RMS Medical Products of Chester, NY at MEDICA 2017 in Düsseldorf -- COMPAMED Trade Fair
Manufacturers

RMS Medical Products

24 Carpenter Road, 10918 Chester, NY
United States of America

Telephone +1 845 469-2042
Fax +1 845 469-5518
sales@rmsmedpro.com

This company is co-exhibitor of
Messe Düsseldorf North America

Hall map

MEDICA 2017 hall map (Hall 16): stand D18-15

Fairground map

MEDICA 2017 fairground map: Hall 16

Our range of products

Product categories

  • 01  Electromedical equipment / Medical Technology
  • 01.03  Therapie and physical medicine
  • 01.03.04  Infusion technology equipment
  • 01  Electromedical equipment / Medical Technology
  • 01.03  Therapie and physical medicine
  • 01.03.04  Infusion technology equipment
  • 01.03.04.16  Infusion pumps
  • 01  Electromedical equipment / Medical Technology
  • 01.03  Therapie and physical medicine
  • 01.03.04  Infusion technology equipment
  • 01.03.04.18  Infusion systems
  • 01  Electromedical equipment / Medical Technology
  • 01.08  Surgery and Endoscopy
  • 01.08.01  Suction devices
  • 01  Electromedical equipment / Medical Technology
  • 01.08  Surgery and Endoscopy
  • 01.08.01  Suction devices
  • 01.08.01.01  Manual suction devices

Our products

Product category: Infusion technology equipment, Infusion pumps, Infusion systems, Suction devices, Manual suction devices

FREEDOM60®

Improve your infusion experience
The FREEDOM60® DynEQ Syringe Infusion System is here to revolutionize your infusions with a new way of thinking.

FREEDOM60® Key Features:

Quality Assured
Made in the USA with highest level of quality control for defect-free product. No product maintenance needed.

Safe constant pressure
Highly accurate constant pressure pump for safe delivery. Maintains pressure of 13.5 psi.

DynEQ™ (Dynamic Equilibrium)
If pressure in sites increase, the system immediately responds by automatically slowing down.

Advanced Technology
Advanced technology All parts are designed to fit & work together within the pump. The Negator motor is the 'heart' of the FREEDOM60®.

Easy to use & learn
only 2 controls. Just Wind, load & go!

Recessed on/off switch
No inadvertent shut off.

Large wind knob
Ergonomic, easy to grasp & turn, disengages when the pump is ON, cannot be overwound.

Portable
No batteries or electricity needed. Comes with a travel pouch to promote patient independence.

Standard 60ml capacity
Easy to handle and purge of air. Can be filled from 1ml to 60ml.

Spring-loaded syringe holder
Locks syringe into the pump & maintains proper syringe orientation, prevents inadvertent removal during infusion.

Syringe Shield
Easy to check infusion progress, protects the syringe

Rugged
Robust design with a molded ABS plastic housing. No sensitive electric parts

More Less

Product category: Infusion technology equipment, Infusion pumps, Infusion systems, Suction devices, Manual suction devices

FreedomEdge®

A compact infusion solution for smaller doses
Infusing small or often-repeated doses of medication? Make frequent and flexible dosing a reality – in a safe, controlled manner with the FreedomEdge® DynEQ Syringe Infusion System.

FreedomEdge® Key Features:

Quality assured
Made in the USA with highest level of quality control for defect-free product. No product maintenance needed.

Safe constant pressure
Highly accurate constant pressure pump for safe delivery - maintains pressure of 13.5 psi.

DynEQ™ (Dynamic Equilibrium)
If pressure in sites increase, the system immediately responds by automatically slowing down.

Ideal for all users
Maximum simplicity for all users - small hands, limited dexterity & limited strength.

Easy to use & learn
No controls - just load, close & go!

Fits 20ml & 30ml syringes
Easy to handle and purge of air. Can be filled from 1ml to 30ml.

Progress window
Easy to check infusion progress.

Silent operation
Convenient and for patients - no unnecessary alarms & noise.

Portable
No batteries/electricity needed. Comes with a travel pouch to promote patient independence.

More Less

Product category: Infusion technology equipment, Infusion pumps, Infusion systems, Suction devices, Manual suction devices

recision Flow Rate Tubing™

Precise infusion times
RMS Precision Flow Rate Tubing™ controls the infusion rate of the Freedom DynEQ™ syringe infusion systems. When combined with the viscosity of the medication and safe pressure of the Freedom DynEQ™ infusion systems, Precision tubing provides an accurate delivery to respond in real time to a patient’s needs.

RMS Precision Flow Rate Tubing™ Key Features:

Safety first
Designed for uniform flow profiles, with no free-flow, bolus or overdose.

Accurate infusion rates
Low residual volumes & precise dimensions help to achieve desired flow rate.

DynEQ™ (Dynamic Equilibrium)
If pressure in sites increase, the system immediately responds by automatically slowing down.

Quality assured
Made in the USA with highest level of quality control for defect-free product. No product maintenance needed.

