 6, Parc Scientifique Einstein , 1348 Louvain-la-Neuve-Sud
Belgium

Telephone +32 1045 2134
Fax +32 1045 2526
info@clippard.be

Trade fair hall

  • Hall 8b / G07
 Interactive Plan

Hall map

COMPAMED 2016 hall map (Hall 8b): stand G07

Fairground map

COMPAMED 2016 fairground map: Hall 8b

Our products

Product category: Miniature tubings, Valves, miniature

New! NPV Series Pinch Valves

The NPV Series Pinch Valve is a solenoid-operated device that is designed to open and close tubes for controlling flow of liquids and gases. While other types of valves have internal passages that may cause small amounts of fluid to remain in the valve, pinch valves have no areas or dead volume where fluid can become trapped. Only the inside of the tubing contacts the fluid.
 
• Small, compact design
• Hygienic and easy to clean
• Low power consumption
• High cycle life
• Able to handle whole blood and particulate matter
• Unobstructed flow path
• Medical grade silicone tubing

More Less

Product category: Miniature tubings, Valves, miniature, Valves, proportional

New! 7 mm Electronic Valve

The same long life you depend on from Clippard's original EV line of electronic valves, now in a 7 mm cartridge package! These direct actuating valves offer an extremely fast response time for accurate dosing of minute volumes.

• Extremely small dead volume
• Low vibration and noise
• Fast response time
• Low energy consumption
• Expected life of over 1 billion cycles!

More Less

Product category: Valves, miniature, Valves, proportional

New! NIV Series PTFE Media Isolation Valves

The NIV Series Media Isolation Valve is a solenoid-operated device that uses a flexible diaphragm to isolate the actuation mechanism from the fluid path. Media isolation valves are commonly used for a wide variety of applications, including those that require precise, repeatable dispensing of media for analytical instrumentation.

• Low power consumption
• Compact, lightweight design
• Bidirectional
• Zero dead volume
• All wetted areas PTFE
• Ideal for use with corrosive media
• High cycle life
• Fast response time

More Less

Product category: Valves, miniature, Valves, proportional

Check Valves

Check valves allow flow in one direction and automatically prevent flow in the opposite direction. Clippard check valves feature durable brass body construction with Nitrile seals and a stainless steel spring. A variety of porting options are available.

More Less

Product category: Valves, miniature, Valves, proportional

Drawback Valves

Pilot actuated water drawback valves are ideal for use in quenching or water spray applications. When closed, a spring-based internal piston draws back a small volume on the outlet side.

More Less

Product category: Valves, miniature, Valves, proportional

Electric & Pneumatic Switches

Air operated electric switches convert air pressure to an electrical signal, providing an interface between pneumatic systems and electrical controls.

More Less

Product category: Valves, miniature, Valves, proportional

Exhaust Valves

Quick exhaust valves are primarily used to increase cylinder cycle speeds. Clippard J-Series quick exhaust valves also enable the use of smaller directional control valves and longer control lines, and can be used as a shuttle valve. These quick exhaust valves feature a compact, durable brass construction with molded Nitrile seals.

More Less

Product category: Valves, miniature, Valves, proportional

10 & 15 mm Electronic Valves

Offered in both Normally-Open or Normally-Closed models, these 2-way and 3-way valves are perfect for small areas where compact electronically-controlled pneumatics are needed.

• 2-Way or 3-Way operation
• Detachable coil and body
• Variety of circuit features
• Manifold options available
• Multiple connectors—snap-in plugs,
  wire leads, custom plugs, DIN

More Less

Product category: Valves, miniature, Valves, proportional

2013 Series

These 3-Way Normally-Closed electronic valves feature a low-power DC solenoid and can be directly converted to high pressure pneumatic power without electronic amplification.
 
• Special bleed pilot
• Fast response
• Less than 0.50 Watts
• 22 scfm @ 100 psig (634 L/min @ 7 bar)

More Less

Product category: Valves, miniature, Valves, proportional

DV Series

Designed as the next generation of Clippard's well-known and trusted EV Series, the powerful DV Series is compact, quick and built to last—over 1,000,000,000+ cycles! With a solid, compact design and extremely high flow rates, these valves are well-suited for many applications in a wide variety of different industries including medical, analytical, packaging, manufacturing and more.

• Designed to accommodate large flows
  with more stroke
• Fast response time
• Industry standard for leak-free operation
• Low heat rise
• Low power consumption
• 1,000,000,000+ cycle life

More Less

About us

Company details

Founded in 1941 by W. L. Clippard, Jr., the company started out manufacturing electronic test equipment. In the 1950’s, Mr. Clippard recognized a need for miniature pneumatic devices in manufacturing, and began to produce a small line of component products. The appeal of these products was such that by the late 1960’s, Clippard Instrument Laboratory was strictly a pneumatic manufacturer.

The company has continued to have steady growth through the years bolstered by periodic introductions of new and innovative products. These have included such products as the Modular series and the Mouse Valve series; the Electronic Proportional Valves, and Electronic Manifold Cards.

Today, the company remains family-owned and operated. Manufacturing facilities are located in Cincinnati and Fairfield, Ohio; as well as a distribution and technical support center in Louvain-La-Neuve, Belgium.

Clippard is in its seventh decade of supplying fluid power, motion and process control devices to the Scientific, Medical, Dental, and Analytical markets. We understand the need for precision, reliability and purity in your critical applications and are dedicated to providing expert solutions to meet and exceed your expectations. We ensure that every product meets the highest standards of quality and performance by 100% testing all products before they reach our customers.

In addition to the Scientific market segment, Clippard offers expertise in a wide variety of markets utilizing numerous types of applications. From Semiconductor to Printing, Automotive to Packaging, our products are engineered to the exact specifications you require. Supported by a platform of over 5.000 standard products, as well as customized solutions, we have the capability to provide you with a full range of products designed to meet the unique demands of your application.

More Less