Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
EUROFLEX GmbH
Kaiser-Friedrich-Str. 7,
75172
Pforzheim
Germany
Germany
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Contact
Dr. Jochen Ulmer
Director Business Unit Semi-Finished Products
Hermann Schmidt
Head of Sales Medical Semi-Finished Products
Florian Kuderna-Jochim
Project Manager Sales Semi - Finished Products
Sandra Rozanski
Project Manager Sales Medical Components
Please log in
You must be logged in to use matchmaking
Please log in for matchmaking
Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.
Let's get started!
Welcome to Matchmaking. Would you like to get in touch with ?
Visit us
17 Nov 2020
Topic
11:20 - 11:50
Next Generation Materials for Medical Implants
The medical industry as a very innovative sector is constantly optimizing current products and is also looking into new medical applications to increase lifetime and improve quality of life for patients.One of the important aspects in those developments are the requirements for the materials which should be able to fulfill the new designs.
The presentation will review the metal material aspects.
The presentation will review the metal material aspects.
Our range of products
Product categories
- 01 Manufacturing of components
- 01.04 Metal machining processing
- 01.04.03 Metal cutting, chip removal
Metal cutting, chip removal
- 01 Manufacturing of components
- 01.05 Surface treatment
- 01.05.01 Mechanical surface refinement
Mechanical surface refinement
- 01 Manufacturing of components
- 01.05 Surface treatment
- 01.05.03 Surface coating
Surface coating
- 01 Manufacturing of components
- 01.06 Laser processing
- 01.06.01 Laser cutting
Laser cutting
- 01 Manufacturing of components
- 01.06 Laser processing
- 01.06.02 Laser welding
Laser welding
- 01 Manufacturing of components
- 01.06 Laser processing
- 01.06.03 Laser marking
Laser marking
- 01 Manufacturing of components
- 01.09 Other component manufacturing
Other component manufacturing
- 05 Components, modules, OEM equipment
- 05.12 Tubings and tubing equipment
Tubings and tubing equipment
- 08 Raw materials, materials, adhesives
- 08.02 Metals
Metals
- EXTRA-SMOOTH NITINOL TUBES, HCF, STAINLESS STEEL, COBALT-ALLOYS, TANTALUM, SPECIAL ALLOYS
- COMPONENTS FOR MEDICAL APPLICATIONS NITINOL, STAINLESS STEEL, COBALT-ALLOYS
- ELECTROPOLISHED NITINOL WIRE SUPERELASTIC, SHAPE-MEMORY, HCF
- CONTINUOUSLY FLAT-ROLLED SHEET
- LASER PROCESSING
- NITINOL SPRINGS
- COMPONENTS TURNED AND MILLED
- BENDED PARTS NITINOL, CNC-CONTROLLED
- 08 Raw materials, materials, adhesives
- 08.04 Composites
Composites
- 08 Raw materials, materials, adhesives
- 08.05 Semi-finished products
Semi-finished products
- EXTRA-SMOOTH NITINOL TUBES, HCF, STAINLESS STEEL, COBALT-ALLOYS, TANTALUM, SPECIAL ALLOYS
- COMPONENTS FOR MEDICAL APPLICATIONS NITINOL, STAINLESS STEEL, COBALT-ALLOYS
- ELECTROPOLISHED NITINOL WIRE SUPERELASTIC, SHAPE-MEMORY, HCF
- NITINOL FLAT AND PROFILED WIRE, STAINLESS STEEL, TAPERED, RECTANGULAR, OVAL
- CONTINUOUSLY FLAT-ROLLED SHEET
- LASER PROCESSING
- NITINOL SPRINGS
- COMPONENTS TURNED AND MILLED
- BENDED PARTS NITINOL, CNC-CONTROLLED
Our products
Product category: Semi-finished products, Metal cutting, chip removal, Mechanical surface refinement, Surface coating, Laser cutting, Laser welding, Laser marking, Metals, Composites, Other component manufacturing, Tubings and tubing equipment
EXTRA-SMOOTH NITINOL TUBES, HCF, STAINLESS STEEL, COBALT-ALLOYS, TANTALUM, SPECIAL ALLOYS
... with oxidized or ground surface
Tubes are available in:
Based on the worldwide proven standards of excellence for strength, superelasticity, formability, corrosion resistance and biocompatibility as our standard Nitinol material for implants, Nitinol HCF-SE is a consequent evolution. It allows to design next generation improved generation components, which will become smaller and more sophisticated in size and fields of application. A more than 10 times higher fatigue life has been reported. This makes the material the first choice for high-cycle fatigue devices like heart-valve frames and spine implants.
