Manufacturers

INTROTEK INTERNATIONAL LP

150, Executive Drive , 11717 Edgewood
USA

Telephone +1 631 242-5425
Fax +1 631 242-5260
sdidio@introtek.com

Trade fair hall

  • Hall 8a / S23
 Interactive Plan

Hall map

COMPAMED 2016 hall map (Hall 8a): stand S23

Fairground map

COMPAMED 2016 fairground map: Hall 8a

Our range of products

Product categories

  • 02  Electrical and electronic components
  • 02.15  Transducers

Transducers

  • 10  Equipment and technologies for laboratories and manufacturing
  • 10.01  Laboratory equipment
  • 10.01.04  Detectors

Our products

Product category: Sensors, Detectors

AD8 / AD9 SERIES SENSOR

INTROTEK® AD8 / AD9 air bubble detection sensors incorporate Introtek’s latest generation “MEC” pulse-type ultrasonic circuitry. The micro-controller based circuitry is located integrally in the sensor assembly. Custom algorithms to control functionality, such as response times, time delays and more can be designed at Introtek based on customer requirements. The AD8/ AD9 series sensors are one of the most commonly utilized air bubble detectors for patient connected devices worldwide.

More Less

Product category: Detectors

PLD Point Level Detector

The INTROTEK® Point Level Detector (PLD) is extremely user friendly with a sleek, compact design incorporating integral electronics that never require calibration. The PLD is the most advanced non-invasive, pulse-wave ultrasonic sensor available for liquid level detection with the emphasis on reliability, accuracy, and repeatability.

More Less

Product category: Detectors

PAD Point-Air Detector

INTROTEK® Point-Air Detection (PAD) Sensors incorporate the state-of-the-art, patented pulse-type ultrasonic circuitry. Integral to the sensor’s assembly, the Micro-Electronic Controller (MEC) features programmable algorithms for functionality control. Response times, time delays, and other functions are programmed in accordance to specific requirements.

More Less

Product category: Detectors

CLM Continuous Level Detector

INTROTEK's® Continuous Liquid Level Detector (CLM) is available in standard configuration. The unique pulsed ultrasonic technology and non-invasive design enables bottom up continuous liquid level detection in a variety of fixed vessels and tanks to be monitored quickly, accurately and dependably.

More Less

Product category: Detectors

CLD Continuous Level Detector

The INTROTEK® Continuous Level Detector (CLD) is available in a standard configuration (pictured at left), as well as customized designs to meet customer application requirements. The unique pulsed, non-invasive design enables the liquid level from the bottom of a vial container or tank to be monitored quickly, accurately and dependably.

More Less

Product category: Detectors

Mini Blood Component Detector

INTROTEK® miniaturized Blood Component Detector performs optical-based detection non-invasively for fluid within clear tubing for many critical processes.Unwanted elements in fluid can be detected in order to ensure the safety of a procedure or process. The Blood Component Detector is available in several configurations. These configurations support different interfaces and are considerations based on the intent or type of design integration. 

More Less

Product category: Sensors

DDS Drip Detect Sensor

INTROTEK's Drip Detect Sensor can be customized & designed to fit any drip chamber. This sleek, noninvasive designed sensor outputs a pulse for each drop of liquid accurately and dependably, thereby eliminating the need for time-consuming, visual drip count monitoring at patient site for flow rate.

More Less

Product category: Sensors

DRIP CHAMBER ULTRASONIC LIQUID LEVEL SENSORS

INTROTEK® Non-Invasive Drip Chamber Level Sensors are custom designed for use with soft-bodied drip chamber or larger OD tubing to overcome conditions such as relaxation, slippage or vibration, which would normally cause false air alarms. Each sensor is custom designed for the specific drip chamber and is available with single and multipoint detection. These sensors are designed to meet OEM form, fit and functional specifications for various diameters and tapers.

More Less

Product category: Sensors

MABS – MINIATURE AIR BUBBLE SENSOR

INTROTEK® Non-invasive Mini Air Bubble, Air-in-line sensors, incorporate Introtek’s pulse ultrasonic technology into a very compact, free entry design. Perfect for Syringe and Infusion Pumps where space is limited. The Mini Air Bubble Detector is available with remote or integrated electronics. Chip integration, the most cost effective and elegant interface to a device is available as well. Each sensor is built to INTROTEK unsurpassed quality and is 100% factory-tested before shipment. As a value-added provider, INTROTEK will integrate special components to supply custom sensor packages.

More Less

Product category: Sensors

BD8/BD9 SERIES AIR BUBBLE SENSOR

INTROTEK® BD8 / BD9 series free entry, non-invasive air bubble detection sensors incorporate Introtek’s pulse ultrasonic technology into an integral package. The requirement for remote electronics is eliminated, which further increases immunity to EMI / RFI interference, while operating with fail-safe logic. The BD8 / BD9 series sensors allow for up to 24 volt power input requirements and where a mounting base may be desired. Custom algorithms to control functionality, such as response times, time delays and more can be designed at Introtek based on customer requirements.

More Less

Product category: Sensors

BDR / BDS / BDRI SERIES SENSORS

INTROTEK® BDR and latest generation BDRI clamp-on type sensorsare primarily used for non-invasive Air-in-line and point liquid level detection.These sensors are designed to work with a wide range of tubing materials and sizes. In conjunction with Introtek circuitry they provide the most reliable clamp-on Air-in-line and liquid level detection available. The BDR & BDRI clamp-on sensors are recommended for applications where a mounting base is not a requirement. Depending on customer requirements, a variety of electronic options are available. INTROTEK® BDS strap-on style sensors, are utilized for point liquid level & air / liquid column detection on a variety of tubing or fluid reservoirs sizes and geometries. Standard designs can be mounted with a clamp or strap to help position the sensor. For OEM, OEM applications, various geometries, surface curvatures, multi-point options, etc. can be custom designed to meet the exact form, fit and functional specifications, for eventual integration into a device.The BDS has no moving parts and is a simple uni-body construction.

More Less

About us

Company details

Introtek has excelled for over 35 years as a leading supplier of non-invasive fluid detection devices. Since it’s early conception, Introtek has maintained its commitment in providing safe, reliable products to ensure customer satisfaction.

Introtek Sales Team works closely with our customers to provide Introtek solutions to meet their "Total Fluidic System" requirements.

Introtek’s Engineering Design Team specializes in taking custom requirements from concept to completion using highly innovative ideas, while working closely with the customer in order to obtain maximum results.

Introtek’s Manufacturing Team is a highly trained group of individuals dedicated to producing top-rated quality products while consistently meeting customer delivery dates.

The entire organization stands behind our Company Quality Policy:

We are committed to design, manufacture, and deliver total quality
products that will completely satisfy the needs and expectations of
our customers.

This is accomplished by the implementation of a program of
continuous improvement, which works towards the reduction,
elimination, and prevention of nonconformities.

Contact Introtek today with your specific needs and let us work with you in obtaining your goals.

More Less

Company information as a PDF file