Manufacturers Trader

MicroGroup, Inc.

7 Industrial Park Road , 02053 Medway, MA
USA

Telephone +1 508 533-4925
Fax +1 508 533-5691
info@microgroup.com

This company is co-exhibitor of
MedNet GmbH

Trade fair hall

  • Hall 8a / H14
 Interactive Plan

Hall map

COMPAMED 2016 hall map (Hall 8a): stand H14

Fairground map

COMPAMED 2016 fairground map: Hall 8a

Our range of products

Product categories

  • 01  Components, parts, modules, Original Equipment Manufacturers
  • 01.02  Adaptors
  • 01  Components, parts, modules, Original Equipment Manufacturers
  • 01.17  Endoscope parts

Endoscope parts

  • 01  Components, parts, modules, Original Equipment Manufacturers
  • 01.28  Cannulae
  • 08  Needles
  • 08.06  Needles, specials

Needles, specials

Our products

Product category: Adaptors

Ear, Nose, and Throat

For over 40 years MicroGroup has been manufacturing  components and assemblies for the biggest Medical Device OEM’s. Proprietary manufacturing methods and state of the art equipment allow MicroGroup to lead the pack in component quality, precision, and lead-time. Minimally invasive procedures require leading edge capabilities to manufacture smaller devices. Depending on design and intended function, technologies of Multi-Axis CNC Grinding, CNC Turning, specialized EDM processes and Laser welding are strategically used to provide intended geometry and ultimate performance of single and multiple component assemblies.

Typical ENT components manufactured include:

Irrigation tubes
Endoscopic graspers
Needles and Hubs
Endoscope components
Aspiration tubes
MicroGroup produces the highest quality components and devices to exacting tolerances. Our many years of experience and process improvement have allowed us to perfect the programming and machining of the toughest profiles along with the finest finishes and to give the highest component durability.

More Less

Product category: Adaptors

Oncology

For over 40 years MicroGroup has been manufacturing Biopsy needles and Cutters for the largest Medical Device OEM’s. Proprietary manufacturing methods and state of the art equipment allow MicroGroup to lead the pack in component quality, precision, and lead-time. MicroGroup’s ability to resize and centerless grind tubing allows us to create inner/outer components with tolerances of “tenths of a thousandth of an inch” This capability results in optimum component performance at high RPM and reciprocation rates.

Depending on design and intended function, technologies of Multi-Axis CNC Grinding, CNC Turning, specialized EDM processes and Laser welding are strategically used to provide intended geometry and ultimate performance of single and multiple component assemblies.

Some of our typical Biopsy/ Cutter components include:

Solid trocars
Cannulas
Closed end tubes with side apertures
Hollow point cutters cylindrical ground and custom profile tips
 

MicroGroup produces the highest quality components and devices to exacting tolerances. Our many years of experience and process improvement have allowed us to perfect the programming and machining of the toughest profiles along with the finest finishes and to give the highest component durability.

To complement our machining technology, MicroGroup has a multitude of other capabilities which far exceed our competition. Our vast array of finishing processes can be used to create many different surface textures and finishes.

More Less

Product category: Adaptors

Orthopedics/Sports Medicine

MicroGroup has been manufacturing orthopedic components and devices for the biggest Medical Device OEM’s for over 40 years. Proprietary manufacturing methods and state of the art equipment allow MicroGroup to lead the pack in component quality, precision, and lead-time. Depending on design and intended function, technologies of Multi-Axis CNC Milling, CNC Turning, CNC Grinding and specialized EDM processes are strategically used to provide intended geometry and ultimate performance.

Some of our typical orthopedic components include:

Screws, Hooks, Spacer delivery systems
Drill guides
Suture inserters
External fixation components
Specialty guide wires
Cement delivery systems
MicroGroup can produce the highest quality components and devices to exacting tolerances. Our many years of experience and continuous improvement have allowed us to perfect the programming and machining of the toughest profiles along with the finest finishes and to give the highest component durability.

To complement our machining technology, MicroGroup has a multitude of other capabilities which far exceed our competition. Our vast array of finishing processes can be used to create a variety of surface textures; matt, shiny, smooth, roughened, sharp, and laser marked.

As a one stop shop, MicroGroup can take electronic files and convert them to a CNC program and through our “Rapid Prototyping Program”, produce parts within 15 days.

More Less

Product category: Endoscope parts

Cardiology

MicroGroup has been manufacturing components for Cardiovascular procedures for the largest Medical Device OEM’s for over 40 years. Proprietary manufacturing methods and state of the art equipment allow MicroGroup to lead the pack in component quality, precision, and lead-time. MicroGroup utilizes the latest manufacturing technologies to produce a variety of stent delivery systems, trocars and endoscope components.

Multi-Axis CNC Milling, CNC Turning, CNC Grinding, forming and specialized EDM processes are strategically used to provide intended geometry and ultimate performance. Validated cleaning and passivation processes ensure components consistently meet customer cleanliness specifications.

MicroGroup can produce the highest quality components and devices to exacting tolerances. With many years of experience and continuous improvements we have perfected the programming and machining of the toughest profiles. Along with the finest finishes to give the highest component durability.

To complement our machining technology, MicroGroup has a multitude of other capabilities which far exceed our competition. Our vast array of finishing processes can be used to create a variety of surface textures; matt, shiny, smooth, roughened, sharp, and laser marked.