Tubes are available in:
- Nickel-Titanium-Alloys (Nitinol superelastic, shape-memory, HCF)
- Cobalt-Based-Alloys (L605; MP35N)
- Stainless Steel (316LVM, 316Ti, 316L, 304, 304L, 321, 17-7 PH)
- Titanium-Based-Alloys (Titan-Grade 2)
- Tantalum
- Platinum-Alloys (Pt, PtIr10, PtIr20, PtW8, PtW5)
- Special Alloys (Magnesium, Zinc)
Based on the worldwide proven standards of excellence for strength, superelasticity, formability, corrosion resistance and biocompatibility as our standard Nitinol material for implants, Nitinol HCF-SE is a consequent evolution. It allows to design next generation improved generation components, which will become smaller and more sophisticated in size and fields of application. A more than 10 times higher fatigue life has been reported. This makes the material the first choice for high-cycle fatigue devices like heart-valve frames and spine implants.
Product category: Semi-finished products, Mechanical surface refinement, Surface coating, Laser cutting, Laser welding, Laser marking, Metals, Metal cutting, chip removal, Other component manufacturing
COMPONENTS FOR MEDICAL APPLICATIONS NITINOL, STAINLESS STEEL, COBALT-ALLOYS
Beside semi-finished products like wires, profiles or tubes, EUROFLEX also offers customer specified components. They can be cut, formed and bent. In addition EUROFLEX can offer various surface treatments like sand-blasting, trumbling, etching, polishing or plating. Combining those processing capabilities with Nitinol and it shape-setting properties opens a wide range to design functional components with superelastic or shape-memory behaviour.
The consistently high quality level of our products is ensured by a management system certified in accordance with DIN EN ISO 13485.
The consistently high quality level of our products is ensured by a management system certified in accordance with DIN EN ISO 13485.
Product category: Semi-finished products, Mechanical surface refinement, Surface coating, Metals, Composites
ELECTROPOLISHED NITINOL WIRE SUPERELASTIC, SHAPE-MEMORY, HCF
... with oxidized or oxid-free surface
Round wires are available in:
Based on the worldwide proven standards of excellence for strength, superelasticity, formability, corrosion resistance and biocompatibility as our standard Nitinol material for implants, Nitinol HCF-SE is a consequent evolution. It allows to design next generation improved generation components, which will become smaller and more sophisticated in size and fields of application. A more than 10 times higher fatigue life has been reported. This makes the material the first choice for high-cycle fatigue devices like heart-valve frames and spine implants.
possible Applications:
- Neurovascular applications
- Orthopedic equipment
- plaited stents
- AAA-devices
benefits:
- high corrosion resistance high biocompatibility
- smooth, bright surface
Round wires are available in:
- NITINOL-Alloys (Nitinol superelastic, shape-memory, HCF)
Based on the worldwide proven standards of excellence for strength, superelasticity, formability, corrosion resistance and biocompatibility as our standard Nitinol material for implants, Nitinol HCF-SE is a consequent evolution. It allows to design next generation improved generation components, which will become smaller and more sophisticated in size and fields of application. A more than 10 times higher fatigue life has been reported. This makes the material the first choice for high-cycle fatigue devices like heart-valve frames and spine implants.
possible Applications:
- Neurovascular applications
- Orthopedic equipment
- plaited stents
- AAA-devices
benefits:
- high corrosion resistance high biocompatibility
- smooth, bright surface
Product category: Semi-finished products
NITINOL FLAT AND PROFILED WIRE, STAINLESS STEEL, TAPERED, RECTANGULAR, OVAL
... with oxidized or oxid-free surface
Available materials:
- Tapered
- Rectangular and oval
- Radial grinding
Available materials:
- NITINOL (Nitinol superelastic, shape-memory, HCF)
- Stainless Steels
- Tapered
- Rectangular and oval
- Radial grinding
Product category: Semi-finished products, Metal cutting, chip removal, Mechanical surface refinement, Surface coating, Metals
CONTINUOUSLY FLAT-ROLLED SHEET
Nitnol strips with oxidized surface
- Material certified to ASTM F2063
- superelastic
- Af <10°C
- Oxidic surface
- On coils or in fix lengths
- Natural rolling or cut edges
- Material certified to ASTM F2063
- superelastic
- Af <10°C
- Oxidic surface
- On coils or in fix lengths
- Natural rolling or cut edges
Product category: Laser cutting, Laser welding, Laser marking, Metal cutting, chip removal, Other component manufacturing, Tubings and tubing equipment, Metals, Semi-finished products
LASER PROCESSING
EUROFLEX offers laser cutting as an additional option in the area of medical components. With this process, metal products can be cut to precise, customer-specific designs, including complex geometries and shapes.
