Manufacturers

EFORE SPA

Via Jesina, 56/A , 60022 Castelfidardo
Italy

Telephone +39 071 721461
Fax +39 071 72146539
info@efore.com

Trade fair hall

  • Hall 8b / G03
 Interactive Plan

Hall map

COMPAMED 2016 hall map (Hall 8b): stand G03

Fairground map

COMPAMED 2016 fairground map: Hall 8b

Our products

Product category: Power supplies, power protection systems, power converters

MFA160 Medical Grade Power Supplies

The MFA160 medical grade AC/DC power supply series offers high efficiency >90%, conducted noise compliance to level B and a low leakage current. A second variation of the MFA160 offers class 2 insolation. The MFA160 is the smallest class 2 160W power supply with medical approvals on the market today.  This variation also complies with the 3rd edition of the IEC 60601-1 safety standard. Thanks to its enhanced creepage and clearance of >8 mm, it can be operated beyond 4000m of altitude without de-rating.

The series carries UL60601 and EN60950 safety approvals and complies with EN61000-3, EN61000-4 and EN55022-B EMC standards.

90 - 264 VAC input voltage range
160 W with Active PFC power supply
Small form factor 2" x 4" x 1" (51 x 102 x 27mm)
Efficiency >91% typical
5, 12, 24 & 48 VDC standard output variants
+12 V auxiliary fan output
4000 altitude operation
Approved to ANSI/AAMI ES60601-1 (2005 + C1:09 + A2:10)

Applications



Class I & Class II medical electronics
Class I & Class II dental electronics
Laboratory equipment
Healthcare diagnostics equipment


More Less

Product category: Power supplies, power protection systems, power converters

DDP600 U-Chassis Medical Grade Power Supplies

The DDP600 medical grade U-chassis power supplies provide a steady 600 watts of regulated DC power through the extended 85 to 305 VAC input voltage range, all in a 4.4" x 7.3" x 1.5" (107 x 178 x 41mm) form factor.
Capable of 800 watts of peak power for 10 seconds, the DDP600 U-chassis series is very well suited for applications demanding a high start-up current, while allowing for space and cost savings. The u-chassis version is very well suited for challenging system designs where low profile and low power dissipation are desired with minimal air movement.

Exceptionally high reliability is achieved with 94% efficiency for lower heat generation which facilitates better thermal management in space constrained systems.

Features

600W steady state power with 800W peak (up to 10s)
85 - 305 VAC extended input voltage range
24, 28, 36 and 48 VDC output variants
94% efficiency rating
Parallel & N+1 redundant operation
+5V standby & 12V auxiliary outputs
Low stand-by consumption (< 0.35W)
Approved to UL/CSA for ITE & lighting
Approved to IEC 60601-1 3rd edition including 2x MoPP means of patient protection
CE mark

Applications

Laboratory equipment
Dialysis equipment
Ultrasound equipment
Aesthetic laser equipment
Medical imaging
Other medical electronics

More Less

Product category: Power supplies, power protection systems, power converters

MCB600 Configurable Multi-Output Medical Grade Power Supplies

The MCB600 is a highly configurable medical grade power supply series that provides unrivalled performance and flexibility. Delivering 600 watts and up to 8 outputs from a 5” x 3” x 1U (78 x 144 x 41mm) package, the MCB600 is one of the smallest commercially available power solutions on the market today.
The MCB600 power supplies consist of an input module that provides four medically isolated slots for up to four output modules of any type and in any combination. Output modules are available in four single nominal output voltages: 5, 12, 24 and 48 VDC and one dual nominal 12 VDC output module, each offering an extremely wide voltage adjustability range. The built-in fan and speed control circuitry assures proper forced air cooling, minimizing operational noise and enhancing the service lifetime.

The MCB600 series is certified to IEC/EN/UL/CSA 60601-1 2nd and EN 60601-1, CSA C22.2 No.601.1, ANSI/AAMI ES60601-1, 3rd edition for medical equipment requiring 2xMoPP protection grade. The series meets the EN55022 EMC limits of Class B for conducted and radiated emissions as well as the EN 61000-3 and EN 60601-1-2 EMC standards.

