Remi Elektrotechnik Limited of Dist. Palghar at MEDICA 2017 in Düsseldorf -- COMPAMED Trade Fair
Manufacturers

Remi Elektrotechnik Limited

Building 'B', Survey No. 65/1, Village Valiv, Vasai (East), 401 208 Dist. Palghar
India

Telephone +91 22 40589888
Fax +91 22 40589890
expo@remilabworld.com

Hall map

MEDICA 2017 hall map (Hall 3): stand B88

Fairground map

MEDICA 2017 fairground map: Hall 3

Our range of products

Product categories

  • 02  Laboratory Equipment
  • 02.03  Incubators
  • 02  Laboratory Equipment
  • 02.08  Laboratory refrigerators and cooling systems

Laboratory refrigerators and cooling systems

  • 02  Laboratory Equipment
  • 02.08  Laboratory refrigerators and cooling systems
  • 02.08.01  Upright laboratory freezers

Upright laboratory freezers

  • 02  Laboratory Equipment
  • 02.08  Laboratory refrigerators and cooling systems
  • 02.08.03  Laboratory refrigerators

Laboratory refrigerators

  • 02  Laboratory Equipment
  • 02.08  Laboratory refrigerators and cooling systems
  • 02.08.04  Laboratory deep-freezers
  • 02  Laboratory Equipment
  • 02.17  Agitators

Agitators

  • 02  Laboratory Equipment
  • 02.17  Agitators
  • 02.17.01  Magnetic stirrers

Magnetic stirrers

  • 02  Laboratory Equipment
  • 02.17  Agitators
  • 02.17.02  Stirrers
  • 02  Laboratory Equipment
  • 02.18  Shaking and mixing units

Shaking and mixing units

  • 02  Laboratory Equipment
  • 02.18  Shaking and mixing units
  • 02.18.01  Mixing units for vessels, tubes, etc.

Mixing units for vessels, tubes, etc.

  • 02  Laboratory Equipment
  • 02.22  Centrifuges

Centrifuges

Our products

Product category: Laboratory refrigerators and cooling systems, Upright laboratory freezers, Laboratory deep-freezers

DEEP FREEZER MANUFACTURERS AND EXPORTERS

The REMI Deep Freezers are designed for storage of biological samples in biotech, life science, clinical research as well as medical & pharmaceutical specimens, serums, vaccines, blood components. These freezers are available with temperatures up to -20°C and “ 40°C.
These freezers are available in standard & GMP versions.

SALIENT FEATURES
  • Temperature up to -20°C / -40°C (AC room)
  • Upright models with small foot prints
  • Validation protocol with IQ, OQ, PQ Documentation as per ICH guideline
  • Machine filled PUF insulation to eliminate void pockets
  • Hermetically sealed Compressor with CFC free refrigerant
  • Unique design of thermal barrier for better energy efficiency
  • Microprocessor controller with LED display
  • Sensor failure alarm
  • Digital LED display of Temperature with set, process value & audio visual alarm
  • Adjustable trays
  • Data logger for 8 Point temperature recording with sensor, printer interface and software (Optional)
  • Also available 4 LCD version with additional features
  • Alarms for high/low set parameters
  • Electrical circuit breaker
  • Time delay for compressor switch on
  • Overload cut off relay for compressor

More Less

Product category: Incubators

COOLING INCUBATORS MANUFACTURERS AND SUPPLIERS

REMI Cooling Incubators are designed for applications in pharmaceutical, microbiology, biotechnology, chemical & research labs. These chambers are used for BOD test culture of bacteria, microorganism, tissue culture, incubation, immunological work & storage of vaccines etc.

These incubators are available in standard & GMP versions

SALIENT FEATURES
  • Temperature range 0°C to 60°C
  • Unique design of thermal barrier for better energy efficiency
  • Machine filled PUF insulation to eliminate void pockets
  • Powerful fan motor for forced air circulation to maintain uniform conditions inside chamber
  • Heating by long life SS tubular heaters
  • Chamber calibration port on side
  • Adjustable trays
  • Hermetically sealed Compressor with CFC free refrigerant
  • High temperature safety cut off & alarms for high / low set parameters
  • Sensor failure alarm
  • Electrical circuit breaker
  • Time delay for compressor switch on
  • Overload cut off relay for compressor
  • Rounded inner chamber for easy cleaning
  • Attractive door profile
  • Microprocessor controller with LED display of Temperature with set, process value & audio visual alarm (standard)
  • CLS (Custom Logical Safe) control system with logical safety devices.
  • Optional
    - 4″ LCD display with additional features (Details overleaf)
    - Touch screen display ( TFT ) with additional features(Details overleaf)
    - Validation protocol with IQ, OQ, PQ Documentation

More Less

Product category: Magnetic stirrers, Stirrers, Shaking and mixing units, Mixing units for vessels, tubes, etc.

