Naton Medical Group Co. Ltd. of Beijing at MEDICA 2020 in Düsseldorf -- COMPAMED Trade Fair
Manage stand orders
Select Option

Naton Medical Group Co. Ltd.

No.9 Chengwan Street, Naton Headquarters Haidian Disktrict, Beijing, 100094 Beijing
China

Submit your contact details

Provide your contact details to the exhibitor. Optionally, you may also add a personal message.

Please log in

You must be logged in to send the contact request.

An error has occurred

Please check your internet connection or try again later.

Message has been sent

Your message to the exhibitor was sent successfully.

Contact

Angelia Qu

Phone
86-0-15901372544

Email
angelica.q@natongroup.com

Maxine Wang

Phone
491733299236

Email
maxine.w@natongroup.com

Lyuba Sun

Peter Bockmüller

Phone
+49 7461 9336 663

Email
peter.bockmueller@briconmedical.com

Our products

Product category: Orthopaedic implants and prostheses

PLATINUM Occipito-Cervico-Thoracic Spinal Fixation System

Features:
  •  Triple screw fixation to the thickest point of occipital ridge through the inverted Y-plate provides rigid fixation, while the small straight plate provides additional strength.
  •  135° pre-bent rod reconstructs the cervical curve, supported by a thickened bending area (φ3.5/φ4.5/φ3.5)。
  •  Favored angle polyaxial screw (medial/lateral 45°) makes intra-operative rod loading easily. The universal self-loading design prevents slope of screw head.
Indications:
  •  Degenerative Cervical Disc
  •  Cervical Stenosis
  •  Axial Fracture with Instability
  •  Cervical Tumors
  •  Cervical Spondylolisthesis
  •  Cervical Fracture
  •  Occipitocervical Dislocation
  •  Rivision of Previous Cervical Spine Surgery

More Less

Product category: Orthopaedic implants and prostheses

PLATINUM 5.5 Thoracolumbar Fixation System (NS2)

Features:
  • Anodic oxidation surface
  • Double-thread design for fast insertion
  • Square thread closure for innie easy insertion
  • Tapered screw tip design for bi-cortical fixation
Indications:
  • Protrusion of thoracolumbar intervertebral disc
  • Thoracolumbar vertebral instability
  • Thoracolumbar tumor
  • Thoracolumbar canal stenosis
  • Thoracolumbar vertebral fractures
  • Thoracolumbar tuberculosis

More Less

Product category: Orthopaedic implants and prostheses

MIS Plus Thoracolumbar Spine Fixation System

Features:
  • · Round groove on both sides are used to connect the reduction forceps.
  • · Extension break-off tap length is 80 cm, which protrudes from skin and simplifies matching instruments.
  • · Optional bone cement holes design may provide stronger fixation for the patients with osteoporosis.
  • · Increases the inner width of U-shaped extension tap, easy for rod insertion.
  • · Reverse angle thread design avoids tap break-off and thread damaging.

Indications:
  • · Thoracolumbar Spine Tumors
  • · Thoracolumbar Degenerative Disc Disease
  • · Thoracolumbar Fractures
  • · Thoracolumbar Revision Surgery
  • · Thoracolumbar Deformity

More Less

Product category: Orthopaedic implants and prostheses

KYLIN Cranio Maxillofacial System

KYLIN Introduction
KYLIN is a plating system for internal fixation of cranio-maxillofacial fractures – addressing midface, mandibular and orthognathic surgery.
KYLIN is a comprehensive system that offers solutions with flexibility, ease of use and implants and instruments of high quality.
- Free combination of plates and screws within each KYLIN system
- Lower Plate/screw profle
- Standardized instrumentation
- Blunt edges on plates for less irritation to soft tissue
- Simplifed instrument combination and applicable to more indications


KYLIN Midface System
Features:
· One screw diameter fts all plates.
· One system applicable to all midface trauma indications.
Indications:
·Trauma repair and reconstruction of the craniofacial skeleton

KYLIN Midface Orbital plates
Plates are made of imported pure titanium.
Plates include anatomic orbital floor plates and orbital floor mesh plates

KYLIN Midface Fixation plates
Plates are made of imported commercial pure titanium.
Plates with full specifcations, are applicable to NOE, ZMC, LeFort I and other cranial-maxillofacial indications.