Features

Configurable from 1 to 8 outputs
High power density (23W/in3)
Universal input voltage, Active PFC
Fan speed control function for quiet operation
Output module parallel / serial operation
+5V, 200mA bias supply
Remote voltage / current programming
Output current monitoring signal
IEC/EN/UL/CSA 60601-1, 2nd & 3rd editions, including 2xMoPP means of patient protection
CE mark

Applications

Clinical Analyzers
Laboratory Diagnostic equipment
Information technology equipment
Ventilation equipment
Clinical monitoring and Controls
Laser medical / Aesthetic equipment
Portable diagnostics
Dental equipment

More Less

Product category: Power supplies, power protection systems, power converters

MDP400 Sealed Medical Grade Power Supplies

Efore's MDP400 medical grade sealed power supplies combine exceptional performance with versatile features into a 38 cubic inch package that fits anywhere with minimal thermal or environmental limitations.
With 94% efficiency and flexible packaging and cooling options, these power supplies are the perfect choice for operating room and other electro-medical equipment where fan noise and moving air are not acceptable. The sealed version of the MDP400 is available as a conduction-cooled module in an IP67 rated case, or as a convection cooled power supply with the addition of the optional heat sink assembly.

It's super compact at 3.27 x 8.34.1.63" (82.0 x 212.0 x 41.5 mm) and weighs in at 2.87 lbs. (1300 g) without the heat sink, or 3.27 x 8.34 x 2.74" (83.0 x 212.0 x 69.5mm) and weighs 3.67 lbs. (1665 g) with the optional heat sink.

Approved to the 3rd edition of the ANSI/AAMI ES60601-1, IEC/EN 60601-1 standards for medical grade power supplies.

Features

IP67 ingress protection index
400W power output (440W peak)
Universal input voltage range (90 - 264 VAC)
12, 24, 36, & 48 VDC standard output variants
+5V stand-by and 12V auxiliary outputs
4000m altitude operation
Remote enable & DC power good signal
IEC/EN/UL 60601-1, 2nd & 3rd edition compliant, including 2xMoPP level of patient protection
UL/CSA 60950-1, 2nd editions, IEC/EN 60950-1, 2nd edition
CE mark

Applications

Medical equipment
Laboratory equipment
Computed tomography imaging
Dialysis equipment
Ultrasound equipment
Ventilators
Operating room equipment
Clean room equipment

More Less

Product category: Power supplies, power protection systems, power converters

MDP400 Top Fan Medical Grade Power Supplies

The MDP400 top-fan series of medical grade power supplies feature a compact form factor, high conversion efficiency and 2xMoPP means of patient protection. With demonstrated efficiency ratings of 94%, the MDP400 series are “80 Plus Platinum” compliant, making them the most efficient power supplies in their class.
The fan cooled versions include the latest in fan speed control. The fan speed control monitors the operating conditions and applies the absolute minimum required airflow.  This includes a "fan off" condition under light load operation (< 50W). This optimizes audible noise for fan cooled products to the lowest levels possible and maximizes fan lifetime.  An ideal combination for operating room and laboratory equipment where moving air and audible noise must be kept to the bare minimum.

Approved to the 3rd edition of ANSI/AAMI ES60601-1, IEC/EN60601-1 standards for Medical Power Supplies.

Features

94% efficient
400W power output (440W peak)
Universal input voltage range (90 - 264 VAC)
12, 24, 36, & 48 VDC standard output variants
+5V stand-by and 12V auxiliary outputs
4000m altitude operation
Remote enable & DC power good signal
IEC/EN/UL 60601-1, 2nd & 3rd edition compliant, including 2xMoPP level of patient protection
ANSI/AAMI ES60601-1 2nd/3rd edition compliant
CE mark

Applications

Laboratory equipment
Dialysis equipment
Ultrasound equipment
Aesthetic laser equipment
Medical imaging equipment
Medical electronics equipment

More Less

Product category: Power supplies, power protection systems, power converters

MDP400 Perforated Cover Medical Grade Power Supplies

The MDP400 perforated cover series of single output medical grade power supplies are 2include 2xMoPP level of patient protection and are available in standard voltages of 12, 24, 36 and 48 VDC, with auxiliary 12V fan and 5V stand-by outputs.
The MDP400 perforated cover medical grade power supplies are well suited for challenging system designs where low profile and low power dissipation are desired with minimal air movement. Its low profile is applicable for industry standard 1U medical equipment designs. Rated for 250W with free-air convection and 400W with forced air, this power supply includes an integral 12V fan output, eliminating the need for an additional fan supply. The power supply can be disabled with a logic signal and dissipates less than 0.5W in stand-by mode allowing for system level Energy Star compliance.

With typical efficiencies of 94% and efficiency load profiles that exceed 80 Plus Platinum requirements, the MDP400 is the most efficient power supply in its class.