Low residual volumes
Consistent delivery of medication for a full therapeutic dose without expensive drug waste, ≤ 0.16mL.

Emergency slide clamp
Stop flow immediately, if needed. F-number printed on clamp to assure correct tubing is being used.

Luer disc
Helps prevent contamination. For patient safety, pump is de- signed not to work unless a set with this disc is present.

Deliver in minutes-days
Sets from F0.5 - F2400 offer precise infusion rates for a variety of administration times.

RMS tubing calculator
Convenient tool to help determine the appropriate tubing set for desired sub-q infusion duration.

More Less

Product category: Infusion technology equipment, Infusion pumps, Infusion systems, Suction devices, Manual suction devices

HIgH-Flo Subcutaneous Safety Needle Sets™

Designed with comfort in mind
HIgH-Flo needles are made with safety and comfort in mind. Every feature of HIgH-Flo is optimized for sub-q. These needles were designed specifically to work with RMS Precision Flow Rate Tubing™ and a Freedom Pump as a total infusion system, with options for every patient.

HIgH-Flo Subcutaneous Safety Needle Sets™ Key Features:

Backcut needle tip
Minimizes damage, scarring & local site reactions. Promotes faster healing.

Flexible flying hinge
Wings have great flexibility & allow each needle to stay in place without any tenting.

Safety closure
Protects against accidental needle sticks.

Custom luer
Designed to provide even flow to every site.

Set options
Sets are available in single, double, triple, quad, penta and hexa configurations.

Needle lengths
Needles are available in 4mm, 6mm, 9mm, 12mm, & 14mm lengths.

Needle gauges
26g designed for sub-q rates up to 30ml/hr/site & 24g for up to 300ml/hr/site.

Tubing length
Efficient and practical 20” length (in 26g sets) for less tangles & faster flow rates.

Extension set
Available for those who prefer a longer length.

Y-Connector
Combines sets for more than 6 sites (up to 8), or to infuse with different length needles.

3M Tegaderm™
Transparent dressing that is preferred by most patients is included with all sets.

More Less

Product category: Infusion technology equipment, Infusion pumps, Infusion systems, Suction devices, Manual suction devices

RES-Q-VAC®

Dependable suctioning, when you need it
Every day, first responders, EMS operators and technicians, hospitals, nursing homes, home care, the military, and others need portable hand-held suction units for emergency situations. Whether on a crash cart, at the scene of an accident or during patient transport, using RES-Q-VAC® can save a life.

RES-Q-VAC® Key Features:

Portable
Lightweight (0.5lbs) & compact for challenging conditions.

Manual Power
No batteries/electric required − works in natural disasters, or anytime the power fails.

Reusable pump handle
Minimal effort required & can be used repeatedly.

300ml canister
Simply attaches to pump handle. Filtered/non-filtered options with gradations for easy monitoring.

Powerful vacuum
Comparable to electric suction at >600mmHg. Easily can clear vomit, clotting blood, & mucus.

Custom configurations
Customizable for infant through adult suctioning in sterile & non-sterile options.

Versatile
Wide range of kits for variety of markets: hospital, EMS, longterm healthcare, home care, etc.

Full Stop Protection®
0.22 Micron filter - safeguards from pathogens & infectious diseases. Prevents overflow.

Whistle-tipped catheters
Hospital grade − prevents tissue damage. Equipped with push connectors for ease of use.

Continuous suctioning
Suctions until fluids or obstructions clear tubing with little pumping required.

Molded ABS plastic
Rugged, durable & operates under temperatures ranging from 0-140 degrees Fahrenheit.

Silent operation
Eliminates patient anxiety that can be triggered by complicated set-up & noises of electric pumps.

Highly visible carrying pouch
Easy to locate for rapid access. Ample storage, for suctioning equipment, yet is compact

More Less

About us

Company details

You may have heard of Repro Med Systems, Inc. That’s us! Today, we are operating as RMS Medical Products, a leading developer and manufacturer of medical devices and supplies. The company was incorporated in March, 1980 and is now publicly traded . Our stock symbol is REPR.

Worldwide, RMS Medical Products drives healthcare inspiration – in the minds of our patients, our employees, our customers and our shareholders – to give everyone greater freedom for living. We design and manufacture safe, affordable medical devices to make quality healthcare a reality for everyone.

We focus on home and specialty infusion solutions, emphasizing responsive problem-solving for our customers, and careful consideration for the patient experience. Our primary products are the FREEDOM60® and FreedomEdge®DynEQ Infusion Systems, RMS Precision Flow Rate Tubing™, HIgH-Flo Subcutaneous Safety Needle Sets™ and RES-Q-VAC® Hand Held Medical Suction.

We are passionate about helping people with our reliable medical devices made at our HQ in Chester, NY (USA). Our products, as well as product support, are offered worldwide by RMS and through a global network of distributors and service providers.

RMS is excited to expand into new markets with innovative, more technical products. We look forward to productive partnerships with people and companies who share our vision and can help us effectively deliver our value promise to stakeholders in our industry.

More Less