27.11.2024
Researchers at the University of Chicago’s Pritzker School of Molecular Engineering have developed a unique hydrogel semiconductor with properties ideal for medical applications. This new material offers seamless integration with tissue, paving the way for advanced bioelectronic devices in implants and non-surgical applications.08.11.2024
The Fraunhofer Institute for Manufacturing Technology and Advanced Materials IFAM has developed alternatives to perfluorinated and polyfluorinated alkyl substances (PFAS) that can also be used in medical technology. PFAS, known as the “poisons of the century”, are difficult to break down and will be banned in the EU in the future.30.10.2024
There are almost 40 million blind people worldwide, with a further 124 million suffering from visual impairment. Researchers have long been looking for ways to at least partially restore sight to make everyday life easier for those affected. With the miniaturization of technology and improved data transmission and evaluation, visual implants are increasingly coming into focus.07.10.2024
Researchers at Kiel University (CAU) have investigated and compared six biomedical coating materials to understand their interactions with cells, skin and viruses.04.10.2024
Researchers at the Fraunhofer Institute for Photonic Microsystems (IPMS) and the Max Planck Institute for Multidisciplinary Natural Sciences (MPI-NAT) are developing OLED-on-CMOS-based optical stimulators for future cochlear implants as part of the “NeurOpto” project. The technology promises more precise optical stimulation for neurosensory therapies.02.10.2024
The Fraunhofer Institute for Applied Polymer Research (IAP) and the Brandenburg University of Technology Cottbus-Senftenberg (BTU) are developing 3D printing inks with the body's own cartilage cells for personalized cartilage implants. The research is intended to create new treatment options for cartilage damage and strengthen the innovative power of Lusatia.16.09.2024
Researchers at ETH Zurich, led by Professor Mehmet Fatih Yanik, have developed ultra-flexible brain probes that measure brain activity precisely and gently. In the long term, these new probes should contribute to the treatment of neurological and psychiatric diseases and advance research into brain processes such as memory storage.10.09.2024
Researchers at EPFL have developed a new miniaturized brain-machine interface (BMI) that enables direct brain-to-text communication on extremely small silicon chips. This technology could offer people with severe motor impairments, such as ALS or spinal cord injuries, improved communication capabilities.09.09.2024
Many medical devices utilize software designed to meet the special requirements of current regulation. The software developer CODIALIST GmbH in Berlin (Germany) supports various customers in the MedTech sector. We spoke to Dr. Dominik Karch about the exciting projects they have conducted and the challenges within this business area.07.08.2024
COMPAMED, the leading international trade fair for the medical technology supplier industry, will take place in Düsseldorf from November 11 to 14, 2024. The COMPAMED Suppliers Forum by Devicemed offers a special opportunity to present your own expertise.22.07.2024
Local drug delivery over a longer period of time: this is one of the challenges that doctors face when treating wounds and inflammations. Empa researchers have now developed a promising solution: “liquid core fibers” that contain drugs inside them and can deliver them precisely over a longer period of time.12.07.2024
Companies around the world are relocating their production to Asia. Although final production often takes place in their own country, many of the components come from countries in Central or South East Asia. In order to remain competitive, the EU has created various instruments to promote innovative ideas and modern technologies from which medical technology suppliers can also benefit.10.07.2024
With the development of the Fraunhofer Dynamic Mixing Technologies (FDmix) platform, the Fraunhofer Institute for Production Systems and Design Technology IPK and FDX Fluid Dynamix GmbH have achieved a milestone in nanoparticle production.02.07.2024
With the development of the Fraunhofer Dynamic Mixing Technologies (FDmix) platform, the Fraunhofer Institute for Production Systems and Design Technology IPK and FDX Fluid Dynamix GmbH have achieved a milestone in nanoparticle production.17.06.2024
The grand opening of the Health Innovation Hub at Switzerland Innovation Park Ost (SIPO) laid an important foundation stone for future innovations in the field of healthcare. The hub serves as a platform for networking experts from research and industry to jointly drive forward innovative projects in the areas of wearables, health monitoring and disease prevention.11.06.2024
