ES SYSTEMS of Koropi, Athens at COMPAMED 2019 in Düsseldorf -- COMPAMED Trade Fair
Manage stand orders
Select Option
Manufacturers

ES SYSTEMS

57 I. Metaxa Str., 19441 Koropi, Athens
Greece
Telephone +30 216 2000500
Fax +30 216 2000555
info@esenssys.com

This company is co-exhibitor of
IVAM Microtechnology Network

Hall map

COMPAMED 2019 hall map (Hall 8a): stand F29

Fairground map

COMPAMED 2019 fairground map: Hall 8a

Contact

NIKOLAS VALANTASSIS-KANELLOS

BUSINESS DEVELOPMENT MANAGER

Greece

Phone
+30 216 2000500

Email
info@esenssys.com

Our range of products

Product categories

  • 01  Manufacturing of components
  • 01.01  Electronic manufacturing services (EMS)
  • 01.01.07  Electronis full service
  • 06  Electrical components, electronical components
  • 06.01  Sensors
  • 06.01.05  Flow sensors
  • 07  Microtechnology
  • 07.04  Microsensors

Microsensors

  • 07  Microtechnology
  • 07.05  Microelectronics

Our products

Product category: Pressure sensors

ESCP-BMS1 Board Mountable MEMS Capacitive Pressure Sensors

ES Systems has developed a series of board mountable pressure sensors targeting a variety of markets requiring high resolution and accuracy for absolute, gauge or differential pressure measurements. The ESCP-BMS1 is a MEMS capacitive pressure sensor with state-of-theart performance. The MEMS pressure sensor die is underpinned by ES’ innovative SOI-surface micromachining technology.

ESCP-BMS1 is an absolute, gauge or differential pressure sensor of ultrahighresolution with analog (0-3,3V), PWM, SPI or I2C interface. The output is fully calibrated, and temperature compensated based on the internal temperature sensor and the factory calibration coefficients which are stored in the embedded memory. The sensor is ready to be installed directly to the end system without further processing. The total error including repeatability, hysteresis, non-linearity, thermal offset and calibration error between 0oC and 60oC is better than 0.25% FS.

Different power modes are available enabling low power operation, while the output rate and thus the conversion speed is programmable allowing the end user to customize/optimize performance. The sensor can be configured to provide both high accuracy 32-bit pressure and temperature outputs.

ESCP-BMS1 is a silicon capacitive pressure sensor with excellent longterm stability. The sensor is incorporated in a standard 8-pin DIP package with a single or two pneumatic ports. The top port is the high side and the bottom port is the low side.

More Less

Product category: Pressure sensors

ESCP-MIS1 Medium Isolated MEMS Capacitive Pressure Sensors

ES Systems has developed a series of medium isolated pressure sensors suitable for applications with harsh environmental conditions where resistance to corrosive fluids or gases is required. Each sensor integrates a MEMS capacitive pressure sensor die, and a CMOS ASIC for the signal conditioning. The MEMS pressure sensor dies are underpinned by ES’s innovative microfabrication process for silicon capacitive sensors.

The capacitive pressure sensor dies integrated into the medium isolated pressure systems provide state-of-the-art accuracy and resolution, excellent long-term stability combined with very good repeatability and hysteresis. The total overall error including thermal offsets is lower than ±0.25% FS.

The ESCP-MIS1 is a family of pressure sensors in the standard Ø19 stainless steel 316L capsule. In this type of sensors, the pressure is transferred hydraulically to the hermetically sealed sensing element through the Silicon Oil used to fill the cavity between the sensing element and the stainless steel diaphragm. The pressure capsule interface is either I2C or analog. The sensors are provided calibrated and compensated at various temperature and pressure ranges from 1 bara to 400 bara. Custom materials like Hastelloy or Titanium are available upon request.