Labeling and inscribing of components can be realized using precise laser markings.
Welding technologies such as laser beam welding provide an effective connection between materials from different components and the closing of tube ends.
Materials:
• Nitinol
• Cobalt-Based-Alloys (L605, MP35N)
• Stainless Steel (316LVM, 316Ti, 316L, 304, 304L, 321, 17-7 PH)
Labeling and inscribing of components can be realized using precise laser markings.
Welding technologies such as laser beam welding provide an effective connection between materials from different components and the closing of tube ends.
Materials:
• Nitinol
• Cobalt-Based-Alloys (L605, MP35N)
• Stainless Steel (316LVM, 316Ti, 316L, 304, 304L, 321, 17-7 PH)
Product category: Metals, Semi-finished products, Other component manufacturing
NITINOL SPRINGS
EUROFLEX is able to process superelastic Nitinol springs as well as shape memory alloy spirals.
On our state-of-the-art machinery, nitinol springs can be produced i.e. for actuators as well as for microcoils.
Other materials on request.
On our state-of-the-art machinery, nitinol springs can be produced i.e. for actuators as well as for microcoils.
Other materials on request.
Product category: Metals, Semi-finished products, Other component manufacturing
COMPONENTS TURNED AND MILLED
In order to give your product the shape you desire, metals can be processed using various machining methods to meet customer requirements. EUROFLEX offers processes such as turning, drilling, milling and grinding.
Materials:
• Nickel-Titanium-Alloys Nitinol
• Cobalt-Based-Alloys (L605, MP35N)
• Stainless Steel (316LVM, 316Ti, 316L, 304, 304L, 321, 17-7 PH)
• Nickelfree Stainless Steel -Alloys
• Titanium-Based-Alloys, (Titan-Grade 2)
• Tantalum
• Platinum-Alloys - Pt, PtIr10, PtIr20, PtW8, PtW5
Materials:
• Nickel-Titanium-Alloys Nitinol
• Cobalt-Based-Alloys (L605, MP35N)
• Stainless Steel (316LVM, 316Ti, 316L, 304, 304L, 321, 17-7 PH)
• Nickelfree Stainless Steel -Alloys
• Titanium-Based-Alloys, (Titan-Grade 2)
• Tantalum
• Platinum-Alloys - Pt, PtIr10, PtIr20, PtW8, PtW5
Product category: Metals, Semi-finished products, Metal cutting, chip removal, Mechanical surface refinement, Surface coating, Other component manufacturing
BENDED PARTS NITINOL, CNC-CONTROLLED
The production processes are adapted individually to specific customer requirements. The semi-finished products can be reshaped in various ways using CNC-controlled machines. In addition, shape setting for nitinol can be realized.
CNC-controlled bended parts can be implemented in various geometries and dimensions to meet customer requirements.
Materials:
• Nitinol
• Cobalt-Based-Alloys (L605, MP35N)
• Stainless Steel (316LVM, 316Ti, 316L, 304, 304L, 321, 17-7 PH)
• Tantalum
CNC-controlled bended parts can be implemented in various geometries and dimensions to meet customer requirements.
Materials:
• Nitinol
• Cobalt-Based-Alloys (L605, MP35N)
• Stainless Steel (316LVM, 316Ti, 316L, 304, 304L, 321, 17-7 PH)
• Tantalum
Company news
Date
Topic
12 Nov 2020
EUROFLEX CONTINUOUSLY ELECTRO-POLISHED NITINOL WIRES FOR OPTIMAL SURFACE FINISH
At EUROFLEX, we are able to refine the surface of our products using various refinement technologies, including electro-polishing.