There is new hope for patients with narrowed coronary arteries: a self-dissolving stent has been implanted for the second time worldwide at Hannover Medical School (MHH). This innovative stent, which dissolves over time once it has done its job, promises considerable advantages over conventional vascular stents, especially for younger patients.10.06.2024
They monitor, transmit and control – sensors in medical technology. Hardly any device can do without them. For most people, their health at some point in their lives will depend on whether sensors are doing their job properly. But how diverse are their applications in medical devices?10.06.2024
Discover the dimensions of 3D printing in our latest video, which shows the possibilities of current printer models and highlights the diverse areas of application in the field of medical technology. Whether dentistry or orthopaedics, 3D printers can be used in a wide range of applications and the medical technology sector would be unthinkable without them.10.06.2024
Researchers at the Fraunhofer Institute for Physical Measurement Techniques (IPM) have now developed an innovative sensor that measures the oxygen content directly in the breath and thus provides precise and continuous values.27.05.2024
Within medical technology, AI programs are swiftly being implemented - from relieving doctors of work to detecting cancerous tumors at an early stage. AI is also playing an increasingly important role for medical technology suppliers. It can control, monitor and optimize manufacturing processes for components and materials.14.05.2024
The innovative magnetic field sensor from Q.ANT, a German quantum technology company, opens up far-reaching possibilities for prosthesis control and sensor technology in medical technology and beyond.08.05.2024
An innovative 3D printing process is breaking down traditional manufacturing boundaries and opening up unimagined possibilities from aerospace to medical technology: laser powder bed fusion (LPBF). In our interview, Tim Lantzsch from the Fraunhofer Institute for Laser Technology ILT explains current applications of this promising additive manufacturing technology.08.05.2024
The trend towards sustainable products and materials is also finding its way into medical technology. With the new GreenLine product range, Ottobock, one of the leading providers of medical technology solutions, offers prosthetists and orthotists and their patients innovative solutions that combine the need for more ecological materials with consistent functionality.06.05.2024
Researchers at the Leibniz Institute for Plasma Science and Technology (INP) have developed a plasma printing technology that enables the precise modification of surfaces on an extremely small scale.24.04.2024
Researchers at Empa in Switzerland have developed a new type of material that combines several pioneering properties: the cellulose aerogel is biodegradable, can be printed in three dimensions and also offers excellent thermal insulation.15.04.2024
Researchers at Northwestern University (USA) have developed an implant that monitors bladder fullness in real time. The battery-free, flexible device is attached to the bladder wall and transmits the data to a smartphone app.12.04.2024
The start-up goatAM wants to commercialize 3D printing technology for pharmaceuticals. goatAM CEO Tilmann Spitz and Dr. Julian Quodbach from Utrecht University explain the advantages of the process, why the individual dosing of drugs in 3D printing makes sense and how the properties of the polymers influence the release of the drugs.02.04.2024
Researchers at the Fraunhofer Institute for Applied Polymer Research together with the Fraunhofer Institute for Interfacial Engineering and Biotechnology (IGB) and the Fraunhofer USA Center for Manufacturing Innovation have developed a tissue adhesive based on the model of the mussel. The printable dopamine-based tissue adhesive can even be printed on curved, uneven surfaces.21.03.2024
Yonglong Xie, Rice University physics assistant professor, receives the NSF CAREER Award, a $888,555 grant, fueling his research on magnons, quantum entities in magnetic materials, to revolutionize quantum technology. Xie's work shapes future quantum devices and sensors.18.03.2024
Researchers at Universitat Politècnica de Catalunya - BarcelonaTech (UPC) have developed a thermosensitive hydrogel with multifaceted applications, including seawater desalination using solar energy and the creation of advanced biomedical adhesives for semi-invasive therapies and medical diagnostics.11.03.2024
Many medical devices utilize software designed to meet the special requirements of current regulation. The software developer CODIALIST GmbH in Berlin (Germany) supports various customers in the MedTech sector. We spoke to Dr. Dominik Karch about the exciting projects they have conducted and the challenges within this business area.29.02.2024