KYLIN Midface Screws
Three types of screws are available, including "self-tapping screw", "self-drilling screw" and "selftapping and self-drilling screw".
Screws are made of titanium alloy (Ti-6Al-4V).
Screws are available with full size.
A fine pitch* of 0.6mm enables faster implantation.

 
*Pitch: the distance from the crest of one thread to the next.

More Less

Product category: Orthopaedic implants and prostheses

Foot&Ankle Variable Angel Locking Plate System

Variable angle screw holes allow up to 15° off-axis screw angulation in all directions
Enlongated slot on plate shaft allows easy compression and preliminary fixation
Low profile design to reduce the risk of soft tissue irritations
Made of TC20 material

More Less

Product category: Orthopaedic implants and prostheses

Unique Knee System

Prosthesis fits with anatomy
Smooth surface reduces wear
Models match multiple choices


Features:
· Optimized design of Postcam can better solve mid-fixation instabiity
· Maximum osteotomy angle for minimum intercondylar osteotomy
· Extremely thin anterior surface ensures high-riding patella to slide in
· Excellent patella track design fits patelloplasty better
· Robust cam ensure function strength
· Deeper sub-patella profile design for higher flexion
· Strong back lock design prevent displacement
· Adjustable tibia stem to prevent stress concentration
· Mirror polished platform keeps inserter as good as new
· Optimal curvature design reduces interface wear
· Flexible detachable stem satisfy patients of different bone quality

More Less

Product category: Orthopaedic implants and prostheses

Anterior Cervical Plate System III

Features
· Unique cam design effectively increases contact area with screws.
· Bone screw with varied angle allows a variable angle range of 20° for easy operation.
· Large window design for bone grafting provides clear view for operation. The design realizes easy grafting as well as perfect placement for titanium plate.


Indication
· Degenerative cervical spine lesions.
· Cervical spine fracture with cervical instability.
· Cervical spondylopathy and tumor.
· Reconstruction of cervical spine based on previous surgery.

More Less

Product category: Orthopaedic implants and prostheses

TITAN 5.5mm Thoracolumbar Fixation System

Features:
· Break-off innie screw ensures easier insertion and precise torque control.
· Reverse-angle thread locking mechanism of innie screw prevents screw tail expansion, and ensures security of final tightening.
· Dual-thread design of screw shaft provides stronger fixation. Thread extends to screw tip, making bicortical fixation possible.
· Laser-marked indication line on the rod gives clear reference during in-situ rod bending or rotating.


Indications:
· Degenerative disc disease
· Spinal fracture
· Revision surgery
· Deformity

More Less

Product category: Orthopaedic implants and prostheses

Thoracic&Lumbar Interbody Fusion Cage System

Superior Biocompatibility
Anatomical shaped Design
Diverse Surgical Approaches

More Less

Product category: Orthopaedic implants and prostheses

DIAMOND Knee System

Features:
· The curvature radius of femoral prosthesis is in line with human anatomy.
· Optimize the patella trace by lengthening frong wing.
· Four patella models meet clinical needs.
· The optimized split buckle design improves the performance by 85 percentage comparing to the traditional integrated design.
· Excellent locking structure ensures good stability between Insert and Component.


Indications:
· Knee joint severly pain caused by osteoarthritis, traumatic arthritis, rheumatoid arthritis or a failed previous implant.
· Deformity or limitation of movements caused by osteoarthritis, rheumatoid arthritis and osteonecrosis.
· Certain types of post-traumatic arthritis which severly affects patients' quality of life.