MAGNETIC STIRRERS PLUS

REMI presents the next generation of magnetic stirrers with new stir technology. These are available in both hotplate & without hotplate versions

SALIENT FEATURES
  • Speeds range 100 – 1500 rpm
  • Porcelain Enamel Hot Plate model for temperatures up to 340°C
  • Stainless Steel Hot Plate model temperatures up to 550°C
  • Easy-to-read backlit LCD for display of set & actual parameters
  • Monitoring of set & actual temperature / speed
  • High accuracy of temperature control with embedded dual sensors
  • Advanced Stirrers with microprocessor technology
  • Constant speed even with change of load / Voltage
  • Maintenance free brushless motor
  • Scratch proof & excellent chemical resistance
  • External temperature probe (PT-1000) for control of fluid temperature
  • Last parameter recall, ideal for repetitive processes
  • Unique safety temperature control system
  • Settable safe temperature limit to avoid overheating
  • Residual Temperature warning when unit is switched off for operator safety
  • Protection class acc. to DIN EN60529

More Less

Product category: Centrifuges

MEDICO CENTRIFUGE

These are low priced units meeting the majority of the small capacity centrifuging requirements of medical practitioners, pathological laboratories and hospitals for routine centrifuging tests. The units are fitted with resiliently mounted motor for vibration free performance having built in 5 step speed regulator. Available with Swing out or Angle rotor.

More Less

Product category: Agitators, Shaking and mixing units, Mixing units for vessels, tubes, etc.

MULTI VORTEXER

The Multi-Tube Vortexer is designed for mechanical and chemical cell lysis, mixing suspensions, and general sample agitation. This vortex mixer gives a distinctly different motion than shaking a sample. With vortexing. greater shearing forces are placed on materials in the bottom of a tube, thus promoting either disruption or solubility. The Multi-Tube Vortex mixer is a tool to provide that extra degree of mixing, however it accommodates full racks of tubes or microwell plates, vials or cylinder as opposed to single tubes. Consequently, this unit is useful for higher throughput mixing of samples.

These vortexers are designed to hold the multiple test tubes, vials, or cylinders. The vortexing action is created by securing the top of the vessel in place while allowing the bottom to move freely in a defined 3.6mm eccentric orbit. Two posts hold support plate securely in place for a quite, rattle-free mixing. Support plate is easily adjusted by loosening knobs and lifting plate up and down. The circular groove around the top of the taller post allows the support plate to swing away from tray for easy removal of samples. The suction-cup feet dampen motion and prevent sliding on work surface. Equipped with a powerful, permanent magnet motor with sealed ball bearings.

More Less

About us

Company details

REMI, founded in 1960, by the late visionary Mr. C. K. Saraf, with a small factory, is today Turning, Evolving, Growing. From a humble beginning, REMI has diversified into multi-product manufacturing divisions to become one of India™s most trusted brands. This year, yet another chapter is written in REMI™s history, as we complete 50 glorious years. Over these 50 epic years, we have dreamt, innovated, succeeded and are on our way to become a world class enterprise.

Headquartered in Mumbai, REMI, today, is a global Laboratory and Blood Banking Instruments manufacturer and exporter. The world class quality products and its talented team of professionals make it a premier player in the country, with a presence in 50 countries across the globe.

At REMI, we pursue research with a pioneer™s zeal by threading new paths and attempting breakthrough products and processes. No wonder, we are pioneers in introducing host of new products in Indian market.

Today, REMI is the industry leader in manufacturing Laboratory/ Magnetic Stirrers & Centrifuges, & Blood Bank Refrigerators / Freezers catering to over 50% of the total Indian demand. Our manufacturing facilities adhere to WHO-GMP guidelines, with ISO 9001-2008 certification for design, manufacturing and supply of Laboratory & Blood Banking Instruments & ISO-13485:2003 for medical devices. All our products are CE marked.

More Less