Plasma scientists at the U.S. Department of Energy’s Princeton Plasma Physics Laboratory (PPPL) have made advancements in microchip manufacturing. Their latest research, highlighted in a recent peer-reviewed publication, aims to enhance production efficiency and streamline manufacturing processes. This development holds the potential to revitalize the American chip industry.15.02.2024
In the pursuit of enhancing clinical diagnostics, researchers at the Indian Institute of Technology Indore have unveiled a new tool—a compact and cost-effective photoacoustic (PA) sensing instrument designed for biomedical tissue diagnosis. This development improves diagnostic practices, patient care and outcomes, offering rapid and accurate insights into breast tissue characterization.31.01.2024
Researchers from Brigham and Women's Hospital and the Massachusetts Institute of Technology (MIT) have developed a groundbreaking microscopy technology known as decrowding expansion pathology (dExPath). This innovative method allows for the visualization of previously unseen details in human brain tissue, opening new avenues for the diagnosis and treatment of brain cancer.31.01.2024
The price of a drug is not only dependent on the raw materials used, but is also determined by the manufacturing process. High prices are charged for some cancer drugs in particular, as they can only be produced in small quantities at great expense. Keyword: mRNA therapeutics.14.12.2023
From conversations with friends or colleagues to plays and lectures – modern hearing devices enable many people to participate in everyday life. However, the smallest components are needed to ensure that the devices function optimally and cause as few complications as possible for the users. Let’s take a look at the microtechnology in these hearing aid devices.14.12.2023
A better understanding of muscle activity patterns in the forearm supports a more intuitive and natural control of artificial limbs. This requires a network of 128 sensors and artificial intelligence based techniques.12.12.2023
A single strand of fiber developed at Washington State University has the flexibility of cotton and the electric conductivity of a polymer, called polyaniline. The newly developed material showed good potential for wearable e-textiles.07.12.2023
Researchers at the Fraunhofer IAP have been working alongside the Fraunhofer IGB and the Fraunhofer CMI to develop a tissue adhesive that can help avoid early replacement of prostheses in the future.06.12.2023
PFAS filters available for industrial waste are usually made of activated carbon (PFAS = perfluorinated and polyfluorinated alkyl compounds). As this is comparatively expensive, researchers are looking for alternative filter materials for the so-called "eternal toxins", whose hazardous residues only degrade very slowly in the environment.30.11.2023
Prof Dr Klaus Kümmerer from Leuphana University Lüneburg and his colleague Prof Dr Hans-Josef Endres from Leibniz University Hanover want to develop a sustainable recycling model for the plastics industry.28.11.2023
Professor Pavel Jungwirth and his colleagues from the Institute of Organic Chemistry and Biochemistry of the Czech Academy of Sciences and the cochlear implant company MED-EL, based in Austria, have come up with a complete computer model of the ear. It can be used to simulate hearing of mammals including humans from the outer ear all the way to the auditory nerve.28.11.2023
After a bone fracture, some patients experience healing disorders. To enable effective treatment in these cases, the Fraunhofer Institute IFAM (Germany) is researching a new composite material for use in the operating theater as part of the SCABAEGO joint project.22.11.2023
Researchers from Göttingen and Karlsruhe have developed a new treatment approach for pancreatic cancer. The innovative method promises to be able to treat the disease in a more targeted way and with fewer side effects in the future. The therapy is now to be optimized for clinical application as quickly as possible.13.11.2023
At COMPAMED 2023, Aurimas Vrubliauskas from WOP/Workshop of Photonics shows us FemtoGLASS, a new device for laser cutting technology, in the video. It can be used to process glass and sapphire - perfect for research and production, from microfluidics to micro-optics.31.10.2023
Despite highly specialized methods that can simultaneously produce a range of materials on a single sample and then measure them automatically, every minute counts when analyzing them: because days or even weeks can pass before the characterization of a sample is complete. The new algorithm can be integrated into existing measuring instruments to boost their efficiency significantly.25.10.2023
In order to produce thin organic semiconductor films automatically and with well-defined properties, researchers – led by Leibniz IPHT in Jena, Germany – have developed a new technological approach for depositing thin films with high molecular precision.18.10.2023
