Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
MAVIG GmbH
Postfach 820362,
81803
München
Stahlgruberring 5, 81829 München
Germany
Stahlgruberring 5, 81829 München
Germany
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
Contact
Our range of products
Product categories
- 01 Electromedical equipment / medical technology
- 01.02 Imaging supplies
- 01.02.03 X-ray devices and accessories
X-ray devices and accessories
- MAVIG RA631-Vest & Skirt for Allround Protection
- MAVIG RA632 - Coat for Allround Protection
- MAVIG EXTENDED RA641- Apron for Front Protection in any Working Position
- MAVIG RA614 - Thyroid Gland and Sternum Protection
- MAVIG RA Brygga® - Shoulder Weight Relief for X-Ray-Apron Users
- MAVIG HS100 - Sterile X-Ray Protective Gloves
- MAVIG BR126 - X-Ray Protective Glasses with side radiation protection
- MAVIG BR330 - Dosemetry & X-Ray Protective Glasses
- MAVIG-Hybrid Central Axis - Far Reaching Ceiling Suspension
- MAVIG OT54001 - Lead Acrylic X-Ray Protective Shield
- MAVIG UT70 - Modular Lower Body X-Ray Protection
- MAVIG WD261 - Radiation Protective Mobile Shield
- MAVIG Portegra2 - Ceiling Suspension System
- MAVIG WD204 - Mobile X-Ray Protective Shield
- 01 Electromedical equipment / medical technology
- 01.08 Operating technology and operating equipment
- 01.08.01 Surgery room equipment
Surgery room equipment
- MAVIG-Hybrid Central Axis - Far Reaching Ceiling Suspension
- MAVIG OT54001 - Lead Acrylic X-Ray Protective Shield
- MAVIG UT70 - Modular Lower Body X-Ray Protection
- MAVIG WD261 - Radiation Protective Mobile Shield
- MAVIG GD60 - Heavy Load Monitor Suspension System
- MAVIG Portegra2 - Ceiling Suspension System
- MAVIG WD204 - Mobile X-Ray Protective Shield
- VivaScope® 2500 – Ex Vivo / Instant Digital Pathology - Confocal Laser Scanning Microscopy
- VivaScope® 1500/3000 - IN VIVO Confocal Laser Scanning Microscope (830 nm)
- 01 Electromedical equipment / medical technology
- 01.08 Operating technology and operating equipment
- 01.08.02 Surgical lights, booms
Surgical lights, booms
Our products
Product category: X-ray devices and accessories
MAVIG RA631-Vest & Skirt for Allround Protection
Allround optimum x-ray protection! The patented Balance RA631 series sees you through a safe and comfortable day with its great weight distribution and a high degree of movement and flexibility.
• Significantly reduced weight burden on the spinal column
• The two piece model allows better ventilation of body heat
• Shoulder pads as standard equipment
• Meets all relevant regulations and requirements
• Complies with the specifications of DIN EN ISO 13795-1 for surgical textiles
• Biocompatible, phthalate-free radiation protection materials (lead components can be recycled)
Allround optimum protection! The patented Balance RA631 series sees you through a safe and comfortable day. Its special features differentiate this model significantly from other two-piece models.
Fully overlapping front panels achieve lead equivalent values of Pb 0.25 mm, Pb 0.35 mm, or 0.50 mm for the front and create the basis for the incredible wearing comfort of the Balance series, with its great weight distribution and a high degree of movement and flexibility.
The integrated, colour-contrast safety zones (ocean) guarantee ideal X-ray protection. They will give you the certainty of being optimally protected in all situations. In the side area, the vest and skirt each have an ample 12 cm wide double layer with the full lead equivalent. This is also the case in the sections of the shoulder area where the cut is designed as non-overlapping. If the end of the front panel is within this clearly recognizable zone after putting on the protective clothing, you are covering the full 60% of the body circumference with the maximum protective value.
The skirt has a wide belt strap in addition to the high-quality hook & burr fastener. An elastic insert in the back part allows the user to hold his/her posture and can be easily replaced if necessary, thanks to a zipper. The upper width of the skirt can be varied by changing the size of the insert.
For additional relief of the weight loaded onto the shoulder area, this model can be combined with the RA Brygga® shoulder bridge.
• Significantly reduced weight burden on the spinal column
• The two piece model allows better ventilation of body heat
• Shoulder pads as standard equipment
• Meets all relevant regulations and requirements
• Complies with the specifications of DIN EN ISO 13795-1 for surgical textiles
• Biocompatible, phthalate-free radiation protection materials (lead components can be recycled)
Allround optimum protection! The patented Balance RA631 series sees you through a safe and comfortable day. Its special features differentiate this model significantly from other two-piece models.
Fully overlapping front panels achieve lead equivalent values of Pb 0.25 mm, Pb 0.35 mm, or 0.50 mm for the front and create the basis for the incredible wearing comfort of the Balance series, with its great weight distribution and a high degree of movement and flexibility.
The integrated, colour-contrast safety zones (ocean) guarantee ideal X-ray protection. They will give you the certainty of being optimally protected in all situations. In the side area, the vest and skirt each have an ample 12 cm wide double layer with the full lead equivalent. This is also the case in the sections of the shoulder area where the cut is designed as non-overlapping. If the end of the front panel is within this clearly recognizable zone after putting on the protective clothing, you are covering the full 60% of the body circumference with the maximum protective value.
The skirt has a wide belt strap in addition to the high-quality hook & burr fastener. An elastic insert in the back part allows the user to hold his/her posture and can be easily replaced if necessary, thanks to a zipper. The upper width of the skirt can be varied by changing the size of the insert.
For additional relief of the weight loaded onto the shoulder area, this model can be combined with the RA Brygga® shoulder bridge.
Product category: X-ray devices and accessories
MAVIG RA632 - Coat for Allround Protection
This patented X-ray protection coat achieves outstanding ratings in terms of weight and radiation protection, allowing you to tackle your daily work without stress. Safety, freedom of movement and back relief were the focus during its development.
• Reduction of the weight burden on the spinal column due the elastic belt
• Easy to put on due to hook & burr fastener at chest hight
• Shoulder pads as standard equipment
• Meets all relevant regulations and requirements
• Complies with the specifications of DIN EN ISO 13795-1 for surgical textiles
• Biocompatible, phthalate-free radiation protection materials (lead components can be recycled)
Heavy allround protection models lead to a considerable physical load on the user. This problem could be solved with the development of this X-ray protection coat - the patented Synergy RA632 series.
