A.R.C. Laser GmbH of Nürnberg at MEDICA 2017 in Düsseldorf -- COMPAMED Trade Fair
Manufacturers OEM

A.R.C. Laser GmbH

Bessemerstr. 14, 90411 Nürnberg
Germany

Telephone +49 911 21779-0
Fax +49 911 21779-99
info@arclaser.de

Hall map

MEDICA 2017 hall map (Hall 10): stand F20

Fairground map

MEDICA 2017 fairground map: Hall 10

Our range of products

Product categories

  • 01  Electromedical equipment / Medical Technology
  • 01.03  Therapie and physical medicine
  • 01.03.08  Laser therapy equipment

Laser therapy equipment

  • 01  Electromedical equipment / Medical Technology
  • 01.08  Surgery and Endoscopy
  • 01.08.02  Surgical instruments and products

Surgical instruments and products

  • 01  Electromedical equipment / Medical Technology
  • 01.08  Surgery and Endoscopy
  • 01.08.02  Surgical instruments and products
  • 01.08.02.21  Instruments for hand and plastic surgery

Instruments for hand and plastic surgery

  • 01  Electromedical equipment / Medical Technology
  • 01.08  Surgery and Endoscopy
  • 01.08.02  Surgical instruments and products
  • 01.08.02.24  Instruments for pharynx, larynx and trachea

Instruments for pharynx, larynx and trachea

  • 01  Electromedical equipment / Medical Technology
  • 01.08  Surgery and Endoscopy
  • 01.08.06  Laser surgery equipment

Laser surgery equipment

  • 01  Electromedical equipment / Medical Technology
  • 01.08  Surgery and Endoscopy
  • 01.08.06  Laser surgery equipment
  • 01.08.06.01  Lasers
  • 01  Electromedical equipment / Medical Technology
  • 01.08  Surgery and Endoscopy
  • 01.08.06  Laser surgery equipment
  • 01.08.06.02  Accessories for laser surgery and therapy

Accessories for laser surgery and therapy

  • 01  Electromedical equipment / Medical Technology
  • 01.08  Surgery and Endoscopy
  • 01.08.06  Laser surgery equipment
  • 01.08.06.04  Lasers for eye surgery

Lasers for eye surgery

Our products

Product category: Lasers for eye surgery

Cetus

Cataract surgery with the Nano Laser
  • 100 % Photofragmentation
  • 100 % no ultrasound
  • 100 % single use handpieces
  • Your most affordable choice to enter the prestigious PREMIUM laser segment.
Cataract surgery becomes 100 % laser surgery with the CETUS.

Nano-Laser Surgery means PREMIUM
  • Do you offer premium lenses within your portfolio?
  • Do you want to offer a premium service with a laser option?
  • Do you want to avoid the expensive and time consuming effort with femto laser assisted cataract surgery?
  • The Nano-Laser can be operated with a femto laser to do the rhexis, or without the expensive femto laser. In either case, you benefit by performing full laser cataract surgery. 

Easy OR Integration
The A.R.C. Nano-Laser is very compact which means that it only needs a fraction of a Femto's space.

  • The Nano-Laser is easily adapted to your Phaco Ultrasonic system by simply plugging in the cutters tubing.
  • Inexpensive single-use handpieces eliminate the need for cleaning, sterilization and tuning of the phaco handpiece.
  • Complete single-use-sets are available.
  • The Nano-Laser is maintenance free.
Upgrade your Phaco with a laser system as easy as 1-2-3

Nano-Laser ist gentle, safe and easy to use
  • Ultrasound energy has been implicated in the pathogenesis of endothelial cell loss.
  • This manual laser treatment creates no thermal gradient.
  • The laser avoids mechanical side effects caused by the oscillating phaco tip – minimum risk for a capsular rupture.
  • Eliminates the risk of cross contamination - Single-use handpieces guarantee highest sterility.
  • LOCS P- and -C criterias can be fulfilled.
No more expensive handpieces.
No more cross contamination.
No more need for a Femto.

Lasers attract patients
With the introduction of Lasik, laser became the number one tool in ophthalmology and patient satisfaction.

  • Patients have never been so highly attracted by any other means of surgery.
  • Patients demand laser surgery - especially in ophthalmology.
  • Lasers are advanced technology and contribute to a high value image of your practice.
  • There is no other treatment with the appeal of laser based surgery.
  • It’s only a small step for you to get started with PREMIUM laser surgery.
The A.R.C. Nano-Laser emulsifies the cataract with pulses that are gentle and effective.

  • No moving parts,
  • no temperature gradient
  • and Cataract-Laser-Surgery is yours upon request.
  • Inexpensive, single-use, lightweight laser handpieces eliminate the need for cleaning, sterilization and tuning of the heavy phaco handpiece.

More Less

Product category: Laser therapy equipment, Lasers, Accessories for laser surgery and therapy

C-LAS

Laser for surgery
Treatments with a CO2 laser are characterized by a very successful healing process – there remain often no scars after treatments on the surface. By wrinkle removal, skin resurfacing and streamlining takes place.