Scientists from the University of Stuttgart, the University of Tübingen, the Max Planck Institute for Intelligent Systems and the Max Planck Institute for Biological Cybernetics are conducting research on intelligent bionic systems that will aid understanding and treatment of certain diseases of the central nervous system.17.10.2023
Producing new plastic by advanced recycling of post-use plastic (PUP), instead of fossil-based production, can reduce greenhouse gas emissions (GHG) and increase the U.S. recycling rate, according to research by the U.S. Department of Energy’s (DOE) Argonne National Laboratory.12.10.2023
Researchers at Fraunhofer are working as part of an EU research project to improve control of prosthetic hands down to individual fingers.04.10.2023
Researchers at the Fraunhofer Institute for Digital Media Technology IDMT in Oldenburg have developed a new method for collecting and analyzing vital signs from the human body by using radar.03.10.2023
Continuous monitoring of sweat can reveal valuable information about human health, such as the body’s glucose levels. However, wearable sensors previously developed for this purpose have been lacking, unable to withstand the rigors or achieve the specificity needed for continuous monitoring. Now, the research team has created a novel wearable patch that may be up to the task.28.09.2023
Trends such as Industry 4.0 and the Internet of Things are making the precise recording of the condition of machines and components increasingly important. To face the challenges in collecting sufficient data, the Fraunhofer Institute for Laser Technology ILT has developed a sensor infrastructure for smart industrial applications and implemented it using additive manufacturing processes.27.09.2023
BioMagnetix uses bacterial magnetic nanoparticles as innovative materials for biomedical applications. The founding team aims to develop and continuously improve high-quality and highly functional magnetic nanoparticles for imaging techniques and therapeutic purposes, such as cancer treatment.21.09.2023
The Fraunhofer Institute for Production Technology IPT in Aachen has expanded its machinery with a new system for the automated molding of high-precision optical glass components.20.09.2023
Scientists from the Chair of Materials Science and Nanotechnology at TU Dresden (TUD) have made considerable progress in the development of highly innovative solutions for the detection of viral pathogens in two studies they presented recently.19.09.2023
MIT researchers developed a generative-AI-driven tool that enables the user to add custom design elements to 3D models without compromising the functionality of the fabricated objects. A designer could utilize this tool, called Style2Fab, to personalize 3D models of objects using only natural language prompts to describe their desired design.14.09.2023
Researchers have invented a nano-thin superbug-slaying material that could one day be integrated into wound dressings and implants to prevent or heal bacterial infections.13.09.2023
The BMBF-funded project “Forschungslabore Mikroelektronik Deutschland (ForLab)” brings together 14 German universities active in microelectronics research. Through the ForLab project, they were able to invest in new facilities that will open up new areas of research.07.09.2023
A research team from the Department of Materials Science at Kiel University (CAU) has now developed a new material based on a hydrogel that functions similarly to a muscle. The soft material can be reduced and enlarged in a controlled manner within a short time and could thus take on motion tasks in soft robotics, for example.06.09.2023
In our everyday life, the desire to use sustainable products instead of those made of plastic is common and can usually be implemented well. But what about medical technology manufacturers? Could they do without plastics at all in order to become more sustainable? After all, they often use a lot of electronics.05.09.2023
Linnaeus University is partnering with industry and healthcare to develop advanced biosensors, investing SEK 35 million in a project aimed at faster and cost-effective diagnoses of aggressive lung cancer, viral, and bacterial diseases, potentially enabling self-testing at home.29.08.2023
They are secretly reading sensitive patient data or remotely switching off devices in intensive care units: while companies and private individuals are now well aware of software Trojans - never download an app or program without checking it - many companies or hospitals face a completely different threat. Namely, that the Trojans come into the house on the backs of the hardware.24.08.2023
Scientists from NTU Singapore have developed a flexible battery as thin as a human cornea, which stores electricity when it is immersed in saline solution, and which could one day power smart contact lenses.23.08.2023