This special user comfort also includes being able to put on the apron comfortably and easily. The coat is simply closed at the chest with a hook & burr fastener and fits properly without any fuss.
An elastic belt (included) provides shoulder relief without any uncomfortable restriction. The variable snap fasteners strip permits each user to adjust the belt to his or her individual waist height. The belt can be buttoned onto the coat on one side or both sides. In the bottom area, the coat is also secured with a snap buckle fastener.
For additional relief of the weight loaded onto the shoulder area, this model can be combined with the RA Brygga® shoulder bridge.
• Reduction of the weight burden on the spinal column due the elastic belt
• Easy to put on due to hook & burr fastener at chest hight
• Shoulder pads as standard equipment
• Meets all relevant regulations and requirements
• Complies with the specifications of DIN EN ISO 13795-1 for surgical textiles
• Biocompatible, phthalate-free radiation protection materials (lead components can be recycled)
Heavy allround protection models lead to a considerable physical load on the user. This problem could be solved with the development of this X-ray protection coat - the patented Synergy RA632 series.
This special user comfort also includes being able to put on the apron comfortably and easily. The coat is simply closed at the chest with a hook & burr fastener and fits properly without any fuss.
An elastic belt (included) provides shoulder relief without any uncomfortable restriction. The variable snap fasteners strip permits each user to adjust the belt to his or her individual waist height. The belt can be buttoned onto the coat on one side or both sides. In the bottom area, the coat is also secured with a snap buckle fastener.
For additional relief of the weight loaded onto the shoulder area, this model can be combined with the RA Brygga® shoulder bridge.
Product category: X-ray devices and accessories
MAVIG EXTENDED RA641- Apron for Front Protection in any Working Position
Up-to-date user protection for multiple applications, which can also be carried out sitting down. Ideal radiation protection in any working position.
•Elastic belt to relieve the weight from the shoulders
•Removable gonad protection for weight reduction when standing
•Meets all relevant regulations and requirements
•Complies with the specifications of DIN EN ISO 13795-1 for surgical textiles
•Biocompatible, phthalate-free radiation protection materials (lead components can be recycled)
For this purpose, a special gonad protector is attached on the inside of the apron. When sitting in front of a patient, facing forward, this protector hangs down protectively in front of the gonads, while the apron lies on the legs.
At the same time, the new design prevents the apron from slipping down the legs and exposing them. The larger side pieces in the lower part keep the apron in position during any movement.
When you are standing, the RA641 also guarantees complete X-ray protection from neck to knees. Here, the side flaps of the lower part of the apron can simply be fastened together in the back, so that they do not interfere with any movements allowing unrestricted work.
•Elastic belt to relieve the weight from the shoulders
•Removable gonad protection for weight reduction when standing
•Meets all relevant regulations and requirements
•Complies with the specifications of DIN EN ISO 13795-1 for surgical textiles
•Biocompatible, phthalate-free radiation protection materials (lead components can be recycled)
For this purpose, a special gonad protector is attached on the inside of the apron. When sitting in front of a patient, facing forward, this protector hangs down protectively in front of the gonads, while the apron lies on the legs.
At the same time, the new design prevents the apron from slipping down the legs and exposing them. The larger side pieces in the lower part keep the apron in position during any movement.
When you are standing, the RA641 also guarantees complete X-ray protection from neck to knees. Here, the side flaps of the lower part of the apron can simply be fastened together in the back, so that they do not interfere with any movements allowing unrestricted work.
Product category: X-ray devices and accessories
MAVIG RA614 - Thyroid Gland and Sternum Protection
Thyroid and sternum protector with snap fasteners for a secure attachment to he whole range of MAVIG protective clothing.
•Available with exchangeable hook & burr fastener or magnetic closure
•Snap Fasteners for a secure attachment to the X-Ray protective clothing
•Meets all relevant regulations and requirements•
•Complies with the specifications of DIN EN ISO 13795-1 for surgical textiles
•Biocompatible, phthalate-free radiation protection materials (lead components can be recycled)
The thyroid is a radiation-sensitive organ of the human body and therefore in particular need of protection. Wearing appropriate protection during dose-intensive examinations should therefore always be a matter of course.
Our thyroid and sternum protector is characterised by its first-class cut and the best fit, taking into account all aspects of radiation protection.
With a permanently sewn-on hook & burr closure in the neck as standard, the thyroid and sternum protection is optionally also available with an exchangeable hook & burr closure or a practical magnetic closure.(not available in USA, Canada and Japan)
•Available with exchangeable hook & burr fastener or magnetic closure
•Snap Fasteners for a secure attachment to the X-Ray protective clothing
•Meets all relevant regulations and requirements•
•Complies with the specifications of DIN EN ISO 13795-1 for surgical textiles
•Biocompatible, phthalate-free radiation protection materials (lead components can be recycled)
The thyroid is a radiation-sensitive organ of the human body and therefore in particular need of protection. Wearing appropriate protection during dose-intensive examinations should therefore always be a matter of course.
Our thyroid and sternum protector is characterised by its first-class cut and the best fit, taking into account all aspects of radiation protection.
With a permanently sewn-on hook & burr closure in the neck as standard, the thyroid and sternum protection is optionally also available with an exchangeable hook & burr closure or a practical magnetic closure.(not available in USA, Canada and Japan)
Product category: X-ray devices and accessories
MAVIG RA Brygga® - Shoulder Weight Relief for X-Ray-Apron Users
Wearing the patented BRYGGA shoulder bridge underneath the X-ray apron is an easy-to-use and very efficient method of reducing physical strain and muscular fatigue.