More Less

Product category: Pressure sensors

ESPP-MIT1 Series Micro-Fused Strain Gauge Pressure Transmitters

ES Systems has developed a series of pressure sensor transmitters featuring very good accuracy at low cost. Each module is based on all welded hermetically sealed structure in a single stainless-steel piece. The ESPP-MIT1 is a medium isolated pressure sensor suitable for gas or fluid pressure measurements in harsh environments.

The output is fully calibrated and temperature compensated based on the internal temperature sensor and the factory calibration coefficients which are stored in the embedded memory. Thus, the transducer is ready to be installed directly to the end user system without further processing.

ESPP-MIT1 comes with a variety of electrical interfaces output signal types and process interfaces. It is one of the most cost-effective solutions especially when high volumes are required.

More Less

Product category: Flow sensors

ESRF-ESF Series Inline Gas Flow Sensors

ES Systems has developed ESRF-ESF, a MEMS gas flow sensor family, based on hot-film anemometer principle for mass gas flow measurements.

ESRF-ESF gas flow sensors feature bidirectional gas flow sensing of up to ±500 ln/min with a total error band of 1% m.v. The streamlined symmetrical body design, manufactured from high quality plastic, presents very low pressure drop even at the maximum flow in both directions. Calibration gas is air, but other non-aggressive gases are available upon request.

Operating down to 3.3V supply voltage, ESRF-ESF gas flow sensors provide calibrated and temperature compensated output on an SPI or I2C bus making them plug & play for direct interfacing to low voltage MCUs and systems. The user is provided with a multitude of options (e.g. power supply, uni/bi directionality or analog output) so that the right sensor configuration can be selected based on the specific requirements for each application.

Due to the compact design, and versatility, ESRF-ESF gas flow sensors are ideal for medical, process & pharmaceutical equipment where high accuracy and reliability are of the essence.

More Less

Product category: Pressure sensors

ESCP-MIT1 Medium Isolated MEMS Capacitive Pressure Transmitters

ES Systems has developed a series of medium isolated pressure transmitters suitable for applications with harsh environmental conditions where resistance to corrosive fluids or gases is required. Each sensor integrates a MEMS capacitive pressure sensor die, and a CMOS ASIC for the signal conditioning. The MEMS pressure sensor dies are underpinned by ES Systems’ innovative microfabrication process for silicon capacitive sensors.

The ESCP-MIT1 of capacitive pressure sensor dies integrated into the medium isolated  pressure systems provide state-of-the-art accuracy and resolution, excellent long-term stability combined with very good repeatability and hysteresis. The total overall error including thermal offsets is lower than ±0.25% FS. 

 The ESCP-MIT1 is a family of heavy-duty pressure transmitters made from stainless steel 316L. Each transmitter consists of an ESCP-MIS1 sensor, which is O-ring fitted to the housing. The pressure transmitters come in various standard pneumatic ports as well as custom ones upon

request. The electrical interface can be either analog (4-20 mA, 0-10 V) or digital (I2C). The sensors can be provided calibrated and compensated at various temperature and pressure ranges from 1 bar to 400 bar. Custom configurations of a variety of pneumatic interfaces, Hastelloy or Titanium material, and output interface are available upon request.

More Less

Product category: Pressure sensors

MEMS Capacitive Pressure Transmitter for Aerospace Applications

ES Systems is currently developing an ITAR free family of Standard Accuracy Pressure Transducers (SAPT) for space applications. ESCP-SAPT can be integrated within propulsion systems in order to measure the static pressure of the propelant fluid. ESCP-SAPT is compatible with various fluids, including the new generation of green propellants.

ESCP-SAPT pressure transmitters consist of a MEMS capacitive pressure sensor die, which is underpinned by ES’ innovative microfabrication process that has been proven suitable for the mechanical, radiation and temperature environment of space applications. The full custom, radiation hardened signal conditioning IC was designed entirely by ES, utilizing a standard deep submicron CMOS process of a European foundry.