SPIDER project: Using spinwave technology, EU consortium led by Fraunhofer IZM aims to cut computer chip power consumption by 100x. Magnon-based approach promises energy-efficient computing. Project runs till May 2026 with €3M funding.22.08.2023
NUS researchers have developed 'eAir', an innovative pressure sensor inspired by the lotus leaf effect. This sensor could revolutionize minimally invasive surgeries by providing tactile feedback to surgeons and improve patient experiences in monitoring intracranial pressure. Its unique design enhances precision and reliability, potentially transforming various medical applications.17.08.2023
Researchers at the University of Bayreuth, together with partners in China and the USA, have produced an oxide glass with unprecedented toughness.15.08.2023
Scientists at the University of Chicago found a glass crystal just a few atoms thick can trap and carry light - and could be used for applications.10.08.2023
Yale researchers and CytoAstra develop cytophone, a laser-ultrasound platform for noninvasive malaria detection. Funding from Gates Foundation supports prototype development and testing in Burkina Faso. Improved sensitivity offers promising diagnosis and treatment potential, bypassing emerging antigen test challenges.09.08.2023
JAIST researchers create liquid metal nanoparticles (PEG-IMIQ-LM) for cancer treatment, merging photothermal therapy and immunotherapy. Disintegration delivers immunomodulants and tracks cancer cells in real-time. Immune checkpoint inhibitor enhances cancer removal. Promising for future cancer theranostics, with clinical trials anticipated in a decade.08.08.2023
Researchers are developing neuromorphic materials to optimize adaptive algorithms for autonomous driving and more. These materials resemble brain structure, enabling faster and more efficient algorithm responses. Supported by Volkswagen Foundation with €1 million, the team aims to apply the approach to hardware.03.08.2023
Physicists at the University of Würzburg have succeeded in making a new imaging technique ready for use on humans. Radioactive markers and radiation are not necessary for this.28.07.2023
In the NeuroQ project, a consortium from research and industry wants to develop sensitive sensors that enable better control of neural exoskeletons and prostheses under everyday conditions. Dr. Jan Jeske from the Fraunhofer Institute for Applied Solid State Physics IAF told us what role artificial diamonds play in this.27.07.2023
The team of Prof. Dr. Thomas Scheibel, Chair of Biomaterials at the University of Bayreuth, has compiled a current overview of the state of research on protein-based bioadhesives.26.07.2023
Developing technology to quickly and efficiently bioprint human tissues at scale is the goal of a new project led by Penn State researchers. When fully developed, the technology will be the first to enable the fabrication of scalable, native tissues such as bones, tracheas and organs.25.07.2023
Prof. Dr. Christopher Kuenneth together with research partners in Atlanta, USA, have now developed a digital system that promises extraordinarily high economical, technological and ecological benefits: from around 100 million theoretically possible polymers, their system can precisely select those materials that have an ideal property profile for targeted applications at unprecedented speed.20.07.2023
Autonomously switchable polymer materials have recently been developed by materials scientists at the University of Stuttgart and pharmacists at the University of Tübingen.18.07.2023
Specific nerves may be stimulated artificially, for example to treat pain. The finer the nerves, the more difficult it is to attach the required electrodes. Researchers have now developed flexible electrodes produced with 4D printing technology. On contact with moisture, they automatically fold and wrap themselves around thin nerves.13.07.2023
KIMM develops the world’s first 3D bioprinting technology that enhances the function of NK immune cells. The new technology is expected to improve effectiveness of cancer treatment.12.07.2023
Scientists are looking at ways to surveil indoor environments in real time for viruses. By combining recent advances in aerosol sampling technology and an ultrasensitive biosensing technique, researchers at Washington University in St. Louis have created a real-time monitor that can detect any of the SARS-CoV-2 virus variants in a room in about 5 minutes.11.07.2023
Nanometer-scale coatings with functional materials play an important role in many sensory, electronic and photonic applications. An international team of researchers – coordinated by Leibniz IPHT in Jena, Germany – has succeeded for the first time in observing novel growth effects of tin coatings on silicon nanometer-structured surfaces.06.07.2023
Researchers develop and test highly efficient, environmentally friendly and stable antimicrobial (antibacterial, antiviral, antifungal) coating technologies in the NOVA project.04.07.2023