•Full freedom of movement of the neck and arms
•Reduction of the weight load on the shoulders
•Promotes an ergonomically correct posture
•Patented solution
•Recommended for use with MAVIG apron models RA631 and RA632
•Does not hinder the user or interfere with procedures
•Greatly reduces the risk of tension headache and numbness of the arms
•Easy cleaning ( just wipe off with any cleaning agent)
•Available in sizes S/M and L
•Simple adjustment
•Very comfortable
•Outer material 100% durable carbon fiber
•Padding foam: Outside – Evazote, density 50 / Inside – Polyethylene, density 70
•Full freedom of movement of the neck and arms
•Reduction of the weight load on the shoulders
•Promotes an ergonomically correct posture
•Patented solution
•Recommended for use with MAVIG apron models RA631 and RA632
•Does not hinder the user or interfere with procedures
•Greatly reduces the risk of tension headache and numbness of the arms
•Easy cleaning ( just wipe off with any cleaning agent)
•Available in sizes S/M and L
•Simple adjustment
•Very comfortable
•Outer material 100% durable carbon fiber
•Padding foam: Outside – Evazote, density 50 / Inside – Polyethylene, density 70
Product category: X-ray devices and accessories
MAVIG HS100 - Sterile X-Ray Protective Gloves
Sterile protective gloves from MAVIG for the use against scattered X-ray radiation allow optimization of the X-ray protective measured for medical staff. The development of these gloves has achieved an effective solution to traditional contradictory properties.
•Great shielding and protection against scattered radiation
•Great elasticity
•Great sensitivity
Drastically lowering the equivalent radiation exposure for medical personal is a must, and not just to the permissible levels of the effective dose. The concept of optimization in radiation protection specifies that every possible measure must be taken to minimize the dosage from radiation exposure.
With the the X-ray absorbing, sterile gloves HS100 MAVIG offers personal protection equipment in accordance to the guideline 89/686/EWG, which serves the purpose of protecting from secondary X-ray radiation. (Conformity: DIN EN 61331-1:2016 / IEC 61331-1:2014)
Worthy to note is that a protective factor of 2 is achieved when using the gloves in the scattered radiation area (X-ray tube voltage of 60 – 80 kV). This dose reduction of >50% helps in effectively minimizing risks.
Excellent product characteristics and the optimized fit easily provide a better protection.
•Great shielding and protection against scattered radiation
•Great elasticity
•Great sensitivity
Drastically lowering the equivalent radiation exposure for medical personal is a must, and not just to the permissible levels of the effective dose. The concept of optimization in radiation protection specifies that every possible measure must be taken to minimize the dosage from radiation exposure.
With the the X-ray absorbing, sterile gloves HS100 MAVIG offers personal protection equipment in accordance to the guideline 89/686/EWG, which serves the purpose of protecting from secondary X-ray radiation. (Conformity: DIN EN 61331-1:2016 / IEC 61331-1:2014)
Worthy to note is that a protective factor of 2 is achieved when using the gloves in the scattered radiation area (X-ray tube voltage of 60 – 80 kV). This dose reduction of >50% helps in effectively minimizing risks.
Excellent product characteristics and the optimized fit easily provide a better protection.
Product category: X-ray devices and accessories
MAVIG BR126 - X-Ray Protective Glasses with side radiation protection
The BR126 is designed to best protect the user's eyes from scattered radiation from all angles of incidence. This requirement has been effectively addressed in the design of the glasses by means of large-area X-ray protective glazing and two side radiation protection zones that are closely connected to the front lenses.
•Optimized side radiation protection
•Standard anti-reflective coating on the lenses
•Sight-correction lenses are available as single-vision, bifocal, and progressive lenses
•Easy to clean and a high degree of chemical resistance (disinfectant resistance)
The first generation BR126 protection glasses were already equipped with adequate side protection. After the facelift, second-generation BR126 glasses have optimized side radiation protection.
Good Fit and Comfort
To ensure that the fit is optimally consistent with one’s respective facial geometry, we offer two sizes in this model range. The important performance parameter of a tight seal of the glasses against the cheekbones is perfectly implemented with the curve of the frame. The soft curves on all the components of the frame provide good, wearable comfort. We have made sure there is a wide contact surface at the nose bridge, which distributes the weight of the protection glasses over a widespread area.
Eyesight Correction
The mineral lead lenses used by us in combination with the special fit of the BR126 allow for the correction of eyesight in the single-vision as well as for bifocal and progressive lenses.
Special quality features make the glasses ideal for use in the medical field
• Frame made of high-quality plastic materials with great shape retention
• Complete avoidance of the use of plasticisers in production
• The materials used ensure the greatest possible freedom from allergens
• Easy to clean and a high degree of chemical resistance (disinfectant resistance)
• Sight-correction lenses are available as single-vision, bifocal, and progressive lenses
• Standard anti-reflective coating on the lenses
•Optimized side radiation protection
•Standard anti-reflective coating on the lenses
•Sight-correction lenses are available as single-vision, bifocal, and progressive lenses
•Easy to clean and a high degree of chemical resistance (disinfectant resistance)
The first generation BR126 protection glasses were already equipped with adequate side protection. After the facelift, second-generation BR126 glasses have optimized side radiation protection.
Good Fit and Comfort
To ensure that the fit is optimally consistent with one’s respective facial geometry, we offer two sizes in this model range. The important performance parameter of a tight seal of the glasses against the cheekbones is perfectly implemented with the curve of the frame. The soft curves on all the components of the frame provide good, wearable comfort. We have made sure there is a wide contact surface at the nose bridge, which distributes the weight of the protection glasses over a widespread area.
Eyesight Correction
The mineral lead lenses used by us in combination with the special fit of the BR126 allow for the correction of eyesight in the single-vision as well as for bifocal and progressive lenses.
Special quality features make the glasses ideal for use in the medical field
• Frame made of high-quality plastic materials with great shape retention
• Complete avoidance of the use of plasticisers in production
• The materials used ensure the greatest possible freedom from allergens
• Easy to clean and a high degree of chemical resistance (disinfectant resistance)
• Sight-correction lenses are available as single-vision, bifocal, and progressive lenses
• Standard anti-reflective coating on the lenses
Product category: X-ray devices and accessories
MAVIG BR330 - Dosemetry & X-Ray Protective Glasses
Radiation protection and eye lensdosemetry redefined. The BR330 protects the user’s eyes from scattered radiation from all angles of incidence and at the same time offers the possibility to combine dosimetry and X-Ray protective glasses.
• Gap-free radiation protection from the nose to the cheekbones
• World novelty: Patented dosemeter connection on the left, right or on both sides.
