Clippard Europe S.A. of Louvain-la-Neuve at COMPAMED 2019 in Düsseldorf -- COMPAMED Trade Fair
Manage stand orders
Select Option

Clippard Europe S.A.

Rue du Bosquet, 6 Parc Scientifique Einstein, 1348 Louvain-la-Neuve
Telephone +32 10 452134
Fax +32 4757 65221

Hall map

COMPAMED 2019 hall map (Hall 8b): stand G07

Fairground map

COMPAMED 2019 fairground map: Hall 8b

Our range of products

Product categories

  • 05  Components, modules, OEM equipment
  • 05.02  Pneumatic actuators

Pneumatic actuators

  • 05  Components, modules, OEM equipment
  • 05.13  Other components, modules, OEM equipment

Other components, modules, OEM equipment

  • 06  Electrical components, electronical components
  • 06.14  Other electrical / electronical components

Other electrical / electronical components

  • 07  Microtechnology
  • 07.07  Microfluidics


Our products

Product category: Valves

Check Valves

Check valves allow flow in one direction and automatically prevent flow in the opposite direction. Clippard check valves feature durable brass body construction with Nitrile seals and a stainless steel spring. A variety of porting options are available.

  • #10-32 Check Valves
  • 1/8" NPT Check Valves
  • 1/4" NPT Check Valves
  • 3/8" NPT Check Vavles
  • Pilot-Operated Check Valves

More Less

Product category: Valves

Drawback Valves

Pilot actuated water drawback valves are ideal for use in quenching or water spray applications. When closed, a spring-based internal piston draws back a small volume on the outlet side.

  •  #10-32 Drawback Valve
  • 1/8" NPT Drawback Valve

More Less

Product category: Valves

Electric & Pneumatic Switches

Air operated electric switches convert air pressure to an electrical signal, providing an interface between pneumatic systems and electrical controls.

  • Single Pole Electrical Switch
  • Air-to-Electric Switches
  • Pressure Actuated Switches
  • Miniature Air Actuated Switches

More Less

Product category: Valves

Clippard Minimatic® Quick Exhaust Valves

Clippard’s J-Series Exhaust Valve offers a variety of design features and provides fast response times and high flow with 1/8” and 1/4” NPT ports. This compact poppet type valve is constructed of brass and is 100% tested to assure the highest quality. The JEV’s primary function is to increase cylinder speed. However, it also enables the use of smaller directional valves, longer control lines and can be used as a shuttle valve.


  • Enables use of smaller control valves
  • 15 to 150 psig maximum
  • Male outlet offers direct connection to cylinder
  • Up to 1,600 l/min @ 100 psig
  • Low shift ratio
  • Over 32 standard configurations
  • Custom configurations also available
  • Brass construction with molded Nitrile seal

More Less

Product category: Valves

Flow Controls

Clippard offers four styles of adjustable flow controls with #10-32 through 3/8" NPT ports. These precision flow control valves are ideal for use with pneumatic cylinders, providing a slow extend stroke while allowing a fast retract stroke. Flow control valves are also used for delay functions when using air pilot valves.

  • Combination Needle/Check Valve Flow Controls
  • Push-Quick Right Angle Elbow Flow Controls
  • Push-Quick In-Line Flow Controls
  • Block Manifold Flow Controls

More Less

Product category: Valves


Gauges measure pneumatic system or pneumatic vacuum pressures. Constructed with a steel case and plastic face, these gauge dials show two pressure ranges and feature a built-in pressure snubber.

  • Vacuum Gauge
  • Pressure Gauge
  • 1/8" NPT Pressure Gauge

More Less

Product category: Valves

Clippard Speed Control Mufflers

Clippard's speed control mufflers utilize porous sintered bronze air mesh to reduce the sound as well as control the flow rate from valves, cylinders and other pneumatic products during exhaust. T knurled knob length is based on the minimum thread engagement. Available with 1/8”, 1/4”, 3/8” and 1/2” pipe threads. 40 micron filter.

More Less

Product category: Valves

Clippard Miniature Needle Valves

Adjustable control needle valves restrict flow in both directions. There are eight models offered by Clippard with various ports and needle configurations to provide coarse or fine flow adjustment.  The diagram of needle shapes and the part show the difference between these models.

  • #10-32, 1/4" NPT, 1/8" NPT and 3/8" NPT Ports
  • Direct, in-line or cartridge mounting
  • Brass or ENP body, ENP or stainless steel needle, Nitrile seal
  • Screwdriver or knurled knob adjustment

More Less

About us

Company details

miniature pneumatic – for highest requirements

Founded in 1941 by W. L. Clippard, Jr., the company started out manufacturing electronic test equipment. In the 1950’s, Mr. Clippard recognized a need for miniature pneumatic devices in manufacturing, and began to produce a small line of component products. The appeal of these products was such that by the late 1960’s, Clippard Instrument Laboratory was strictly a pneumatic manufacturer.

The company has continued to have steady growth through the years bolstered by periodic introductions of new and innovative products. These have included such products as the Modular series and the Mouse Valve series; the Electronic Proportional Valves, and Electronic Manifold Cards.

Today, the company remains family-owned and operated. Manufacturing facilities are located in Cincinnati and Fairfield, Ohio; as well as a distribution and technical support center in Louvain-La-Neuve, Belgium.

Clippard is in its seventh decade of supplying fluid power, motion and process control devices to the Scientific, Medical, Dental, and Analytical markets. We understand the need for precision, reliability and purity in your critical applications and are dedicated to providing expert solutions to meet and exceed your expectations. We ensure that every product meets the highest standards of quality and performance by 100% testing all products before they reach our customers.

In addition to the Scientific market segment, Clippard offers expertise in a wide variety of markets utilizing numerous types of applications. From Semiconductor to Printing, Automotive to Packaging, our products are engineered to the exact specifications you require. Supported by a platform of over 5.000 standard products, as well as customized solutions, we have the capability to provide you with a full range of products designed to meet the unique demands of your application.

More Less