Researchers at McGill University in Canada have been able to demonstrate that ultrasound can greatly increase the adhesive strength of hydrogel plasters. Professor Outi Supponen from ETH Zurich explains in the video how this works and how useful it can be for the administration of drugs via the skin.
Brain-computer interfaces are able to restore some mobility to paralyzed people by controlling exoskeletons. However, more complex control signals cannot yet be read from the head surface because conventional sensors are not sensitive enough. A collaboration of Fraunhofer IAF, Charité – Universitätsmedizin Berlin, University of Stuttgart and other industrial partners has taken up this challenge.
The World Health Organization (WHO) ranks antibiotic resistance as one of the top ten threats to global health. A group of researchers at Chalmers University of Technology in Sweden are now presenting a new spray that can kill even antibiotic-resistant bacteria, and that can be used for wound care and directly on implants and other medical devices.
Secondary, uncontrolled bleeding from traumatic injury is the leading cause of death of Americans from ages one to 46. Amir Sheikhi, assistant professor of chemical engineering and of biomedical engineering at Penn State, has a plan to change that with a novel microneedle patch that can immediately stop bleeding after injury.
Novel drugs are based on drug transport using nanoparticles. Whether this drug transport is negatively influenced by an accumulation of blood proteins on the nanoparticle’s surface was not clarified for a long time. Scientists at the Max Planck Institute for Polymer Research have now followed the path of such a particle into a cell using a combination of several microscopy methods.
Age-related macular degeneration (AMD) is a degenerative eye condition. It is the most frequent cause of blindness in humans. In most cases, the chronic progression of the retinal condition is not curable. Fraunhofer researchers have now developed a new method for the production and clinical application of stem-cell-based retinal implants.
Researchers at the Fraunhofer WKI and the Fraunhofer IAP, in collaboration with industrial partners, have achieved initial success in the development of bio-based flame retardants in bioplastics. In the future, it could therefore be possible to utilize plastics in electronics and electrical engineering that consist of 100 percent bio-based materials.
A novel combination of artificial intelligence and production techniques could change the future of nanomedicine, according to Cornell researchers using a new $3 million grant from the National Science Foundation to revolutionize how polymer nanoparticles are manufactured.
Is it COVID or the flu? A diagnosis without having to leave the house, just by looking at your smart home device? So far, no. But researchers at the Norwegian University of Science and Technology (NTNU) have developed a microresonator for the long-wave infrared spectrum that could enable new technologies, particularly for particle detection and spectroscopic chemical identification.
It sounds like trying to scan a vinyl record with a hammer: Light is actually too "coarse" to image small particles on the nanometer scale. However, in their project "Supercol" – funded by the European Union – scientists want to achieve just that: The investigation of nanoparticles with light.
Additive manufacturing of tools using a laser powder bed fusion process offers a great number of advantages. That said, it can be difficult to determine the optimal process parameters. For the first time, researchers at Fraunhofer are now simulating the process at the microstructure level in order to identify direct correlations between the workpiece properties and the selected process parameters.
Within the project INNO4COV-19, the Fraunhofer FEP developed a prototype of a portable thermal camera system with integrated, low-power microdisplays for early and contactless detection of infected persons.
The nanomaterial graphene oxide – which is used in everything from electronics to sensors for biomolecules – can indirectly affect the immune system via the gut microbiome, as shown in a new study on zebrafish by researchers at Karolinska Institutet in Sweden.
The UPV/EHU's Microfluidics Cluster has used a custom-made resin formulation coupled with a high-resolution 3D printing methodology for the rapid optimisation of modular plasma separation devices working with very small sample sizes. The printing method used demonstrates the huge contribution that this microfluidic technology can make towards the market for biomedical plasma separation devices.
Many photochemical processes rely on UV light from inefficient or toxic light sources that the LED technology cannot replace for technical reasons. An international team of scientists has now developed the first molecular system for the conversion of blue light into high-energy UV photons with wavelengths below 315 nanometers.
The researchers of the new Collaborative Research Center (CRC), funded by the German Research Foundation (DFG), intend to apply findings of polymer research to molecular processes in order to better understand what happens in body cells.
Water that simply will not freeze, no matter how cold it gets – a research group involving the Helmholtz-Zentrum Dresden-Rossendorf (HZDR) has discovered a quantum state that could be described in this way.
Producing infection control clothing requires a lot of energy and uses lots of material resources. Fraunhofer researchers have now developed a technology which helps to save materials and energy when producing nonwovens. A digital twin controls key manufacturing process parameters on the basis of mathematical modeling.
Together with industrial partners, the Fraunhofer Institute for Laser Technology ILT has developed a novel system for producing high-resolution microcomponents by photo-crosslinking. Thanks to their work polymer microstructures can now be produced economically and customized in one machine.
Researchers at the UPC’s Department of Electronic Engineering have developed a new type of magnetometer that can be integrated into microelectronic chips and that is fully compatible with the current integrated circuits.
Hearing-impaired people whose auditory nerve is still intact can often be helped with a cochlear implant. But inserting the implant into the inner ear is not without risks, as facial nerves can be damaged in the process. Empa researchers have developed a novel smart drill that minimizes the risk by automatically shutting off when it comes near nerves.
In its most recent study, the research group headed by microsystems engineer Dr. Can Dincer of the Department of Microsystems Engineering, University of Freiburg introduces a microfluidic multiplexed chip for the simultaneous measurement of the viral load in nasal swabs and (if applicable) the blood antibiotic levels of COVID-19 patients.
A cell-culturing technique developed by KAUST scientists helps to create biological conditions that more closely mirror physiological environments compared to standard protocols used in most laboratories today.
When a liquid boils in a vessel, tiny vapor bubbles form at the bottom and rise, transferring heat in the process. How these small bubbles grow and eventually detach was previously not known in any great detail. A German-Chinese research team under the leadership of the Helmholtz-Zentrum Dresden Rossendorf (HZDR) has now managed to fundamentally expand this understanding.
MEDICA 2022 - the world's leading medical trade fair - has once again proven its prominence as the top-drawer trade event for UK life science innovators who are export-ready and looking to grow. This...
We would like to share the exciting news that Endosmart GmbH will be acquired by the Alleima Group. The combined expertise of the Endosmart and Alleima teams will strengthen our capability to support...
Speed Plastics, a specialist in high frequency welding, will once again be at MEDICA 2022 to showcase the range of engineering and OEM services they offer healthcare companies. The engineering company...
Small yet robust enclosures are needed for the integration of miniaturised electronic components, sensors and radio technology. The MINI-DATA-BOX range of plastic enclosures by OKW Gehäusesysteme GmbH...
Medical imaging generates a lot of data, for example during computer tomography. This data important when it comes to personalised medicine. Artificial intelligence methods, such as machine learning,...
Over the last decade, Minimally Invasive Surgery has transcended by several dimensions due to the invention of vessel sealing with cutting, however, the use of disposable vessel sealers with cutters...
Every year, when fall comes along, it is time for Compamed, the international trade fair for medical technology in Düsseldorf, Germany. From November 14–17, KNF will be presenting the latest gas and...
PROACT Medical – a UK-based company specialising in the manufacture and supply of Patient Monitoring, Diagnostic and Airway Medical products – will be joining the ABHI UK Pavilion at MEDICA 2022 (14 –...
As a critical subcontractor in the field of medical devices, Cisteo MEDICAL has chosen from the first years of its creation on to certify its quality management system according to ISO 13485. Today,...