Please log in
You must be logged in to send the contact request.
Manage stand orders
Select Option
AIRFAN S.A.S.
9, Chemin de la Salvetat ZI en Jacca,
31770
Colomiers
France
France
Submit your contact details
Provide your contact details to the exhibitor. Optionally, you may also add a personal message.
Your name, phone number, and e-mail address are subject to the submission of personal data. Messe Düsseldorf GmbH expressly points out that for a data transmission into third countries, for which no adequacy decision of the EU-commission is on hand certifying an adequate level of protection of personal data, it is not ensured that there are appropriate safeguards for the protection of personal data on hand.
An error has occurred
Please check your internet connection or try again later.
Message has been sent
Your message to the exhibitor was sent successfully.
This company is co-exhibitor of
Business France EPIC SA
Media files
Contact
Laurent ROUVIERE
Sales & Business Dev Director
Sales
Sales
9 Chemin de la Salvetat
31770 Colomiers, France
Phone
+33 682 88 9010
Serge JARDEL
Sales and Business Dev Manager
Sales
Sales
Xavier PRAT
Engineering - R&D Manager
Engineering
Engineering
Quentin JARDEL
Product Eng'g Manager
Engineering
Engineering
9 Chemin de la Salvetat
31770 Colomiers, France
Phone
+33 534 50 4550
Email
quentin.jardel@airfan.fr
Please log in
You must be logged in to use matchmaking
Please log in for matchmaking
Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.
Let's get started!
Welcome to Matchmaking. Would you like to get in touch with ?
Visit us
16 Nov 2020
Topic
14:00 - 18:00
Blower Live Demonstration
You can contact us to get a live demonstration.
17 Nov 2020
Topic
10:00 - 18:00
Blower Live Demonstration
You can contact us to get a live demonstration.
18 Nov 2020
Topic
10:00 - 18:00
Blower Live Demonstration
You can contact us to get a live demonstration.
19 Nov 2020
Topic
10:00 - 18:00
Blower Live Demonstration
You can contact us to get a live demonstration.
Our range of products
Product categories
- 05 Components, modules, OEM equipment
- 05.02 Pneumatic actuators
Pneumatic actuators
- Product Family - Airfan Blowers
- MFA0500: Centrifugal Blower For Hospital Respiratory Treatment with O2 port before turbine and motor cooling system
- MFA0300: Centrifugal Blower For Hospital And Home Care Respiratory Treatment with motor cooling system
- MFA0296: Centrifugal Blower For Hospital And Home Care Respiratory Treatment with blended Air+O2
- MFA0208: Naked Blower designed for specific integration with Blended Air+O2
- MFA0800: Ventilator For Devices OF Cough Assistance
- MFA0290: The perfect cost-performance optimization, quiet, ideal for home care ventilators
- MFA0205: Naked Blower designed for specific integration with turbine cooling system
- MFA0206: Naked Blower designed for specific integration with O2 port before turbine without motor cooling system
- 05 Components, modules, OEM equipment
- 05.13 Other components, modules, OEM equipment
Other components, modules, OEM equipment
- Product Family - Airfan Blowers
- MFA0500: Centrifugal Blower For Hospital Respiratory Treatment with O2 port before turbine and motor cooling system
- MFA0300: Centrifugal Blower For Hospital And Home Care Respiratory Treatment with motor cooling system
- MFA0296: Centrifugal Blower For Hospital And Home Care Respiratory Treatment with blended Air+O2
- MFA0208: Naked Blower designed for specific integration with Blended Air+O2
- MFA0800: Ventilator For Devices OF Cough Assistance
- MFA0290: The perfect cost-performance optimization, quiet, ideal for home care ventilators
- MFA0205: Naked Blower designed for specific integration with turbine cooling system
- MFA0206: Naked Blower designed for specific integration with O2 port before turbine without motor cooling system
Our products
Product category: Pneumatic actuators, Other components, modules, OEM equipment
Product Family - Airfan Blowers
Would you like to benefit from Airfan’s technology for your products or systems?
Take advantage of our expertise in turbomachines.
Do not hesitate to contact us, we are at your disposal to respond to your needs and find optimized ventilation solutions.
Take advantage of our expertise in turbomachines.
Do not hesitate to contact us, we are at your disposal to respond to your needs and find optimized ventilation solutions.
Product category: Pneumatic actuators, Other components, modules, OEM equipment
MFA0500: Centrifugal Blower For Hospital Respiratory Treatment with O2 port before turbine and motor cooling system
Intensive Care, Neonatal and Emergency/Transportation, with the air-oxygen mixture in the turbine with 100% safety even at very low flow rates (1-5 l/min), developed for maximum efficiency even in extreme cases in intensive care.