Less pain and fast cure with the C-Las
This carbon dioxide laser is an approved tool for an extremely fine cutting and removal of the histoid. The CO2 laser is securely established in all the specialist disciplines since many years. It is very welcome by many doctors in hospitals as well as in many outpatient clinics thanks to its reliability and versatility.
C-Las is flexible

Fast regeneration
High flexibility – simple in use and more possibilities with the Waveguide system. The output power of up to 25 watt and a big range of motion are the features of the CO2 fiber.
C-Las is an allrounder

Micromanipulator
The Micromanipulator can be adapted to almost all the microscopes of your choice.
C-Las is innovative

More Less

Product category: Surgical instruments and products, Lasers

WOLF TruBlue

TruBlue unites the benefits of CO2- and KTP-lasers
The growing demand for non-contact surgery procedures causing less necrosis drove development towards this new surgery system which provides a much higher flexibility than a CO2-laser.

TruBlue is our smallest "CO2 + KTP"-like laser unit for coagulation, vaporization and bloodless surgery. It incorporates the unique benefit of a razor-sharp scalpel inside an extremely flexible glass fiber.

Join the TruBlue revolution!

Truly non-contact cutting
Just like a CO2: Due to its very high absorption in hemoglobin and the high scattering effect the WOLF TruBlue allows you to cut in non-contact-mode with simultaneous coagulation.

Truly flexible
Various fibers with 300, 400, oder 600 μm as well as the progress in glass fiber technology make the TruBlue highly flexible. The laser beam delivered through those flexible fibers allows perfect endoscopic surgeries.

Truly efficient
The 10 W power of the TruBlue is as efficient as 40 W of a CO2-laser and can cut like CO2 in non-contact mode.

Truly silent
Compared to its predecessors, WOLF TruBlue is significantly quieter and smaller because of its reduced cooling requirements.

Truly photoangiolytic
Due to its very high absorption in hemoglobin the WOLF TruBlue has coagulation characteristics no other wavelength can achieve.

Truly lightweight
The WOLF is the perfect portable and lightweight tabletop laser companion for your practice or operation theatre.

Think big, act everywhere
The small dimensions of the WOLF TruBlue ease your everyday routine.

No matter if you need the WOLF TruBlue in the outpatient department or in the operation theatre - just put it in the transport case and take it wherever you want.

More Less

Product category: Laser therapy equipment, Instruments for pharynx, larynx and trachea, Lasers

CHIROLAS

Chirolas finds its use in...

Aesthetics - Vascular Treatments
Dermatology - Lipolysis
Surgery - Vaporisation
Dental - Surgery
ENT - Resection
Veterinary - Surgeries

More Less

Product category: Laser therapy equipment, Instruments for pharynx, larynx and trachea, Lasers, Accessories for laser surgery and therapy

NUVOLAS KTP-Laser

Reproductable results
The NUVOLAS offers the whole 8 Watt output power at laser end. This powerful KTP laser guarantees more power than even needed to run the most diverse treatments. NUVOLAS is one of the most powerful lasers for medical applications.

More power  - more possibilities
 
Wide application spectrum
The green laser can be applied in different medical fields.
NUVOLAS means green

A unique technical standard
  • 8 Watt output power at laser end
  • Weight of only 23 kg
  • Removable display control
  • Easy usage
  • Different adjustments
  • Different handpieces and applications
NUVOLAS is user friendly


Fiber
The easy click connector does not require any turning of screws after it is in place. Click in and it fits. The fibers are attractively priced, due to the plastic connector. Fibers are available in different sizes up to 600 µm.

NUVOLAS finds its use also in...
  • Dermatology - Vessels & Pigments
  • ENT - Endoscopy
  • ENT - Larynx
  • ENT - Otology
  • ENT - Rhinology

More Less

About us

Company details

Laser Innovations “Made in Germany”

A.R.C. is a specialized company for the development and production of medical laser technology. The history of the family-owned business from Nuremberg, Germany, reaches back to the year 1978, when Gisela and Reinhardt Thyzel founded the Meditec GmbH.

By the development of the first Nd:YAG laser for secondary cataract surgery for commercial use, Rheinhardt Thyzel  has set a milestone in ophthalmology. Shortly after, the Meditec Excimer Laser (MEL) for refractive eye treatment followed. Its successor model, the MEL80 from Carl Zeiss Meditec, still embodies the extraordinary innovative strength of the company.

By founding the A.R.C. Laser GmbH in 1996, the Thyzel Family started again a highly innovative business which has set itself the goals of developing and producing laser based solutions for gentle and effective surgeries and treatments. Ranging from highly complex ophthalmic surgeries to nail fungus treatment – 35 years of experience in the medical laser field pay off. Due to its innovations, the A.R.C. Laser GmbH became one of the strongest laser companies worldwide.

Angela Thyzel, daughter of Meditec founder Reinhardt Thyzel, is running the successful business as CEO, while Reinhardt Thyzel can fully dedicate himself to the development of pioneering technologies.


Good to know

Own development
Innovative new products are being designed through close cooperation with end users.

In-house manufacturing
The in-house production in Germany and a QM-system according to EN13485-2003 guarantee highest quality and reliability.

Maintenance / Safety-related check
The safety-related check for our devices which is prescribed by law has to be done every two years.

Your advantages
  • Favorable prices for consumables
  • 24-hour service
  • Personal customer care
Range of products
A.R.C Laser offers modern and up-to-date technology for
  • Ophthalmology
  • Dermatology and Aesthetics
  • Dental
  • ENT
  • Surgery
  • Veterinary

More Less