Features

94% efficient
400W power output (440W peak)
Universal input voltage range (90 - 264 VAC)
12, 24, 36, & 48 VDC standard output variants
+5V stand-by and 12V auxiliary outputs
4000m altitude operation
Remote enable & DC power good signal
IEC/EN/UL 60601-1, 2nd & 3rd edition compliant, including 2xMoPP level of patient protection
ANSI/AAMI ES60601-1 2nd/3rd edition compliant
CE mark

Applications

Laboratory equipment
Dialysis equipment
Ultrasound equipment
Aesthetic laser equipment
Medical imaging equipment
Medical electronics equipment

More Less

Product category: Power supplies, power protection systems, power converters

MDP400 Front Fan Medical Grade Power Supplies

The MDP400 front fan series of medical grade power supplies feature a compact form factor, high conversion efficiency and 2xMoPP means of patient protection. With demonstrated efficiency ratings of 94%, the MDP400 series are “80 Plus Platinum” compliant, making them the most efficient power supplies in their class.
The fan cooled versions include the latest in fan speed control. The fan speed control monitors the operating conditions and applies the absolute minimum required airflow.  This includes a "fan off" condition under light load operation (< 50W). This optimizes audible noise for fan cooled products to the lowest levels possible and maximizes fan lifetime.  An ideal combination for operating room and laboratory equipment where moving air and audible noise must be kept to the bare minimum.

Approved to the 3rd edition of ANSI/AAMI ES60601-1, IEC/EN60601-1 standards for Medical Power Supplies.

Features

94% efficient
400W power output (440W peak)
Universal input voltage range (90 - 264 VAC)
12, 24, 36, & 48 VDC standard output variants
+5V stand-by and 12V auxiliary outputs
4000m altitude operation
Remote enable & DC power good signal
IEC/EN/UL 60601-1, 2nd & 3rd edition compliant, including 2xMoPP level of patient protection
ANSI/AAMI ES60601-1 2nd/3rd edition compliant
CE mark

Applications

Laboratory equipment
Dialysis equipment
Ultrasound equipment
Aesthetic laser equipment
Medical imaging equipment
Medical electronics equipment

More Less

Product category: Power supplies, power protection systems, power converters

MDP400 U-Chassis Medical Grade Power Supplies

The MDP400 U-chassis series of single output medical grade power supplies are approved for 2xMoPP level of patient protection, and is available in standard voltages of 12V, 24V, 28, 36V and 48V, with auxiliary 12V fan and 5V stand-by outputs.
The MDP400 U-chassis medical grade power supplies are well suited for challenging system designs where low profile and low power dissipation are desired with minimal air movement. Its low profile is applicable for standard 1U medical equipment designs. Rated for 250W with free-air convection and 400W with forced air, this power supply includes an integral 12V fan output, eliminating the need for an additional fan supply. The power supply can be disabled with a logic signal and dissipates less than 0.5W in stand-by mode allowing for system level Energy Star compliance.

With typical efficiencies of 94% and efficiency load profiles that exceed 80 Plus Platinum requirements, the MDP400 is the most efficient power supply in its class.

Features

94% efficient
400W power output (440W peak)
Universal input voltage range (90 - 264 VAC)
12, 24, 36, & 48V standard output variants
+5V stand-by and 12V auxiliary outputs
4000m altitude operation
Remote enable & DC power good signal
IEC/EN/UL 60601-1, 2nd & 3rd edition compliant, including 2xMoPP level of patient protection
ANSI/AAMI ES60601-1 2nd/3rd edition compliant
CE mark

Applications

Laboratory equipment
Dialysis equipment
Ultrasound equipment
Aesthetic laser equipment
Medical imaging equipment
Medical electronics equipment

More Less

Product category: Power supplies, power protection systems, power converters

MDP400 Open Frame Medical Grade Power Supplies

The MDP400 open-frame series of single output AC/DC power supplies carry 2xMoPP level or patient protection and is available in standard voltages of 12V, 24V, 28V, 36V and 48V, with auxiliary 12V fan and 5V stand-by outputs.
The MDP400 open-frame medical grade power supplies are well suited for challenging medical electronics designs where low profile and low power dissipation is desired with minimal air movement. Its low profile is applicable for industry standard 1U equipment designs. Rated for 250W with free-air convection and 400W with forced air, this power supply includes an integral 12V fan output, eliminating the need for an additional fan supply. The power supply can be disabled with a logic signal and dissipates less than 0.5W in stand-by mode allowing for system level Energy Star compliance.