• Optical corrections are available as single-vision, bifocal, and progressive lenses
• Maximum wearing comfort through individual adjustment options
• Easy cleaning and a high degree of chemical resistance (resistance to disinfectants)
Integration of Dosemeters
In the case of monitoring the eye lens dose, a constant position of the dosemeter(s) is most ideal. Together with project partners AWST Evaluation Centre of the Helmholtz Centre and Dosilab, MAVIG has developed a new type of radiation protection glasses that integrates lens dosemetry into the approach in a beneficial way. The BR330 glasses allow the use of dosemeters due to the patented dosemeter connection on the left, right or on both sides. The dosemeter connection has been designed in such a way that there are no user restrictions and yet the best possible dosemetry is guaranteed.
Special Quality Features Optimise Use in the Medical Field
•Frame made of high-quality plastic materials with high shape stability
•Complete elimination of the use of plasticisers during production
•As hypoallergenic as possible
•Easy cleaning and a high degree of chemical resistance (resistance to disinfectants)
•Standard anti-reflective coating of the lenses
•Optical corrections are available both as single-vision, bifocal, and progressive lenses
•Lead equivalent value at 50 – 150 kV, extended front / lateral protection (weight): Pb 0.50 mm/ 0.50 mm (approx. 120 g)
Other Features
•Adjustable temple length
•Inclination adjustable (± 22,5°)
•Dosemeter mounting: none, left, right, or both sides
•Anti-reflective coating of the lenses
•Glasses strap, case, cleaning cloth
•Conformity: IEC 61331-1:2014 / IEC 61331-3:2014
• Gap-free radiation protection from the nose to the cheekbones
• World novelty: Patented dosemeter connection on the left, right or on both sides.
• Optical corrections are available as single-vision, bifocal, and progressive lenses
• Maximum wearing comfort through individual adjustment options
• Easy cleaning and a high degree of chemical resistance (resistance to disinfectants)
Integration of Dosemeters
In the case of monitoring the eye lens dose, a constant position of the dosemeter(s) is most ideal. Together with project partners AWST Evaluation Centre of the Helmholtz Centre and Dosilab, MAVIG has developed a new type of radiation protection glasses that integrates lens dosemetry into the approach in a beneficial way. The BR330 glasses allow the use of dosemeters due to the patented dosemeter connection on the left, right or on both sides. The dosemeter connection has been designed in such a way that there are no user restrictions and yet the best possible dosemetry is guaranteed.
Special Quality Features Optimise Use in the Medical Field
•Frame made of high-quality plastic materials with high shape stability
•Complete elimination of the use of plasticisers during production
•As hypoallergenic as possible
•Easy cleaning and a high degree of chemical resistance (resistance to disinfectants)
•Standard anti-reflective coating of the lenses
•Optical corrections are available both as single-vision, bifocal, and progressive lenses
•Lead equivalent value at 50 – 150 kV, extended front / lateral protection (weight): Pb 0.50 mm/ 0.50 mm (approx. 120 g)
Other Features
•Adjustable temple length
•Inclination adjustable (± 22,5°)
•Dosemeter mounting: none, left, right, or both sides
•Anti-reflective coating of the lenses
•Glasses strap, case, cleaning cloth
•Conformity: IEC 61331-1:2014 / IEC 61331-3:2014
Product category: X-ray devices and accessories, Surgery room equipment
MAVIG-Hybrid Central Axis - Far Reaching Ceiling Suspension
The hybrid central axis suspension system is equipped with extra long extension arms to give the system an extended and stable reach.This is especially useful for crowded ceiling space in today’s multifunctional rooms or to keep suspended equipment outside of the sterile zone.
•Extra long extension arms for a wide reaching radius
•Internal safety spring, safety cable catch, secondary pin lock
•For one or two end devices, each up to 21 kg / 46.3 lbs
•Adjustable ceiling substructure to facilitate installation
The system can support up to two arms, each able to suspend up to 21 kg / 46.3 lbs.The hybrid central axis suspension system is equipped with extra long extension arms to give the system an extended and stable reach. This is especially useful for crowded ceiling space in today’s multifunctional rooms or to keep suspended equipment outside of the sterile zone. With 360° rotation (330° with rotation stop) and multiple arm lengths, the hybrid central axis allows great flexibility for room planning and equipment placement demands.
•Extra long extension arms for a wide reaching radius
•Internal safety spring, safety cable catch, secondary pin lock
•For one or two end devices, each up to 21 kg / 46.3 lbs
•Adjustable ceiling substructure to facilitate installation
The system can support up to two arms, each able to suspend up to 21 kg / 46.3 lbs.The hybrid central axis suspension system is equipped with extra long extension arms to give the system an extended and stable reach. This is especially useful for crowded ceiling space in today’s multifunctional rooms or to keep suspended equipment outside of the sterile zone. With 360° rotation (330° with rotation stop) and multiple arm lengths, the hybrid central axis allows great flexibility for room planning and equipment placement demands.
Product category: X-ray devices and accessories, Surgery room equipment
MAVIG OT54001 - Lead Acrylic X-Ray Protective Shield
Scattered radiation protection for femoral and radial access with an overlapping panel curtain and ergonomically fitted radiation protective drapes. Follows the contour of the patient’s body and does not offer any gaps through which the scattered radiation might reach the examiner-perfect for today’s applications.
• Drastic reduction of scattered radiation exposure
• Greater freedom of movement within safe, protective zones
• Reduced burden on the personnel by wearing lighter protective clothing
• Body-shaped cut-out for better positioning above the patient
• Easy integration through compatibility with Portegra2 ceiling-mounted systems
The most serious problem in the application of radiation protection up till now has been the release of radiation from below. This results from the scattered radiation originating in the patient volume radiographed, a considerable proportion of which travels through the patient’s body tissue.
The flexible panel curtain lays perfectly flush to the patient’s body when the protective shield is positioned and stops a significant proportion of the scattered radiation coming from the patient’s body. At the same time the gap between the shield and the surface of the patient‘s body is closed. Measurements and simulations have shown that this can reduce the dose rate where the examiner stands by up to 85%. The effect where the assistant stands is similarly high.Radiation protection covers, “drapes”, that are positioned on the patient extend the protection of the curtain. The shape of each drape is designed specifically for its intended purpose: With a cut-out for femoral puncture and without a separate cut-out for radial puncture. Combined with our dedicated sterile covers, the protective drapes can be placed on top of the sterile patient drape. This allows for quick placement or removal, as well as constant reference to the cover’s position in regards to the image field. The sterile covers also provide an economic and environmental advantage to common disposable drapes.