ESCP-SAPT is an all welded Titanium (Ti6AI4V) sensor, optimized to achieve the lowest mass possible (<160 g) combined with compact size (110mm x 55mm x 40mm), while being compatible with both low pressure ranges (7 bar, 22bar) and high pressure ranges (150 bar, 310 bar).

ESCP-SAPT features an analog pressure output (0-5 V) along with temperature reading to accommodate offline calibration and temperature compensation and reach accuracy of ±0.3 % FS.

More Less

Product category: Microelectronics

ESEN-MESN Multipurpose Environmental Sensing Nodes

ES Systems has developed an environmental sensing board system featuring multiple sensors for environmental monitoring that can be utilized in a variety of applications and industries.

The ESEN-MESN system integrates pressure, humidity, temperature, TVOC, CO, NO2, CO2 sensors that can be integrated in custom tailored boards that fit each end user’s tailored defined mechanical specifications.

ESEN-MESN supports both wired and wireless communication enabling optimal connectivity capabilities. The wireless capability enables installation in remote locations with minimal installation cost. ESEN-MESN supports various wireless communication protocols making it easy to integrate in any network infrastructure.

More Less

Product category: Electronis full service

ESMS-ECM Equipment Condition Monitoring System

ES Systems has developed a complete smart system solution for condition monitoring of industrial equipment. The ESMS-ECM system features synchronous sensor sampling with wireless communication enabling optimal vibration and condition monitoring of equipment. The wireless capability enables installation at remote locations with minimal installation cost. ESMS-ECM supports WiFi and BLE 4.0 wireless protocols allowing installation and communication integration in existing wireless infrastructures.

ESMS-ECM is the first condition monitoring system worldwide that supports wireless and synchronous multichannel data sampling, a necessary feature for vibration monitoring and frequency pattern analysis. ESMS-ECM can integrate any kind of sensor that communicates with 0-10V, 4-20mA, MODBUS-RTU, RS-232, Digital I/O, I2C.

The data collected from the ESMS-ECM system are transferred to the cloud or to secure servers where end users can execute their predictive maintenance algorithms.

More Less

Product category: Flow sensors

ESRF-HF Insertion Gas Flow Transmitters

ES Systems has developed ESRF-HF, a family of insertion gas flow transmitters, based on the hot-film anemometer principle for mass gas flow measurements. 

The ESRF-HF is a family of mass flow transmitters which enable fast and accurate measurements of gas flow over a wide dynamic range. Each transmitter integrates a MEMS flow sensor and readout electronics inside a housing with very small form factor made from stainless steel. The duty pressure of the flow transmitter is 11bar. All measurement data are fully calibrated, and temperature compensated on board, leading to a reduced temperature coefficient and high measurement accuracy. 

 The standard system provides analog signal output, with excellent repeatability and hysteresis combined with good resolution. Calibration gas is air, but other non-aggressive gases can be also available upon request. 

  The compact size of the ESRF-HF flow transmitters combined with the ruggedized stainless-steel housing makes them ideal for use in industrial applications within confined spaces. For easier handling and mounting, a series of in-line pipe adaptors (Ø20, Ø25, Ø32) is also available upon request.

More Less

About us

Company details

ES Systems is a  developer and manufacturer of high quality sensors based on micro-electronics technologies.

ES Systems, MEMS based, sensors and sensor systems, which are produced via qualified industrial processes, measure pressure, gas flow and temperature. Combining multiple discipline capabilities, ES Systems delivers technological advanced sensor solutions in a fast and efficient way starting from the concept to prototyping and full production.

Our flexibility along with the dedicated to the client ensures a high-end custom-made product within a limited time frame ready to be installed to the application without any additional modifications. ES Systems is employed in sophisticated control and monitoring applications in the industrial, medical, aerospace and consumer markets either as stand-alone components or being integrated within equipment.

Towards the latest requirements and developments of the 4rth industrial revolution, ES Systems has developed innovative smart, autonomous, low power and wireless sensors ideal for integration to IoT systems and solutions.

More Less