Living organisms use powerful physical principles to control interactions at their surfaces. Researchers at the Leibniz Institute of Polymer Research Dresden, Leipzig University and TU Dresden have now discovered why cholesterol-containing surfaces can exhibit greatly reduced attachment of proteins and bacteria.29.06.2023
A patch equipped with highly sensitive electronics is meant to collect and evaluate vital data. In addition, the sensors will be integrated into baby clothing in order to improve the future of medical monitoring for newborns with the highest level of data security.28.06.2023
In the United States, sickle cell disease affects about 100,000 people and about 2 million Americans carry this genetic mutation. The most common and serious problems caused by sickle cell disease are anemia, pain and organ failure – stroke affects about 10 out of 100 children who have this disease. The national median life expectancy for people who have sickle cell disease can reach up to age 50.27.06.2023
Microscopic imaging of magnetic fields, enabled by quantum sensing, allows the measurement of the unique magnetic fingerprint of objects. This opens the door for fundamentally new applications in various fields such as materials testing or biomedicine. The system offers a unique compromise of sensitivity, resolution and speed.22.06.2023
Researchers from Empa and ETH Zurich have developed a plaster with a sensor function to ensure that wounds in the abdomen remain tightly closed after an operation.20.06.2023
The potential of micro scanners in medical technology is immense. Their small size, low weight and high energy efficiency make them ideal for mobile use. More than 200 different micro scanner designs have been developed at Fraunhofer IPMS to meet customer-specific requirements.15.06.2023
A team of researchers at the Max Planck Institute of Colloids and Interfaces (MPICI) has developed a method that could make it more difficult to counterfeit products in the future. The new and patented method makes it possible to produce unique, non-copyable fluorescent patterns quickly, environmentally friendly and at low costs.13.06.2023
For Qun Ren, every minute counts. The Empa researcher and her team are currently developing a diagnostic procedure that can detect life-threatening blood poisoning caused by staphylococcus bacteria rapidly.12.06.2023
Controlling a machine by giving specific spoken commands? Fraunhofer speech recognition software makes it possible.08.06.2023
A breakthrough in fluorescence microscopy has been achieved by the research group of Ralf Jungmann at the Max Planck Institute of Biochemistry (MPIB) and Ludwig-Maximilians-Universität (LMU) Munich.06.06.2023
Billions of tons of electronic waste are produced in the EU every year. With a novel approach, the new EU project "CircEl-Paper" could sustainably improve the recycling process for electronics in the future.01.06.2023
Using a newly developed method for the efficient and cost-effective production of biocompatible microfibres, the production of autologous skin and organs can be significantly accelerated.25.05.2023
An international research team led by the german University of Jena has now developed a promising approach to significantly reducing blood clotting on the heart valve material titanium.23.05.2023
Imagine a scenario where you simply just throw in a pill to identify an error—this is now one step closer to reality thanks to the work done by researchers at Fraunhofer IZM in cooperation with Micro Systems Technologies (MST) and Sensry GmbH. As small as a piece of candy, the waterproof IoT sensor can reliably measure the properties of liquids even in hard-to-reach places.18.05.2023
The project partners in the BMBF's SEMECO future cluster are convinced that the future of medical technology lies in the combination of digital innovation, safety and improved approval processes.17.05.2023
The Wake Forest Institute for Regenerative Medicine (WFIRM) will make history this month when the first bioprinted solid tissue constructs soar to the International Space Station (ISS) on board the next all private astronaut mission by commercial space leader Axiom Space.16.05.2023
People spend an average of 22 hours a day indoors, where furniture, carpets or wall paints can release harmful solvents over time. The scientists in the international doctoral programme "SENNET" aim to detect such pollutants. They want to develop reliable sensors based on special, porous materials.11.05.2023
Materials made of spider silk can be specifically modified or processed in such a way that living cells of a certain type adhere to them, grow and proliferate. This has been discovered by researchers at the University of Bayreuth under the direction of Prof. Dr. Thomas Scheibel.09.05.2023
The smart skin developed by Anna Maria Coclite has many potential applications – from robotics and cosmetic surgery to prosthetics. With an ERC Proof of Concept Grant, the researcher is now exploring its possible practical applications.04.05.2023