OT54001 / OT94001 – Radiation protective shield with two patient cut-outs and X-ray protective strips:
• Lead Acrylic Shield Size: 78 x 90 cm (W x H)
• Lead Equivalent: Pb 0.50 mm
• Centrally guided by connecting element
• Weight incl. X-ray protective strips: 15.0 kg
• Accessories: Specially designed sterile covers STEA-OT4 to meet the strict hygienic regulations of hospitals
• Drastic reduction of scattered radiation exposure
• Greater freedom of movement within safe, protective zones
• Reduced burden on the personnel by wearing lighter protective clothing
• Body-shaped cut-out for better positioning above the patient
• Easy integration through compatibility with Portegra2 ceiling-mounted systems
The most serious problem in the application of radiation protection up till now has been the release of radiation from below. This results from the scattered radiation originating in the patient volume radiographed, a considerable proportion of which travels through the patient’s body tissue.
The flexible panel curtain lays perfectly flush to the patient’s body when the protective shield is positioned and stops a significant proportion of the scattered radiation coming from the patient’s body. At the same time the gap between the shield and the surface of the patient‘s body is closed. Measurements and simulations have shown that this can reduce the dose rate where the examiner stands by up to 85%. The effect where the assistant stands is similarly high.Radiation protection covers, “drapes”, that are positioned on the patient extend the protection of the curtain. The shape of each drape is designed specifically for its intended purpose: With a cut-out for femoral puncture and without a separate cut-out for radial puncture. Combined with our dedicated sterile covers, the protective drapes can be placed on top of the sterile patient drape. This allows for quick placement or removal, as well as constant reference to the cover’s position in regards to the image field. The sterile covers also provide an economic and environmental advantage to common disposable drapes.
OT54001 / OT94001 – Radiation protective shield with two patient cut-outs and X-ray protective strips:
• Lead Acrylic Shield Size: 78 x 90 cm (W x H)
• Lead Equivalent: Pb 0.50 mm
• Centrally guided by connecting element
• Weight incl. X-ray protective strips: 15.0 kg
• Accessories: Specially designed sterile covers STEA-OT4 to meet the strict hygienic regulations of hospitals
Product category: X-ray devices and accessories, Surgery room equipment
MAVIG UT70 - Modular Lower Body X-Ray Protection
The modular design of the lower body protection: All components are interchangeable to give you the option to decide what amount of protection is needed and from which side of the table (possible mounting position: left or right).An accessory rail has been built into the shield to give the needed space for table and C-Arm controls, as well as other required equipment.
• Lead equivalent of Pb 0.50 mm for all shields/panels
• Up to max. 1620 mm width
• Additional front accessory rail to match your table profile rail
• Optional wall mounts for storage
• Available for the following table profile rails: 7.7 x 25 mm (GE), 9 x 25 mm (Toshiba/Canon) und 10 x 25 mm (Philips/Siemens)
With the UT70, MAVIG has created a new generation of table mounted shields to offer flexibility with maximum protection. The modular design of the lower body protection: All components are interchangeable to give you the option to decide what amount of protection is needed and from which side of the table (possible mounting position: left or right).
The new large X-ray protective lower body table shield does not only protect the doctor, but the assistant as well. An accessory rail has been built into the shield to give the needed space for table and C-Arm controls, as well as other required equipment.
• Lead equivalent of Pb 0.50 mm for all shields/panels
• Up to max. 1620 mm width
• Additional front accessory rail to match your table profile rail
• Optional wall mounts for storage
• Available for the following table profile rails: 7.7 x 25 mm (GE), 9 x 25 mm (Toshiba/Canon) und 10 x 25 mm (Philips/Siemens)
With the UT70, MAVIG has created a new generation of table mounted shields to offer flexibility with maximum protection. The modular design of the lower body protection: All components are interchangeable to give you the option to decide what amount of protection is needed and from which side of the table (possible mounting position: left or right).
The new large X-ray protective lower body table shield does not only protect the doctor, but the assistant as well. An accessory rail has been built into the shield to give the needed space for table and C-Arm controls, as well as other required equipment.
Product category: X-ray devices and accessories, Surgery room equipment
MAVIG WD261 - Radiation Protective Mobile Shield
The body-contoured, individually height-adjustable, mobile radiation protective shield provides mobile X-ray protection in any location where radiation protection is currently absent or lacks flexibility, leaving your safety at risk and disrupting your work routine.
•Free-moving and effortless height adjustment
•Anatomically formed for a close body fit
•Enables the wearing of lighter radiation protection clothing
•Durable and easy to clean outer material
•Easy and comfortable control pedal use
Mobile X-ray protection in any location where X-ray protection is currently absent or lacks flexibility, leaving your safety at risk and disrupting your work routine.
The compact, anatomically formed shield of the model WD261 allows for a close body fit so that the doctor can move freely throughout the procedure. Due to springs the user can adjust the height of the shield to his own height or working position requested, at any time i.e. also during the procedure.
The shield was designed to offer sufficient legroom in order to eliminate any risk of injury. The unimpeded use of the control pedal of the x-ray unit accounts for another advantage.
More Details
•Height adjustable for individual needs from 1050 to 1350 mm (WD261-S – short version: 910 to 1210 mm)
•Lead equivalent Pb 0.50 mm
•Easy to clean outer material: MAVIG ComforTex HMPF
•Designed for easy and comfortable control pedal use
•High quality, electrically conductive wheels with brakes
•Specially designed sterile covers STEA-WD261 to meet strict hospital hygienic regulations
•Free-moving and effortless height adjustment
•Anatomically formed for a close body fit
•Enables the wearing of lighter radiation protection clothing
•Durable and easy to clean outer material
•Easy and comfortable control pedal use
Mobile X-ray protection in any location where X-ray protection is currently absent or lacks flexibility, leaving your safety at risk and disrupting your work routine.
The compact, anatomically formed shield of the model WD261 allows for a close body fit so that the doctor can move freely throughout the procedure. Due to springs the user can adjust the height of the shield to his own height or working position requested, at any time i.e. also during the procedure.