With typical efficiencies of 94% and efficiency load profiles that exceed 80 Plus Platinum requirements, the MDP400 is the most efficient power supply in its class.

Features

94% efficient
400W power output (440W peak)
Universal input voltage range (90 - 264 VAC)
12, 24, 36, & 48 VDC standard output variants
+5V stand-by and 12V auxiliary outputs
4000m altitude operation
Remote enable & DC power good signal
IEC/EN/UL 60601-1, 2nd & 3rd edition compliant, 2xMoPP level of patient protection
ANSI/AAMI ES60601-1 2nd/3rd edition compliant
CE mark

Applications

Laboratory equipment
Dialysis equipment
Ultrasound equipment
Aesthetic laser equipment
Medical imaging equipment
Medical electronics equipment

More Less

Product category: Power supplies, power protection systems, power converters

MFA350 Medical Grade Power Supplies

MFA350 is a series of extremely high efficiency, ultra compact, single output medical grade AC/DC power supplies.  Offering 365 W of regulated DC power from an open-frame, industry standard 3 x 5 x 1.28" form factor, the MFA350 occupies 50% less space in a system.  The extremely high density enables designers to incorporate more advanced features into their system designs without increasing system size.
By converting energy at >90% efficiency, the MFA350 generates less heat facilitating higher reliability, critical to medical device safety. The series is available in three high power output voltages at 12V, 24V, 32V, 36V and 48V, and is equipped with auxiliary low power 12V and 5V stand-by power outputs.

The MFA350 series complies with IEC/EN60601-1 safety and with EN61000-3, EN61000-4 and EN55022-B EMC standards. Conducted noise compliance to level B and a low leakage current ensure compliance with international EMC legislation.

Features



90 - 264 VAC input voltage range
365 W with Active PFC power supply
Small form factor (3" x 5" x 1.4")
Efficiency >91% typical
12, 24, 32, 36 & 48 VDC outputs
+5V standby & 12V auxiliary outputs
Low leakage current
Remote enable & DC power good signal
CSA 60601-1 3rd edition, ANSI/AAMI ES6060101:2005 compliant
CE mark

Applications



Medical electronics
Dental electronics
Laboratory equipment
Healthcare diagnostics


More Less

Product category: Power supplies, power protection systems, power converters

DDP600 Front-Fan Medical Grade Power Supplies

The DDP600 front-fan series medical grade power supplies are offered in a configuration with an internal variable speed front-fan for optimal output power and thermal management, and provides a steady 600 watts of regulated DC power through the extended 85 to 305 VAC input voltage range, all in a 4.4" x 7.3" x 1.5" (107 x 213 x 41mm) form factor.
Capable of 800 watts of peak power for 10 seconds, the DDP600 front-fan series is very well suited for applications demanding a high start-up current, while allowing for space and cost savings. The front-fanned version has a built in smart cooling solution that adjusts the fan speed to the working conditions, minimizing acoustical noise and air movement.

Exceptionally high reliability is achieved with 94% efficiency for lower heat generation which facilitates better thermal management in space constrained systems.

Features

600W steady state power with 800W peak (up to 10s)
85 - 305 VAC extended input voltage range
24, 28, 36 and 48 VDC output variants
94% efficiency rating
Parallel & N+1 redundant operation
+5V standby & 12V auxiliary outputs
Low stand-by consumption (< 0.35W)
Approved to UL/CSA for ITE & lighting
Approved to IEC 60601-1 3rd edition including 2x MoPP means of patient protection
CE mark

Applications

Laboratory equipment
Dialysis equipment
Ultrasound equipment
Aesthetic laser equipment
Medical imaging
Other medical electronics

More Less

About us

Company details

Efore Group is an international company which designs and manufactures custom and standard DC power systems and AC/DC power supplies for a wide range of demanding industry applications including telecom, industrial, medical, lighting, utility and military. Efore’s story began in March 1975 in Finland. Since then, Efore has grown from a six person engineering office to a truly global organization, operating on four continents with nearly 1000 employees and serving customers worldwide.

In 2013 Efore acquired ROAL Electronics, a recognized leader in digital power conversion and solid state lighting power products. Under the well-known ROAL brand, Efore designs and manufactures cutting edge power conversion products that offer superior energy efficiency, more intelligent designs, flexibility and creativity for the Industrial, Medical, DataCom, LED Lighting and Marine markets.

Efore's head office is based in Finland and its production units are located in China and Tunisia. Sales and marketing operations are located in Europe, United States and China.

More Less