How to further improve the special magnetic properties of nanoparticles by microstructure design has been investigated by a team at TU Bergakademie Freiberg using analytical high-resolution transmission electron microscopy.03.05.2023
The digital world is booming and has long since become part of everyday life in industry and society. More recent developments such as autonomous driving, telemedicine, but also private use require ever higher rates to transmit large amounts of data in real time. 6G should help with this: The aim is to transmit 1,000 GB/s and reduce latency to a tenth compared to 5G.27.04.2023
In the SmartID project, scientists at Fraunhofer are developing a counterfeit-proof barcode system for authenticity verification simply by using a smartphone without accessing a database.25.04.2023
Clinically effective, custom-made, discreet and comfortable - the demands on aligners for the therapy of malocclusions are high. This also applies to the material of these orthodontic splints. A team has now developed a highly innovative material that enables completely new treatment concepts and reduces costs. The scientists focused on polymers with shape memory properties.20.04.2023
Novel microelectrode array system enables long-term cultivation and electrophysiological analyses of brain organoids.19.04.2023
In radiotherapy, precision in targeting tumor tissue while minimizing damage to healthy tissue is crucial. Monitoring the dose of radiation delivered and absorbed in real-time, particularly in the gastrointestinal tract, poses significant difficulty.18.04.2023
How can battery metals such as lithium, cobalt, copper, manganese and nickel be recycled in a sustainable way? This question is in the focus of the new EU project METALLICO, in which DECHEMA is also involved. 23 partners from nine countries will optimize five innovative processes for the recovery of those metals and subsequently demonstrate these in case studies on an industrially relevant scale.11.04.2023
Advanced materials become increasingly complex due to the high requirements they have to fulfill regarding sustainability and applicability. Dierk Raabe and colleagues reviewed the use of artificial intelligence in materials science and the untapped spaces it opens if combined with physics-based simulations.06.04.2023
Through ReWIRE, next-generation scientists will be trained to develop translational breakthrough therapeutic solutions for patients with paralysis caused by traumatic spinal cord injuries.06.04.2023
It assists many physicians and is designed to make their lives easier: Artificial intelligence (AI) has seen an increased use and widespread adoption in healthcare settings. As such, it helps analyze X-ray and CT images or supports chronic disease management, for example. But how trustworthy is AI software?04.04.2023
Neuroscientists at the University of Zurich have developed innovative objectives for light microscopy by using mirrors to produce images. Their design finds correspondence in mirror telescopes used in astronomy on the one hand and the eyes of scallops on the other.28.03.2023
Scientists at the Max Planck Institute for Intelligent Systems, at Johannes Kepler University and at University of Colorado Boulder developed fully biodegradable, high-performance artificial muscles. Their research project marks another step towards green technology becoming a lasting trend in the field of soft robotics.22.03.2023
A research group led by Prof. YAN Xuehai from the Institute of Process Engineering (IPE) of the Chinese Academy of Sciences has developed a family of eco-friendly glass of biological origin fabricated from biologically derived amino acids or peptides.22.03.2023
The COVID-19 pandemic has set off a boom in point-of-care diagnostics. But where is diagnostic testing headed and how much will digital technologies come into play? Felix Kurth answered these and other questions in an interview. The biosystems engineer works at CSEM – a Swiss technology innovation center.21.03.2023
mRNA-based vaccines have been one of the key elements in the fight against the coronavirus. The technology was originally developed for cancer therapy and can be used to treat many diseases. Together with partners, Fraunhofer IPK is now researching how mRNA therapeutics and other medication can be better produced and more effectively applied.16.03.2023
In its various disciplines and manifestations, design is increasingly gaining importance in Fraunhofer's research. Supporting this trend, the three Fraunhofer Institutes IVI, IWS and IWU in Dresden, together with Technische Universität Dresden, are establishing the "DesignLab for Applied Research" on behalf of the research community.14.03.2023