The shield was designed to offer sufficient legroom in order to eliminate any risk of injury. The unimpeded use of the control pedal of the x-ray unit accounts for another advantage.
More Details
•Height adjustable for individual needs from 1050 to 1350 mm (WD261-S – short version: 910 to 1210 mm)
•Lead equivalent Pb 0.50 mm
•Easy to clean outer material: MAVIG ComforTex HMPF
•Designed for easy and comfortable control pedal use
•High quality, electrically conductive wheels with brakes
•Specially designed sterile covers STEA-WD261 to meet strict hospital hygienic regulations
Product category: Surgery room equipment
MAVIG GD60 - Heavy Load Monitor Suspension System
Our GD60 is one of the most frequently bought systems, worldwide. Designed for heavy load conditions up to 120 kg / 264.5 lbs, it is the ideal solution if multiple monitors or large displays are needed.
•Heavy weight loads up to 120.0 kg / 264.5 lbs possible
•Maximum system/suspension arm range of 2240 mm
•Monitor / display sizes up to 60” possible
•Number of monitors: depending on configuration 1 or 4–8 displays,
•Patented cardanic joint for more security in case of collision
Our patented Cardanic joint, automatic weight balancing, friction free operation, internal cabling as well as rapid adjustment to different monitor sizes are only some of the many features that distinguish the MAVIG GD60 from other monitor suspension systems.
•Different models stationary mounted or with tracks (compatible to OEM track systems)
•Nearly maintenance-free system (non electrical)
•Internally precabled upon request
•Optionally with additional back-up monitors
The GD60 monitor suspension system is available in many different versions
Other specific monitor holder variants of the GD60, e.g. with different frame constructions, colours etc. only opon request.(customer models: GE, Siemens, Philips, Dräger …)
•Heavy weight loads up to 120.0 kg / 264.5 lbs possible
•Maximum system/suspension arm range of 2240 mm
•Monitor / display sizes up to 60” possible
•Number of monitors: depending on configuration 1 or 4–8 displays,
•Patented cardanic joint for more security in case of collision
Our patented Cardanic joint, automatic weight balancing, friction free operation, internal cabling as well as rapid adjustment to different monitor sizes are only some of the many features that distinguish the MAVIG GD60 from other monitor suspension systems.
•Different models stationary mounted or with tracks (compatible to OEM track systems)
•Nearly maintenance-free system (non electrical)
•Internally precabled upon request
•Optionally with additional back-up monitors
The GD60 monitor suspension system is available in many different versions
Other specific monitor holder variants of the GD60, e.g. with different frame constructions, colours etc. only opon request.(customer models: GE, Siemens, Philips, Dräger …)
Product category: Surgical lights, booms
MAVIG YLED-1F-LED Lamp for Diagnosis and Surgery
Examination and minor surgery light with integrated wide range power supply and faceted multiple lens system for minimum shadowing in the field of illumination. Equipped with the Latest lighting technology to bring light into focus.
•Integrated wide-range power supply unit
•Splash water protection – protection class IP44
•Sterilisable handle
•Convenient positioning and focusing
•Free 360° rotation at the connection to the Portegra2 ceiling system
The compact YLED-1F contains 17 powerful LED modules. All modules provide a combined light intensity of 70,000 Lux.
In addition, a wide range power supply is integrated into the housing. This integrated power supply enables you to save space and time by means of simple installation.
Regardless of whether it is ceiling or wall-mounted, the tried-and-tested MAVIG Portegra2 system is ideal for suspending the YLED-1F (and other medical devices). Thanks to its great flexibility as a modular system with many safety features, it can be optimally adapted to a wide range of applications.
The YLED-1F therefore covers a wide range of applications, from examinations to minor surgical procedures. It is intuitively controlled by means of the side-mounted control panel (On/Off, endoscopic light, brightness adjustment) and the sterilisable handle (focusing).
Designed for utmost performance and to meet stringent requirements, the YLED-1F can be used by physicians or specialists, in hospitals or in outpatient surgery centres. It always keeps a “cool head”, because the heat radiation from the YLED-1F is reduced to a minimum, even without complex filter technology.
With the use of considerably more efficient LEDs from the latest generation and a lamp life of at least 50,000 hours, the costs for electricity and lamp replacements are greatly reduced in comparison with the previously widespread halogen lights.
•Integrated wide-range power supply unit
•Splash water protection – protection class IP44
•Sterilisable handle
•Convenient positioning and focusing
•Free 360° rotation at the connection to the Portegra2 ceiling system
The compact YLED-1F contains 17 powerful LED modules. All modules provide a combined light intensity of 70,000 Lux.
In addition, a wide range power supply is integrated into the housing. This integrated power supply enables you to save space and time by means of simple installation.
Regardless of whether it is ceiling or wall-mounted, the tried-and-tested MAVIG Portegra2 system is ideal for suspending the YLED-1F (and other medical devices). Thanks to its great flexibility as a modular system with many safety features, it can be optimally adapted to a wide range of applications.
The YLED-1F therefore covers a wide range of applications, from examinations to minor surgical procedures. It is intuitively controlled by means of the side-mounted control panel (On/Off, endoscopic light, brightness adjustment) and the sterilisable handle (focusing).
Designed for utmost performance and to meet stringent requirements, the YLED-1F can be used by physicians or specialists, in hospitals or in outpatient surgery centres. It always keeps a “cool head”, because the heat radiation from the YLED-1F is reduced to a minimum, even without complex filter technology.
With the use of considerably more efficient LEDs from the latest generation and a lamp life of at least 50,000 hours, the costs for electricity and lamp replacements are greatly reduced in comparison with the previously widespread halogen lights.
Product category: X-ray devices and accessories, Surgery room equipment
MAVIG Portegra2 - Ceiling Suspension System
For many years, MAVIG has been the first choice for many practices and hospitals for ceiling suspension and radiation protection systems. The stable Portegra2 systems from MAVIG don’t just have impressive quality – they are also optimally designed for everyday use in clinics or radiological practices.
The Portegra2 Ceiling Suspension systems feature maximum safety and high flexibility. Components can be assembled in the manner of a modular system and can be tailored to your individual requirements. Components can be assembled in the manner of a modular system and can be tailored to your individual requirements.
The MAVIG life cycle testing ensures 100 percent quality of all products delivered. Furthermore, the products are UL and CE certified. MAVIG has been certified according to ISO EN 13485-2003 by the TÜV product service.