More Less

Product category: Orthopaedic implants and prostheses

NAVIGATOR AFN Nail

Features:
· Controllable intraoperative compression
· Anatomical bend design for easy insertion and extraction
· Groove on nail allows easy insertion and helps maintain reduction
· Multiplanar locking screws provide better anti-rotation stability of distal fragment


Indications:
Standard Locking
· Femoral shaft fracture (Except subtrochanteric fractures 32-A [1-3].1, 32-B [1-3].1, and 32-C [1-3].1)


Recon Locking
· Femoral shaft fracture combined with femoral neck fractures: 32-A/B/C combined with 31-B (double ipsilateral)
· Subtrochanteric fractures: 32-A [1-3].1, 32-B [1-3].1 and 32-C [1-3].1

More Less

Product category: Orthopaedic implants and prostheses

NAVIGATOR DSN Nail

Double screws design makes integrated screws threaded together to provide better compression and eliminate Z effect. 
Elongated hole in the distal end procides static and dynamic locking options. 
The trapezoidal shape in the proximal end brngs a better rotational stability. 
The pre-implanted compression bold inside the nail can be tightened to reduce migration of the lag screw. 
the tuning fork shaped distal tio helps decrease the stress concentration so as to reduce pain and prevent fracture. 

More Less

Product category: Orthopaedic implants and prostheses

NAVIGATOR PFA Nail

Features:
· PFA blade can be easily inserted and locked through a small lateral incision.
· Anatomical intramedullary ail refers to femur anatomy structure.
· Single locking implant inside femoral neck achieves both optimal anti-rotation and stabilization


Indications:
·  Pathologic fracture
· High subtrochanteric fracture
· Low and extended subtrochanteric fracture
· Combined fracture (proximal femur/femur shaft)
· Intertrochanteric fracture (31-A1 & 31-A2)
· Reverse intertrochanteric fracture (31-A3)

More Less

Product category: Orthopaedic implants and prostheses

NAVIGATOR Tibia Nail

Features:
· Fully threaded interlocking screws can improve bone holding strength ability.
· Wider screw core diameter for better mechanical resistance.
· 5.0mm dual-core locking screw for optimized fixation of cancellous bone.
· Optimized anatomic bend design for easy nail insertion.
· Titanium alloy for better mechanical and fatigue properties.
· Distal ML&AP locking options can prevent soft tissue damage and increase stability of the distal fragment.


Indications:
· Proximal, distal tibia and tibial shaft stable fracture
· Open and closed tibial shaft fracture
· Tibial malunions and nonunions

More Less

Product category: Orthopaedic implants and prostheses

DIAMOND Ti Femoral Stem

Features:
· Polished neck design reduces debris generation from impingement.
· Tapered geometry of the proximal stem achieves good initial stability, anatomical medial curvature of the stem provides optimal fit with the medullary cavity.
· Plasma-spray finish of the proximal stem surface enhances bone ingrowth.
· Grit blasted surface of the diaphyseal region provides best anti-rotation.
· High-polished and bullet design of the distal end effectively reduces post-generation thigh pain.

Indications:
· Femoral neck fracture
· Ankylosing spondylitis
· Rheumatoid arthritis
· Femoral head osteonecrosis
· Osteoarthritis
· Developmental dysplasia of hip

More Less

Product category: Orthopaedic implants and prostheses

DIAMOND Co-Cr-Mo Femoral Stem

Features:
· Large collar support achieves reintroduction of physiological into the femur and prevents stem subsidence.
· 130° CCD to restore the anatomic neck-shaft angle.
·Cement fixation for better initial stability.
· Co-Cr-Mo Alloy, ideal for long-term cemented implants.
· Four different stem lengths for optimal adaptation to individual situations.
· Distal centralizer ensures that the stem can be placed in the axis of femur cavity.


Indications:
· Femoral neck fracture
· Ankylosing spondylitis
· Rheumatoid arthritis
· Femoral head osteonecrosis
· Osteoarthritis
· Developmental dysplasia of the hip

More Less

Product category: Orthopaedic implants and prostheses

OPTIMA & OPTIMA-R High Polished Cemented Femoral

Features: 
· Depth laser-maker is better for observation and adjustment during operation.
· Curved design is easy for implantation and reduces the risk of surgery.
· Dual tapered design increase antirotation stabiliztion.
· High-polished surface helps to reduce friction.
· Distal centralizer prevents stem tilting in the cavity.