More Less

Product category: Cannulae

Gastroenterology

For over 40 years MicroGroup has been manufacturing Endoscope components and assemblies for the biggest Medical Device OEM’s. Proprietary manufacturing methods and state of the art equipment allow MicroGroup to lead the pack in component quality, precision, and lead-time. Minimally invasive procedures require leading edge capabilities to manufacture smaller devices.

Depending on design and intended function, technologies of Multi-Axis CNC Grinding, CNC Turning, specialized EDM processes and Laser Welding are strategically used to provide intended geometry and ultimate performance of single and multiple component assemblies.

Typical endoscope components manufactured include:

Biopsy forceps
Endoscopic graspers
Staplers
Endoscopes / Endoscopy snares
Ablation jaws
MicroGroup produces the highest quality components and devices to exacting tolerances. Our many years of experience and process improvement have allowed us to perfect then programming and machining of the toughest profiles along with the finest finishes and to give the highest component durability.

To complement our machining technology, MicroGroup has a multitude of other capabilities which far exceed our competition. Our vast array of finishing processes can be used to create many different surface textures and finishes.

More Less

Product category: Cannulae

Neurology/Spinal

MicroGroup has been manufacturing components used in Neurology procedures for over 20 years. Proprietary manufacturing methods and state of the art equipment allow MicroGroup to lead the pack in component quality, precision, and lead-time. MicroGroup’s ability to resize and center less grind tubing allows us to create inner/outer components with tolerances of “tenths of a thousandth of an inch” This capability results in optimum component performance.

Our extensive knowledge of tubing is demonstrated during the manufacture of cannula, needles and hubs, probes, tips, irrigation tube and passer tubes.

Depending on design and intended function, specialized EDM processes, forming, flaring, bending, grinding and grit blasting are used to provide intended geometry and ultimate performance of single component devices. Complex assemblies are achieved with the use of precision laser welding.

Some of our typical components include:

Solid trocars
Cannulas
Closed end tubes with side apertures
Hollow point cutters cylindrical ground and custom profile tips
Laparoscopic tubes
MicroGroup produces the highest quality components and devices to exacting tolerances. Our many years of experience and process improvement have allowed us to perfect the programming and machining of the toughest profiles along with the finest finishes and to give the highest component durability.

To complement our machining capability, MicroGroup has a multitude of post manufacturing validated cleaning processes .

More Less

Product category: Cannulae

Ophthalmology

MicroGroup has been manufacturing components and devices for the largest Ophthalmic Medical Device OEM’s for over 40 years. Proprietary manufacturing methods and state of the art equipment allow MicroGroup to lead in component quality, precision, and lead-time.

Capabilities such as Multi-Axis CNC Milling, CNC Turning, CNC Grinding, Bending. Laser Welding and specialized EDM processes are strategically used to provide intended geometry and ultimate performance.

Some of our typical orthopedic components include:

Cannulated cutting devices
Micro needle tips
Introducers
MicroGroup can produce the highest quality “micro” components and devices to exacting tolerances. Our many years of experience and continuous improvement have allowed us to perfect the programming and machining of the toughest profiles along with the finest finishes and to give the highest component durability.

To complement our machining technology, MicroGroup has a multitude of other capabilities which far exceed our competition. Ophthalmic components can be attached to shafts, drivers and plates using our state of the art laser weld technology. Our vast array of finishing processes can be used to create, matt, shiny, smooth, roughened, sharp, andlLaser marked surfaces.

More Less

Product category: Needles, specials

Dental

For over 40 years MicroGroup has been manufacturing components for the biggest Medical Device OEM’s. Proprietary manufacturing methods and state of the art equipment allow MicroGroup to lead the pack in component quality, precision, and lead-time. MicroGroup’s ability to resize and centerless grind tubing allows us to create inner/outer components with tolerances of “tenths of a thousandth of an inch”.

Depending on design and intended function, technologies of Multi-Axis CNC Grinding, CNC Turning, specialized EDM processes and Laser Welding are strategically used to provide intended geometry and ultimate performance.

Some of our typical Dental components include:

Scalers
Irrigation Tubes
Cutting instruments
To complement our machining technology, MicroGroup has a multitude of other capabilities which far exceed our competition. Our vast array of finishing processes can be used to create matte, shiny, smooth, roughened, sharp, laser marked, e-polished and passivated surfaces.

As a one stop shop, Microgroup can take your electronic files convert them to a CNC program and through our “Rapid Prototyping Program”, produce parts within 15 days.

More Less

About us

Company details

MicroGroup established in 1971 is well known for their outstanding stainless steel tubing and their precision machined components and assemblies within the medical device sector. From initial concept and prototype fabrication, to qualification and validation, to turnkey production - MicroGroup works most smart and efficiently to satisfy customer needs.
The product range includes standard tubing, bar stock and wire made of stainless steel, titanium and nickel alloys. A broad range of capabilities such as cutting, centerless grinding, redraw to shape and size, straightening and bright annealing enable MicroGroup to easily fulfill any customer request. Precision machined components and assemblies are customized through grinding, bending, cold working, milling, turning, EDM, laser cutting, welding, surface treatment, bright annealing, assembly, cleaning and finishing.

More Less

Company data

Number of employees

100-499

Foundation

1968