PRODUCT FEATURES
PRODUCT FEATURES
- Pressure range up to 110 hPa à 80 l/mn
- Acceleration to follow the patient’s respiratory cycles
- Compatibility with Hospital Oxygen
- Securing of Oxygen injection by absolute segregation between the electrical parts and the patient’s air circuit.
- Allows the use of Oxygen at high concentrations at very low flow (<2 l/min) to 40HPa and at very high breathing cycles (200 bpm)
- Supply voltage 24 VDC
- Fully soundproofed solution
- Reliability of the system on patients treated 365/24/7
- Service Life (L10) > 40 000H
Product category: Pneumatic actuators, Other components, modules, OEM equipment
MFA0300: Centrifugal Blower For Hospital And Home Care Respiratory Treatment with motor cooling system
Highly effecient, quiet, perfectly adapted to all life support applications.
PRODUCT FEATURES
PRODUCT FEATURES
- Pressure range up to 80 hPa à 80 l/mn
- Acceleration to follow the patient’s respiratory cycles
- Fully soundproofed solution
- Supply voltage 24 VDC
- Reliability of the system on patients treated 365/24/7
- Service Life (L10) > 40 000H
Product category: Pneumatic actuators, Other components, modules, OEM equipment
MFA0296: Centrifugal Blower For Hospital And Home Care Respiratory Treatment with blended Air+O2
Respiratory Assistance Ventilator with complete segregation between patient flow and cooling flow allowing high pressure, low flow operation over time.
PRODUCT FEATURES
PRODUCT FEATURES
- Pressure range up to 65 hPa à 80 l/mn
- Securing of Oxygen injection by absolute segregation between the electrical parts and the patient’s air circuit.
- Allows the use of Oxygen at high concentrations at very low flow (<2 l/min) and at very high breathing cycles (200 bpm)
- Acceleration to follow the patient’s respiratory cycles
- Supply voltage 24 VDC
- Fully soundproofed solution
- Reliability of the system on patients treated 365/24/7
- Service Life (L10) > 40 000H
Product category: Pneumatic actuators, Other components, modules, OEM equipment
MFA0208: Naked Blower designed for specific integration with Blended Air+O2
An AIRFAN turbine’s naked architecture with its patented independent motor cooling system, MFA0208 allowing O2 injection before the turbine is specially designed for O2 blender offering safety and comfort to the patient.
PRODUCT FEATURES
PRODUCT FEATURES
- Pressure range up to 65 hPa à 80 l/mn
- Securing of Oxygen injection by absolute segregation between the electrical parts and the patient’s air circuit.
- Allows the use of Oxygen at high concentrations at very low flow (<2 l/min) and at very high breathing cycles (200 bpm)
- Acceleration to follow the patient’s respiratory cycles
- Supply voltage 24 VDC
- Reliability of the system on patients treated 365/24/7
- Specially developed for safe oxygen injection at high pressure and low flow rate before the turbine
Product category: Other components, modules, OEM equipment, Pneumatic actuators
MFA0800: Ventilator For Devices OF Cough Assistance
An AIRFAN blower’s new design with its patented motor cooling system, MFA0800 is designed for implementation in cough assistance machine
PRODUCT FEATURES
PRODUCT FEATURES
- Pressure range up to + 110 hPa
- Maximum Flow Rate (pressure) > 750 l/min.
- Operating point from 100 hPa to 200 l/min.
- Maximum suction of – 95 hPa
- Maximum flow rate (suction) > 750 l/min.
- Operating point from -90 mb to 200 l/min.
- Internal engine cooling system
- Supply voltage 24 VCD
- Good dynamic behaviour (Acceleration / Deceleration)
Product category: Other components, modules, OEM equipment, Pneumatic actuators
MFA0290: The perfect cost-performance optimization, quiet, ideal for home care ventilators
The perfect compromise, a standard AIRFAN blower’s architecture with its patented motor cooling system and its unique soundproofing housing.
The MFA290 is an optimized price for implementation in ventilators dedicated to Acute, Sub-Acute and Home Care.
PRODUCT FEATURES
The MFA290 is an optimized price for implementation in ventilators dedicated to Acute, Sub-Acute and Home Care.