The DITF have developed a sustainable and cost-saving process to produce carbon fibers from lignin. This is an inexpensive raw material that is available in large quantities and is a waste product in paper production. The process offers high energy-saving potential and is particularly environmentally friendly. It uses natural, renewable raw materials and does not require solvents.08.03.2023
Synthetic hydrogels were shown to provide an effective scaffold for neuronal tissue growth in areas of brain damage, providing a possible approach for brain tissue reconstruction.07.03.2023
With the onset of an aging population, the annual incidence of neurodegenerative conditions such as Parkinson's disease is escalating rapidly. One of the various therapeutic approaches for such diseases is deep brain stimulation. Recently, a research team at POSTECH developed a new technique for administering electrical stimulation to the brain without the need for implanted electrodes.01.03.2023
Cancer is the second leading cause of death and the most feared disease in aging Western societies, representing the greatest challenge to modern medicine. Since cancer cannot be prevented, early and differentiated detection is extremely important for rapid intervention and cure.23.02.2023
Having safe drinking water is vital for public health, but traditional methods of disinfection cause their own environmental problems. Chlorine is cheap and easy to use in centralized water systems, but at the expense of harmful chemical byproducts.22.02.2023
Engineering novel molecules and materials with specific properties can yield significant advances for industrial processes, drug discovery and optoelectronics. However, the search for novel molecules and materials is comparable to looking for a needle in a haystack, since the number of molecules in chemical space is of the unimaginable order of 10 to the power of 60.15.02.2023
Scientists from the Micro, Nano and Molecular Systems Lab at the Max Planck Institute for Medical Research and the Institute for Molecular Systems Engineering and Advanced Materials at Heidelberg University have created a new technology to assemble matter in 3D. Their concept uses multiple acoustic holograms to generate pressure fields.14.02.2023
The plastic materials polyurethane and polyvinyl alcohol can now be degraded under mild conditions with the help of enzymes as biocatalysts. Scientists from the University of Greifswald have developed corresponding methods together with the German company Covestro and teams from Leipzig and Dublin, as recently published in Angew. Chem. Int. Ed., in two separate articles.09.02.2023
Instrumenting integrative actuators and sensors within a single active device at the microscale is constrained by current manufacturing technologies. Now, a team of researchers has developed a flexible polymer-based actuatable fiber which is capable of being integrated with smart materials and biosensing composite materials.08.02.2023
Fraunhofer researchers have succeeded in using the bioresorbable silica gel Renacer® to produce an electrospun membrane that is neither cytotoxic to cells nor genotoxic. This model mimics fibrous structures found in connective tissue and is therefore particularly suitable for regenerative applications, such as for improved wound healing.06.02.2023
In a joint research project that ended at the end of 2021, the Fraunhofer Institute for Microstructure of Materials and Systems, the Martin Luther University Halle-Wittenberg, and Skinomics GmbH examined whether a structural protein is suitable as a wound dressing material.06.02.2023
Is the wound healing or is it infected? Physicians must change the bandage to find out because wounds are covered with non-transparent dressings. What happens under the wound dressing is a “black box”. Armin Haas and Professor Kai-Uwe Zirk want to change that. COMPAMED.de asked them about their approach.01.02.2023
Brain-computer interfaces are able to restore some mobility to paralyzed people by controlling exoskeletons. However, more complex control signals cannot yet be read from the head surface because conventional sensors are not sensitive enough. A collaboration of Fraunhofer IAF, Charité – Universitätsmedizin Berlin, University of Stuttgart and other industrial partners has taken up this challenge.31.01.2023
The World Health Organization (WHO) ranks antibiotic resistance as one of the top ten threats to global health. A group of researchers at Chalmers University of Technology in Sweden are now presenting a new spray that can kill even antibiotic-resistant bacteria, and that can be used for wound care and directly on implants and other medical devices.26.01.2023
Secondary, uncontrolled bleeding from traumatic injury is the leading cause of death of Americans from ages one to 46. Amir Sheikhi, assistant professor of chemical engineering and of biomedical engineering at Penn State, has a plan to change that with a novel microneedle patch that can immediately stop bleeding after injury.