The Portegra2 system is the innovative solution for the protection of the head, eyes, thyroid gland, upper arms and extremities from scattered radiation.
The Portegra2 Ceiling Suspension systems feature maximum safety and high flexibility. Components can be assembled in the manner of a modular system and can be tailored to your individual requirements. Components can be assembled in the manner of a modular system and can be tailored to your individual requirements.
The MAVIG life cycle testing ensures 100 percent quality of all products delivered. Furthermore, the products are UL and CE certified. MAVIG has been certified according to ISO EN 13485-2003 by the TÜV product service.
The Portegra2 system is the innovative solution for the protection of the head, eyes, thyroid gland, upper arms and extremities from scattered radiation.
Product category: X-ray devices and accessories, Surgery room equipment
MAVIG WD204 - Mobile X-Ray Protective Shield
The mobile protection screen WD204, available in different widths, consists of an upper part with transparent lead glass and a lower protective part.
•Easy and simple positioning
•MAVIG lead glass with excellent light transmission
•Light weight aluminum frame construction
Working in radiation exposed environment requires appropriate protection. Therefore this mobile shield combines upper and lower body protection.
Model Specifications:
•MAVIG lead glass with excellent light transmission
•Light weight aluminum frame construction
•Lead equivalents shield Pb 0.50 mm or Pb 2.00 mm (other Pb values on request)
•Lead equivalent window Pb 2.00 mm
•Overall widths 700 to 1600 mm / 27.6 to 63.0 in (in steps of 100 mm / 3.9 in)
•Overall height 1950 mm / 76.8 in
•Easy and simple positioning
•MAVIG lead glass with excellent light transmission
•Light weight aluminum frame construction
Working in radiation exposed environment requires appropriate protection. Therefore this mobile shield combines upper and lower body protection.
Model Specifications:
•MAVIG lead glass with excellent light transmission
•Light weight aluminum frame construction
•Lead equivalents shield Pb 0.50 mm or Pb 2.00 mm (other Pb values on request)
•Lead equivalent window Pb 2.00 mm
•Overall widths 700 to 1600 mm / 27.6 to 63.0 in (in steps of 100 mm / 3.9 in)
•Overall height 1950 mm / 76.8 in
Product category: Surgery room equipment
VivaScope® 2500 – Ex Vivo / Instant Digital Pathology - Confocal Laser Scanning Microscopy
Intraoperative analysis of excised tissue in just a few minutes
VivaScope 2500 is a confocal laser scanning microscope designed specifi cally for the analysis of
biopsies and the assessment of tumour margins during surgery. Samples can be examined directly
after an excision without lengthy procedures.
Speed counts – an alternative to frozen sectioning
• Minimal Preparation
• Direct Assessment
• Considerable Time Savings
• Tissue Integrity
• Remote Diagnosis – Telemedicine
VivaScope 2500 is a confocal laser scanning microscope designed specifi cally for the analysis of
biopsies and the assessment of tumour margins during surgery. Samples can be examined directly
after an excision without lengthy procedures.
Speed counts – an alternative to frozen sectioning
• Minimal Preparation
• Direct Assessment
• Considerable Time Savings
• Tissue Integrity
• Remote Diagnosis – Telemedicine
Product category: Surgery room equipment
VivaScope® 1500/3000 - IN VIVO Confocal Laser Scanning Microscope (830 nm)
•Optical biopsy
•Non-invasive
•Real-time imaging
The VivaScope 1500 offers physicians, clinicians as well as medical and cosmetic researchers the possibility to examine skin in vivo, at cellular resolution, in real time. The VivaScope 1500 provides a non-invasive view into the epidermis all the way down to the superficial dermis.
A near-infrared laser (830 nm) penetrates the superficial layers and is reflected by components of the skin. The strongest reflection is observed with melanin and keratin due to their high refractive indices.
The reflected light is captured by the microscope and translated into grayscale images of the different layers of the skin. The high resolution of the images allows investigators to evaluate individual cells in horizontal optical sections.
The VivaScope 1500 is well-suited for a wide variety of medical and cosmetic applications. Therefore, it has become increasingly popular in many clinics, dermatology offices, cosmetic and pharmaceutical companies as well as research organizations. The latest generation VivaScope 1500 features
a new core technology that significantly improves speed and quality of image acquisition. Examinations using the new device are three times faster than before.
Every VivaScope 1500 is equipped with the VivaCam®, a professional digital dermatoscope, which generates images in HD quality. The VivaScope 1500 can be combined with the handheld VivaScope 3000
as an add-on.
•Non-invasive
•Real-time imaging
The VivaScope 1500 offers physicians, clinicians as well as medical and cosmetic researchers the possibility to examine skin in vivo, at cellular resolution, in real time. The VivaScope 1500 provides a non-invasive view into the epidermis all the way down to the superficial dermis.
A near-infrared laser (830 nm) penetrates the superficial layers and is reflected by components of the skin. The strongest reflection is observed with melanin and keratin due to their high refractive indices.
The reflected light is captured by the microscope and translated into grayscale images of the different layers of the skin. The high resolution of the images allows investigators to evaluate individual cells in horizontal optical sections.
The VivaScope 1500 is well-suited for a wide variety of medical and cosmetic applications. Therefore, it has become increasingly popular in many clinics, dermatology offices, cosmetic and pharmaceutical companies as well as research organizations. The latest generation VivaScope 1500 features
a new core technology that significantly improves speed and quality of image acquisition. Examinations using the new device are three times faster than before.
Every VivaScope 1500 is equipped with the VivaCam®, a professional digital dermatoscope, which generates images in HD quality. The VivaScope 1500 can be combined with the handheld VivaScope 3000
as an add-on.
Company news
Date
Topic
Download
Nov 13, 2020
World premiere: MAVIG presents the new Medium-Load Monitor Suspension System GD50 for the first time
With the increasing number of clinical applications and evolving spaces, MAVIG has expanded its previous generation of medium-load monitor mount systems into a versatile product that meets the ever-growing needs of users: The GD50
• Free choice of a fixed point or ceiling track installation
• Maximum load capacity at the end of the spring arm (without monitor holder) up to 45.0 kg or 57.0 kg
• Varying monitor sizes (19 - 32”) and quantities (1 - 4)
For decades now, MAVIG has been the first choice for monitor suspension systems. These sturdy, high-quality systems are perfectly designed for the daily needs of hospitals or radiology practices. They offer the maximum in terms of safety and high flexibility. Any make of monitor can be easily installed and positioned – provided that you have a backside mounting VESA adapter. Life cycle testing ensures 100% quality for all MAVIG products.