Indicatons:
· Femoral neck fracture
· Femoral head osteonecrosis
· Ankylosing spondylitis
· Development dysplasia of the hip
· Rheumatoid arthritis
· Primary & revision hip surgery
· Osteoarthritis 

More Less

Product category: Orthopaedic implants and prostheses

OPTIMUS Cementless Femoral Stem

Various specifications are available for primary and revision hip surgeries, especially for proximal bone defect.
Eight longitudinal ribs with relatively sharp ridge provide additional rotational stability and allow for intraoperative anteversion adjustment. 
2° tapered geometry reduces the incidence of thigh pain. 
Titanium alloy with a grit-blasted surface for cementless fixation in femoral revision surgery. 

More Less

Product category: Orthopaedic implants and prostheses

OPTIMA Cementless Femoral Stem

Features:
· Polished neck designed to generated less wear debris secondary to prosthetic impingment.
· Double tapper design fits most femoral canal anatomy and preserves more bone stock for revision.
· Stepped geometry of the stem surface minimize shear forces and maximize compression loading in host cancellous bone.
· Proximal rectangular cross section and distal round with flute cross section increase antirotation ability.


Indications:
· Femoral neck fracture
· Rheumatoid arthritis
· Osteoarthritis
· Ankylosing spondylitis
· Femoral head osteonecrosis
· Post-traumatic arthritis

More Less

Product category: Orthopaedic implants and prostheses

Lotu Cementless Acetabular Cup

Allow the maximum fault-tolerant rate ±13° of screw angulation
Utilizes the Ti plasma spray coating technology to achieve a better initial stability of implant
Unique locking mechanism - Crown Cap provides a superior anti-rotation capacity
Multipla material choices of liner and head

More Less

Product category: Orthopaedic implants and prostheses

3.5mm Multi-Dimensional Cross Locking Plate

Screws are locked at 30° angle to the plate
Double screw hole in each row allows more bi-cortical fixation near the fracture line on both sides of the intramedullary nail
Plaed on the anterior side 
Anatomical design to reduce the time of pre-contouring

Indication
Non-union on femoral shaft after intramedullary nail implantation

More Less

Product category: Orthopaedic implants and prostheses

Elastic Nail

Feature:
· 6 nail diameters(1.5, 2.0, 2.5, 3.0, 3.5,4.0mm) for various indications
· Curved nail tip allows easy reduction and insertion
· Laser marking line allows visual control of the alignment of the nail in the canal

 
Indication:
· For pediatric patients: Diaphyseal and certain metaphyseal or epiphyseal fractures of long bones
· For adult patients: Clavicle fractures; Forearm fractures; Fibula fractures.

More Less

Product category: Orthopaedic implants and prostheses

Distal Radius and Ulna Plate

Locking Plate System and VA Locking Plate System
2.4/2.7mm VA Distal Radius Two-Column Volar Locking Plate, Narrow
2.4/2.7mm VA Distal Radius Two-Column Volar Locking Plate, Standard
2.4/2.7mm VA Distal Radius Two-Column Volar Locking Plate, Board
2.4/2.7mm VA Distal Radius Volar Rim Locking Plate(New Launched)
2.4mm VA Distal Radius Dorsal Locking L Plate
2.4mm VA Distal Radius Dorsal Locking T Plate
2.4mm VA Distal Radius Dorsal Locking Oblique L Plate
2.4mm VA Distal Radius Dorsal Radial Column Locking Straight Plate
2.4mm VA Distal Radius Dorsal Intermediate Column Locking L Plate
2.4mm Straight Dorsal Locking Plate
2.4mm Distal Radius Dorsal Locking L-Plate
2.4mm Distal Radius Dorsal Locking Oblique L-Plate
2.4/2.7mm Distal Radius Extra-articular Volar Locking T-Plate
2.4/2.7mm Distal Radius Juxta-articular Volar Locking T-Plate
2.4mm Distal Radius Dorsal Locking T-Plate
2.4/2.7mm Distal Radius Volar Column Locking Plate
2.0mm Distal Ulna Hook Locking Plate(New Launched)

