Manufacturers

HN Group A/S

Kløvermarken 310 , 7190 Billund
Denmark [incl. Greenland]

Telephone +45 75338700
Fax +45 75353580
ah@hngroup.dk

This company is co-exhibitor of
Danish Health Tech Group (Danish Export Association)

Trade fair hall

  • Hall 8a / R11
 Interactive Plan

Hall map

COMPAMED 2016 hall map (Hall 8a): stand R11

Fairground map

COMPAMED 2016 fairground map: Hall 8a

Our range of products

Product categories

  • 11  Manufacturing Services
  • 11.15  Extrusion
  • 11.15.11  Injection moulding
  • 11  Manufacturing Services
  • 11.16  Forming
  • 11.16.37  Tooling

Our products

Product category: Injection moulding, Thermoforming, Tooling

Medical equipment

We create value for the companies in the medical equipment industry through extensive know-how, short time to market and uniform high quality.
It takes something rather special to become a preferred plastics partner for the companies in the medical equipment industry. This is why we are very proud that some of the largest and most demanding companies in the industry have assessed HN Group and found us "heavy" enough to deliver both knowledge and products.

We know that customers often opt for HN Group as a supplier after evaluating us based on four overall parameters:

Quality Control
Documentation
In-house control
Traceability

At the same time, many medical equipment customers set great store by the fact that we are one of very few suppliers in the industry that have their own tools department and can therefore design and manufacture custom tools for both injection moulding and thermoforming in-house.

In this connection, it is decisive for customers in the medical equipment industry that when we fine-tune new moulding tools, we can also provide all necessary documentation in the form of

Design of Experiments (DOE)
Outcome Questionnaires (OQ)
Performance Qualification (PQ)

Consulting and Feedback
We can contribute with knowledge and know-how as early as a product's R&D stage. And if you need to test a product or a component in small series, we can lend you a hand by manufacturing a trial tool or – if time is a business-critical factor – by implementing a rapid prototyping process.

Our consulting and professional feedback can extend to areas such as

types of plastic
design
function
production setup
quality
Contact us if you are facing a specific challenge or if you want to know more about how we can create value for your company.

More Less

Product category: Injection moulding

Injection Moulding for Medical Equipment Products. Perfection Every Step of the Way

HN Group has been supplying injection-moulded plastic solutions to many medical equipment companies, including some of the largest players in the industry. This is why we have in-depth knowledge of the rather special challenges producers are confronted with in the area, e.g. with regard to quality management and traceability.

In addition to merely manufacturing the ready products or subcomponents, our year-long experience also means that we can contribute to our customer's value chain at several other levels:

Material consulting about (types of plastic)
Design, form and function
Design and construction of moulding tools

Innovation in Plastic
Recent years' intensive research in plastic granulates and related properties has opened up hosts of opportunities for manufacturers when it comes to design, finish, function, sustainability, hygiene and quality.

The experienced plastic experts at HN Group are always ready to contribute with knowledge, advice and value-adding professional feedback. We can join your project at an early stage to ensure professional feedback with your R&D, purchasing, production and marketing departments throughout the entire process.

Rapid Prototyping
Continuous product development in the medical equipment industry often requires the ability to test new products or components – preferably without wasting even a single second. HN Group can offer here rapid prototyping, where our in-house tool production department can quickly design and build a prototype tool.

Then we install the tool to one of our 52 robotised production cells and manufacture the desired prototype, possibly testing different types of plastic in the process.

Read more about rapid prototyping.

Own Tool Department
With 12 experienced toolmakers, we can design and build any injection moulding tool at HN Group – even for challenging jobs.

When we fine-tune new tools, we provide documentation as per individual customer desires, e.g.:

Design of Experiments (DOE)
Outcome Questionnaires (OQ)
Performance Qualification (PQ)
Production Part Approval Process (PPAP)
First Article Inspection (FAI)

We can also produce trial tools and prototype tools.

Read more about HN Group's in-house tools department.

If you would like to know more about our extensive know-how and production expertise in injection-moulded plastic components for the medical equipment industry, do not hesitate to contact us.

More Less

Product category: Thermoforming

Thermoformed Products for the Medical Equipment Industry Added Value to Your Supply Chain. And Your Product

Thermoformed plastic parts from HN Group can add value to companies in the medical equipment industry in several different areas. As a year-long supplier to the industry, we have developed quality solutions for

packaging (box inserts, blister packs, etc.)
transport trays for internal/external transport
production flow with Pick & Place robots

Our plastic experts have in-depth insight into and understanding of the special challenges the medical equipment industry is often confronted with, e.g. in connection with quality control, internal control and traceability. We can join your project at an early stage in order to contribute with knowledge and ensure professional feedback to your R&D, purchasing, production and marketing departments, as desired.

Our consulting can extend to areas such as

types of plastic
design
product properties
method of production

Transport Solutions for Production of Medical Equipment
At HN Group, we have year-long experience in the development and production of thermoformed transport trays for internal/external transport and production lines involving Pick & Place robots.

To live up to all requirements placed on product securing, stacking properties, shelf life, etc., the solutions are always tailored to the specific desires of the customers.

Read more about thermoformed transport trays.

Box Inserts and Other Packaging Solutions
Our thermoforming department is equipped with 5 high-tech production lines where we produce different packaging solutions for some of the leading medical equipment companies in the world. We supply, e.g. box inserts, display packaging and blister packs.

Our specialists in this area stand at your service with know-how, experience and value-adding professional feedback on materials, design, quality, properties, etc.

Read more about thermoformed packaging solutions.

If you would like to know more about the host of opportunities thermoformed plastic products offer the medical equipment industry, do not hesitate tocontact us.

More Less

About us

Company details

HN Group is a major supplier of injection-moulded and thermoformed plastic parts for the industry in both Denmark and the rest of Europe. We have customers working in many different industries, for example, medical equipment, food, toys, electronics, hi-fi, automotive, wind and solar power as well as gas and water technology. HN Group's quality management system is certified according to ISO 13485 and ISO 9001. The company's operations rest on three pillars:

Injection moulding - Thermoforming - Moulding Tools

We are specialists in several complex areas, e.g. embedment of metal parts into plastic components and thermoforming of transport trays to support the automation of production lines, including Pick & Place robots.

Our year-long experience and extensive know-how also mean that customers from many different industries today use us as a sparring partner in their R&D work. Our innovative approach to creating new opportunities with plastic – including for components that have traditionally been produced in metal or other materials – allows us to add value and boost our customers' competitiveness.

We create value for the companies in the medical equipment industry through extensive know-how, short time to market and uniform high quality.

It takes something rather special to become a preferred plastics partner for the companies in the medical equipment industry. This is why we are very proud that some of the largest and most demanding companies in the industry have assessed HN Group and found us "heavy" enough to deliver both knowledge and products.

We know that customers often opt for HN Group as a supplier after evaluating us based on four overall parameters:

Quality Control - Documentation - In-house control - Traceability


At the same time, many medical equipment customers set great store by the fact that we are one of very few suppliers in the industry that have their own tools department and can therefore design and manufacture custom tools for both injection moulding and thermoforming in-house.

We can contribute with knowledge and know-how as early as a product's R&D stage. And if you need to test a product or a component in small series, we can lend you a hand by manufacturing a trial tool or – if time is a business-critical factor – by implementing a rapid prototyping process.

Our consulting and professional feedback can extend to areas such as

types of plastic
design
function
production setup
quality

Contact us if you are facing a specific challenge or if you want to know more about how we can create value for your company.

More Less

Company data

Sales volume

10-49 Mio US $

Export content

max. 10%

Number of employees

50-99

Foundation

1979