Design Details of the GD50
• Ceiling tracks either 2500 or 4000 mm in length, for greater range or hybrid operating theatres
• Column lengths of 140 up to 490 mm, suitable for rooms with many different ceiling heights
• Single spring arm version 1010 mm in length
• Or complete support arm as a combination of spring arm and extension arm of 1010 mm plus 1200 mm in length = working radius of 2210 mm
• 330° rotation on all joints and adjustable rotation stops in 60° steps on the monitor suspension (spring arm – monitor holder)
• Adjustable vertical movement from +40° through to -40° at 45.0 kg load capacity and +28° through to -40° at 57.0 kg load capacity
• Preinstalled power cabling for monitor and earthing and additional components earthing
Simple Product Configuration Using the MAVIG Modular Structure
Components can be assembled in the manner of a modular system and can be tailored to your individual requirements.For easy installation and trouble-free use, please use this summary to decide which configuration of your GD50 monitor suspension system best suits your needs.
• Free choice of a fixed point or ceiling track installation
• Maximum load capacity at the end of the spring arm (without monitor holder) up to 45.0 kg or 57.0 kg
• Varying monitor sizes (19 - 32”) and quantities (1 - 4)
For decades now, MAVIG has been the first choice for monitor suspension systems. These sturdy, high-quality systems are perfectly designed for the daily needs of hospitals or radiology practices. They offer the maximum in terms of safety and high flexibility. Any make of monitor can be easily installed and positioned – provided that you have a backside mounting VESA adapter. Life cycle testing ensures 100% quality for all MAVIG products.
Design Details of the GD50
• Ceiling tracks either 2500 or 4000 mm in length, for greater range or hybrid operating theatres
• Column lengths of 140 up to 490 mm, suitable for rooms with many different ceiling heights
• Single spring arm version 1010 mm in length
• Or complete support arm as a combination of spring arm and extension arm of 1010 mm plus 1200 mm in length = working radius of 2210 mm
• 330° rotation on all joints and adjustable rotation stops in 60° steps on the monitor suspension (spring arm – monitor holder)
• Adjustable vertical movement from +40° through to -40° at 45.0 kg load capacity and +28° through to -40° at 57.0 kg load capacity
• Preinstalled power cabling for monitor and earthing and additional components earthing
Simple Product Configuration Using the MAVIG Modular Structure
Components can be assembled in the manner of a modular system and can be tailored to your individual requirements.For easy installation and trouble-free use, please use this summary to decide which configuration of your GD50 monitor suspension system best suits your needs.
Nov 13, 2020
MAVIG YLED-1F – LED Lamp with Acrobat® Swing Systems
Optimal examination and operation conditions can only be achieved if a precise illumination of the wound area is guaranteed. The correct positioning of the lamp body is therefore essential. Whether in veterinary medicine, gynecology or many other fields: space-saving, mobile and economically viable solutions are increasingly in demand.
For this reason, MAVIG now offers its examination lamp YLED-1F with the practical "plug and play" installation in combination with the proven Acrobat® Swing mobile system and ceiling column.
The compact YLED-1F contains 17 powerful LED modules. All modules provide a combined light intensity of 70,000 Lux.
In addition, a wide range power supply is integrated into the housing. This integrated power supply enables you to save space and time by means of simple installation. The YLED-1F therefore covers a wide range of applications, from examinations to minor surgical procedures. It is intuitively controlled by means of the side-mounted control panel (On/Off, endoscopic light, brightness adjustment) and the sterilisable handle (focusing).
For this reason, MAVIG now offers its examination lamp YLED-1F with the practical "plug and play" installation in combination with the proven Acrobat® Swing mobile system and ceiling column.
The compact YLED-1F contains 17 powerful LED modules. All modules provide a combined light intensity of 70,000 Lux.
In addition, a wide range power supply is integrated into the housing. This integrated power supply enables you to save space and time by means of simple installation. The YLED-1F therefore covers a wide range of applications, from examinations to minor surgical procedures. It is intuitively controlled by means of the side-mounted control panel (On/Off, endoscopic light, brightness adjustment) and the sterilisable handle (focusing).
About us
Company details
X-Ray Protection and Medical Suspension Systems
• Founded in 1921
• 100% family-owned and owner-managed
•Made In Germany
The MAVIG Product Portfolio includes:
Personal radiation protection equipment, for users and patients:
From gloves to goggles, thyroid protection to an extensive choice of protective clothing for a variety of applications.
On-site X-Ray Protection: Mobile shields, ceiling-mounted shields, and lower body protection mounted on operating tables provide comprehensive X-Ray protection.
Suspension Systems for Medical Equipment: The strong arm of MAVIG: Flexible and reliable suspension systems allow to freely position medical equipment such as radiation protection screens, lights or monitors.
Lamps: The ceiling-mounted lamps from MAVIG are of high-quality and fitted with adjustable brightness and focusable illumination.
Miscellanious Accessories: MAVIG offers the a variety of accessories for on-site radiation protection as well as for personal protective equipment, such as storage systems or sterile disposable covers.
• Founded in 1921
• 100% family-owned and owner-managed
•Made In Germany
The MAVIG Product Portfolio includes:
Personal radiation protection equipment, for users and patients:
From gloves to goggles, thyroid protection to an extensive choice of protective clothing for a variety of applications.
On-site X-Ray Protection: Mobile shields, ceiling-mounted shields, and lower body protection mounted on operating tables provide comprehensive X-Ray protection.
Suspension Systems for Medical Equipment: The strong arm of MAVIG: Flexible and reliable suspension systems allow to freely position medical equipment such as radiation protection screens, lights or monitors.
Lamps: The ceiling-mounted lamps from MAVIG are of high-quality and fitted with adjustable brightness and focusable illumination.
Miscellanious Accessories: MAVIG offers the a variety of accessories for on-site radiation protection as well as for personal protective equipment, such as storage systems or sterile disposable covers.