 

Indication
· Fractures and corrective osteotomies of the distal radius;
· Fractures of the distal ulna (2.0mm Distal Ulna Hook Locking Plate)

More Less

Product category: Orthopaedic implants and prostheses

Catalog - Cannulated Screw System

Catalog - Cannulated Screw System

More Less

Product category: Orthopaedic implants and prostheses

Catalog - Cranio Maxillofacial System

Catalog - Cranio Maxillofacial System

More Less

Product category: Orthopaedic implants and prostheses

Catalog - Extremities

Catalog - Extremities

More Less

Product category: Orthopaedic implants and prostheses

Catalog - Intramedullary Nail System

Catalog - Intramedullary Nail System

More Less

Product category: Orthopaedic implants and prostheses

Catalog - Joint Reconstruction System

Catalog - Joint Reconstruction System

More Less

Product category: Orthopaedic implants and prostheses

Catalog - Locking Plate System

Catalog - Locking Plate System

More Less

Product category: Orthopaedic implants and prostheses

Catalog - Non locking Plates System

Catalog - Non locking Plates System

More Less

Product category: Orthopaedic implants and prostheses

Catalog - Spine System

Catalog - Spine System

More Less

Product category: Orthopaedic implants and prostheses

Catelog - Face Mask

Catelog - Face Mask

More Less

Company news

Date

Topic

Download

Nov 12, 2020

Announcing CE Mark—IRENE Hip Joint Products

IRENE is delighted to announce that all hip joint products have received CE certificate, which means that IRENE hip joint products comply with relevant standards and regulations of EU, and have been approved for sale in the European market.
IRENE has passed the CE Certificate with “zero non-conformance term”, which not only represents IRENE’s strong technical strength and excellent quality, but also lays a solid foundation for taking further steps in the international market.
We will take this opportunity to embark on a new journey in the orthopedic field worldwide.

More Less

About us

Company details

MISSION
Lead the progress of medical science and technology
Promote the development of medical industry
Help patients overcome disease and back to health at minimum cost


VISION
Be a reputed medical leader in healthcare area
Be a respected and yearning enterprise

COMPANY PROFILE
Tianjian Zhengtian Medical Instrument Co.,Ltd (with the brand name IRENE) was founded in 1995 and acquired by NATON since 2007. By far Zhengtian has 24 years’ experience in orthopedic industry and become the largest orthopedic enterprise in China. IRENE offers comprehensive solution and superior services in the professional field of trauma, spine, joint reconstruction, CMF, sports medicine and 3D printed products.

Zhengtian plant is located in the port city Tianjin. It presently covers an area of 35000 m² with 608 processing equipment, 800 m² 100,000 class aseptic packaging room and 10,000 class aseptic followed GMP regulation. Zhengtian also puts emphasis on the construction of enterprise management system and has built a well-rounded quality system guided by ISO9001-2000 and YY/T0287-2003 standards. The quality control is strictly from raw material to each producing system. It also applies ERP system to collect the products’ feedback in time. Moreover, Zhengtian continuously focuses on R&D and has owned over 100 domestic patents so far.

To guarantee quality and efficiency, Zhengtian Medical has invested and imported several high-end medical equipment production lines and equipment from Germany, Switzerland and other countries. By 2018, the output value reached over 100 million USD. The average growth rate over the past three years is 32%. In the global market, IRENE products have covered more than 100 countries in Europe, Latin America, Asia, Middle East and Africa. Moreover, it is worth mentioning that the export volume of joint products rank first among all China orthopedic enterprises.

Zhengtian is committed to the development of global orthopedic industry. Over the past five years, IRENE has invited more than 500 global surgeons to visit China top hospitals to conduct academic exchange and collaborated with first-rate surgeons to disseminate advanced surgical techniques and knowledge abroad under the name of NATON ACADEMY. IRENE and NATON has also sponsored and attained more than 40 international and reginal orthopedic professional conferences annually.

More Less

Company information as a PDF file