Our electro-polished wires show maximum surface quality resulting in:
- High corrosion resistance
- High biocompatibility
- High fatigue resistance
- Bright, smooth surface
The wire surface is smoothened and cleaned via electrochemical ablation using our reel-to-reel state-of-the-art electro-polishing process.
With the in-house designed continuous electro-polishing process the wires automatically result in low through-put times and thus are a cost-effective alternative to e-polishing processes based on piece goods.
This process makes our Nitinol wires the go-to material for medical devices which require especially smooth and clean surfaces!
Possible applications of our electro-polished Nitinol wires are:
- Neurovascular applications
- orthopedic devices
- braided stents
Our electro-polished wires show maximum surface quality resulting in:
- High corrosion resistance
- High biocompatibility
- High fatigue resistance
- Bright, smooth surface
The wire surface is smoothened and cleaned via electrochemical ablation using our reel-to-reel state-of-the-art electro-polishing process.
With the in-house designed continuous electro-polishing process the wires automatically result in low through-put times and thus are a cost-effective alternative to e-polishing processes based on piece goods.
This process makes our Nitinol wires the go-to material for medical devices which require especially smooth and clean surfaces!
Possible applications of our electro-polished Nitinol wires are:
- Neurovascular applications
- orthopedic devices
- braided stents
11 Nov 2020
NEXT GENERATION NITINOL COMPONENTS MADE FROM CONTINUOUSLY ROLLED SHEET
EUROFLEX supplies continuously rolled sheet and also components manufactured from sheet i.e. by Lasercutting, shape-setting and combined with a wide range of surface processes like chemical etching and/or electro-polishing. Components could selectively be gold plated i.e. for electrical connections or improved radiopacity.
21 Oct 2020
COMPONENTS FOR MEDICAL APPLICATIONS EN ISO 13485
EUROFLEX offers customers our expanded line of medical components and new, custom designed solutions beyond our semi-finished product selection of wire, tubing and profile (shaped) tubing. EUROFLEX offers a wide range of manufacturing processes and surface treatment options to create unique components with features including shape-forming, turned and milled parts, and laser-processed parts. Our manufacturing processes can also be tailored to customer needs. Quality and high precision are always our top priority.
About us
Company portrait
EUROFLEX GmbH offers high-grade semi-finished products and components from a variety of materials. As a leading specialist for solutions made from NITINOL and many other innovative materials, like Stainless Steel, Cobalt-based Alloys, Titanium-based Alloys, Tantalum, Platinum Alloys or Material Compounds, EUROFLEX is the competent partner for many companies in the field of medical technology.
Many years of experience in the metallurgy, the special features of the materials as well as the requirements of medical technology are the basis for continuous expansion of the EUROFLEX product range. Fast sample production, customer support from the sample to serial production as well as extensive analysis and investigation methods are part of the services of the company.
We are your strategic partners helping you to create solutions.
Materials:
Nitinol ASTM F2633
HCF
L605 ASTM F90
MP35N ASTM F562
316L ASTM F138 1.4404
Titan-Grade 2 ASTM F67
Tantal ASTM F560
Platin
Products:
Tubing
Wires
Flat-rolled sheets
Components
- Material composites / composite materials
- electropolishing
- surface technology
- coating
- 3D forming (CNC controlled)
- Nitinol shape setting
- EDM, abrasive cutting
- Laser processing (welding, cutting, engraving)
- turning and milling (CNC-controlled)
- punching, bending, deep drawing, crimping and joining
Many years of experience in the metallurgy, the special features of the materials as well as the requirements of medical technology are the basis for continuous expansion of the EUROFLEX product range. Fast sample production, customer support from the sample to serial production as well as extensive analysis and investigation methods are part of the services of the company.
We are your strategic partners helping you to create solutions.
Materials:
Nitinol ASTM F2633
HCF
L605 ASTM F90
MP35N ASTM F562
316L ASTM F138 1.4404
Titan-Grade 2 ASTM F67
Tantal ASTM F560
Platin
Products:
Tubing
Wires
Flat-rolled sheets
Components
- Material composites / composite materials
- electropolishing
- surface technology
- coating
- 3D forming (CNC controlled)
- Nitinol shape setting
- EDM, abrasive cutting
- Laser processing (welding, cutting, engraving)
- turning and milling (CNC-controlled)
- punching, bending, deep drawing, crimping and joining
Company data
Foundation
1993
