A 'hot' new development for ultracold magnetic sensors -- COMPAMED Trade Fair

A 'hot' new development for ultracold magnetic sensors

Graphic: optical SQUID picture

This image shows an optical micro-picture of a small part of a 484 series SQUID array showing 54 SQUIDs and a high resolution picture showing only 11 SQUIDs; © Boris Chesca/ Loughborough University

Magnetoencephalography, or MEG, is a non-invasive technique for investigating human brain activity for surgical planning or research, and has been used in hospitals and universities for more than 30 years. The most sensitive commercial magnetometers require near absolute zero temperatures, but researchers have now built a device with superior performance at a relatively balmy 77 K.

It's just one of the many powerful technologies made possible by a tiny device called a SQUID, short for superconducting quantum interference device. SQUIDs can detect minuscule magnetic fields, useful in applications ranging from medical imaging of soft tissue to oil prospecting.

The most sensitive commercial magnetic sensors require a single SQUID kept at 4.2 Kelvin - an incredibly chilly temperature that is usually maintained with expensive and difficult to handle liquid helium. Now researchers from Loughborough University and Nottingham University, both in the United Kingdom, have built a multi-SQUID device that can operate at 77 K - the boiling temperature of liquid nitrogen, a much cheaper coolant. The new device still outperforms most standard 4.2 K SQUID magnetometers. The team reports their results this week in the journal Applied Physics Letters.

"We believe there should be an immediate interest in the entire SQUID community for the potential replacement of their existing superconducting magnetic sensors based on single SQUIDs operating at 4.2 K with our SQUID arrays operating at 77 K," said Boris Chesca, a physicist at Loughborough University and first author on the new paper.

Chesca and his colleagues achieved their breakthrough high temperature SQUID performance by taking advantage of strength in numbers. While low temperature SQUIDs are inherently more sensitive, a large array of high temperature SQUIDs could theoretically achieve the same performance as a single low temperature one.

SQUIDs work by converting a measure of magnetic intensity called flux into a voltage. If you string together a series of SQUIDs the voltage output scales in direct proportion to the number of SQUIDs, while the noise in the measurement only increases as a square root of the SQUID count. Therefore, the more SQUIDs you have, the stronger the signal, and the more sensitive the measurement that can be performed.

The catch is that the approach only works if all the SQUIDs experience the same magnetic flux (a condition called flux coherency) and the interaction between each SQUID and its neighbors is minimized -- both tricky conditions to meet because of parasitic fluxes that form during normal SQUID operation. "Flux coherency could never be reached in the previous approaches in large SQUID arrays with more than 30 SQUIDs," Chesca noted.

The key difference in the array that Chesca and his colleagues designed has to do with a feature called a flux focuser. Flux focusers are large areas of superconductor that improve magnetic field sensitivity and minimize parasitic fluxes. In previous SQUID arrays, there were either no flux focusers or the flux focusers were so large that they limited the number of SQUIDs that could be integrated onto a single chip.

Chesca and his colleagues are currently working on optimizing the shape and design of the SQUID arrays to maximize their magnetic field sensitivity. "The most exciting aspect of our result is that replacing single-SQUIDs operating at 4.2 K with SQUID arrays operating at 77K would be, for the first time, not only a cheaper and more user-friendly solution, but a solution that comes with no compromise regarding noise resolution," Chesca said.

COMPAMED-tradefair.com; Source: American Institute of Physics

More about American Institute of Physics at: www.aip.org