PRODUCT FEATURES
- Pressure range up to 68 hPa à 80 l/mn
- Acceleration to follow the patient’s respiratory cycles
- Supply voltage 24 VDC
- Reliability of the system on patients treated 365/24/7
- Specially developed to provide high performance at an optimized cost
- Service Life (L10) > 40 000H
Product category: Pneumatic actuators, Other components, modules, OEM equipment
MFA0205: Naked Blower designed for specific integration with turbine cooling system
An AIRFAN turbine’s naked architecture with its patented motor cooling system, MFA0205 is designed for implementation on ventilators dedicated to Home Care and Bi-Level.
PRODUCT FEATURES
PRODUCT FEATURES
- Pressure range up to 68 hPa à 80 l/mn
- Acceleration to follow the patient’s respiratory cycles
- Small footprint, system without case
- Internal engine cooling system
- Supply voltage 24 VDC
- Reliability of the system on patients treated 365/24/7
Product category: Pneumatic actuators, Other components, modules, OEM equipment
MFA0206: Naked Blower designed for specific integration with O2 port before turbine without motor cooling system
The MFA0206 is designed for implementation on ventilators dedicated to Home Care and Bi-Level using O2 injection before the turbine. It’s derivate from the MFA0205 without inner motor cooling system.
PRODUCT FEATURES
PRODUCT FEATURES
- Pressure range up to 68 hPa à 80 l/mn
- Acceleration to follow the patient’s respiratory cycles
- Small footprint, system without case
- Internal engine cooling system
- Supply voltage 24 VDC
- Reliability of the system on patients treated 365/24/7
About us
Company portrait
Expert in centrifugal blower for mechanical ventilators
Airfan is specialized in the design and manufacturing of “micro-turbines” for respiratory equipment.
Since 2003, we have been using our expertise in turbomachines to improve patient comfort. We have developed advanced fan technology with soundproof ventilation solutions that ensure high efficiency an high acceleration rates.
Experts in turbomachines
Airfan was born from the expertise of Airtechnologies specialized in the design and manufacturing of custom-made turbomachines. For more than 20 years, Airtechnologies has worked in partnership with the research teams of major contractors, leaders in such sectors as aeronautics, medical devices, nuclear research, shipbuilding and automotive construction.
In 2003, the shareholders of Airtechnologies created Airfan. With their expertise in turbomachines, they have developed an innovative and efficient centrifugal blower for mechanical ventilators.
Our teams are highly qualified and come mainly from the aeronautics industry due to their excellence skill set.
Our commitment to quality
At Airfan, we are proud of the reliability of tens of thousands of our turbines operating 24/7 in respiratory support.
Reliability is a major component of the company, so we subject our products to rigorous quality control at every stage of the manufacturing process in order to ensure optimal operation.
Airfan is certified ISO 9001 and ISO 13485 to meet the quality and cost optimization requirements of manufacturers of industrial and medical equipment.
Innovation to performance
Patient comfort is the core of our approach, so we pay great attention to innovation, in order to always improve the capacities of our products.
A large part of our activity is devoted to this purpose in research and development to design and manufacture highly efficient turbomachines. We are constantly investing more than 10% of our turnover in R&D to market innovative and differentiating products for our customers.
Airfan is specialized in the design and manufacturing of “micro-turbines” for respiratory equipment.
Since 2003, we have been using our expertise in turbomachines to improve patient comfort. We have developed advanced fan technology with soundproof ventilation solutions that ensure high efficiency an high acceleration rates.
Experts in turbomachines
Airfan was born from the expertise of Airtechnologies specialized in the design and manufacturing of custom-made turbomachines. For more than 20 years, Airtechnologies has worked in partnership with the research teams of major contractors, leaders in such sectors as aeronautics, medical devices, nuclear research, shipbuilding and automotive construction.
In 2003, the shareholders of Airtechnologies created Airfan. With their expertise in turbomachines, they have developed an innovative and efficient centrifugal blower for mechanical ventilators.
Our teams are highly qualified and come mainly from the aeronautics industry due to their excellence skill set.
Our commitment to quality
At Airfan, we are proud of the reliability of tens of thousands of our turbines operating 24/7 in respiratory support.
Reliability is a major component of the company, so we subject our products to rigorous quality control at every stage of the manufacturing process in order to ensure optimal operation.
Airfan is certified ISO 9001 and ISO 13485 to meet the quality and cost optimization requirements of manufacturers of industrial and medical equipment.
Innovation to performance
Patient comfort is the core of our approach, so we pay great attention to innovation, in order to always improve the capacities of our products.
A large part of our activity is devoted to this purpose in research and development to design and manufacture highly efficient turbomachines. We are constantly investing more than 10% of our turnover in R&D to market innovative and differentiating products for our customers.