Teleflex Medical OEM of County Limerick at COMPAMED 2021 in Düsseldorf -- COMPAMED Trade Fair
Manage stand orders
Select Option
Premium Exhibitor OEM

Teleflex Medical OEM

Units 7-10, Annacotty Business Park, V94 County Limerick
Ireland
Telephone +353 61 331906
Fax +353 61 330725
oeminfo@teleflexmedicaloem.com

Submit your contact details

Provide your contact details to the exhibitor. Optionally, you may also add a personal message.

Please log in

You must be logged in to send the contact request.

An error has occurred

Please check your internet connection or try again later.

Message has been sent

Your message to the exhibitor was sent successfully.

Hall map

COMPAMED 2021 hall map (Hall 13): stand E29

Fairground map

COMPAMED 2021 fairground map: Hall 13

Our range of products

Product categories

  • 01  Manufacturing of components
  • 01.02  Plastics processing
  • 01.02.05  Plastics processing full service

Plastics processing full service

  • 01  Manufacturing of components
  • 01.08  Rapid prototyping

Rapid prototyping

  • 06  Electrical components, electronical components
  • 06.01  Sensors
  • 06.01.07  Temperature sensors
  • 08  Raw materials, materials, adhesives
  • 08.05  Semi-finished products

Semi-finished products

Our products

Product category: Extrusion, Other component manufacturing, Tubings and tubing equipment

Work With The Extrusion Experts™

Teleflex Medical OEM is a global leader for the precision extrusion in PTFE, FEP, PEEK and other high-performance fluoropolymers and thermoplastics. From heat-shrink tubing to multi-lumen tubing to ultra-thin PTFE liners, we produce extrusion with outstanding tolerance control, length accuracy, and concentricity.

We extrude fluoropolymers and thermoplastics to some of the tightest tolerances, with additional heat-shrink and etching capabilities. We can also fabricate braid- and coil-reinforced tubing in a broad selection of materials, sizes, and wall thicknesses. Co-extrusions are yet another area of expertise – for encapsulated stripes and multiple layers, for over coating of wires, and for combining dissimilar materials.

Our expertise extends to:
  • PTFE, FEP, PEEK, and other fluoropolymers and high-performance thermoplastics
  • PTFE etched liners
  • PTFE: customized tensile strength and elongation properties
  • FEP and PTFE heat-shrink tubing
  • Micro-diameter tubing
  • Co-extrusion
  • Multi-layer tubing
  • FEP IV tubing
  • Custom compounding, including colors and fillers
 There are plenty of extrusion suppliers in the world. But only Teleflex Medical OEM offers you a winning combination of vertically-integrated capabilities, deep expertise, and a history of industry-changing innovations.

Let’s get to work on your project.

More Less

Product category: Catheters, Other component manufacturing, Product design, product development

Work With The Catheter Experts™

Make your complex catheter concept a reality with Teleflex Medical OEM. We are known across the world as a leader in custom-engineered diagnostic and interventional catheters. Unlike other catheter manufacturers who supply only a few catheter components, Teleflex Medical OEM brings all the latest technologies to your project and can provide everything from extrusions to product assembly to packaging. You have the security of knowing that Teleflex Medical OEM has complete control over each step of product development and manufacturing process and can quickly respond to any immediate need. 

There are plenty of catheter manufacturers in the world. But only Teleflex Medical OEM offers you a winning combination of vertically integrated capabilities, deep expertise, decades of experience, and a history of industry-changing innovations. Let’s work together to create something amazing.

  • Diagnostic and interventional catheters custom-engineered from proximal end to distal tip
  • Balloon catheters and balloons
  • Microcatheters
  • Catheters with steerable, deflectable tips
  • Braid- and coil-reinforced shafts
  • Continuous, variable pitch braid- or coil-reinforced shafts
  • Broad selection of lubricious liners and jacket materials
  • PTFE-lined catheters
  • Hydrophilic coating services
  • Medical wire products
  • Custom-configured tip and shaft segments
  • Single- and multi-lumen tubing
  • Multi-segment and multi-durometer shafts
Let’s get to work on your catheter project.

More Less

Product category: Extrusion, Catheters, Product design, product development, Other component manufacturing

EPIC Medtec® Center in Ireland: The Benefits are All Yours

Welcome To Device Development Reimagined
  • Get your device to Market FAST
  • Control costs
  • Develop a market-ready device
  • Reduce technical risk
You have a great idea for a medical device. You know what the device needs to do. But your R&D resources are involved with other projects; or you may need insight or unbiased opinion of a device’s design for manufacturability. Working together at one of our EPIC Medtec® Centers (Engineering, Prototyping, Innovation, Collaboration), we can identify challenges and find answers, while controlling concept development and production costs.

We start by learning everything we can about your device concept and its application. Then launch into our proprietary, multi-stage IDEA Medtec® Process (Innovation, Development, Engineering Accelerator) that incorporates your requirements early in the concept stage and maintains focus on design for manufacturability.

Ready to go into production? We can handle that too. With a global network of state-of-the-industry facilities, we provide extensive, vertically-integrated, manufacturing capabilities. 

Our expert team in  Limerick, Ireland is ready to get to work on your project.

More Less

Product category: Product design, product development, Other component manufacturing

We're the Source for Customized Sutures and Performance Fibers

Make your suture or fiber-based concept a reality with Teleflex Medical OEM. We are one of the world’s few, vertically integrated, full-line suture and fiber producers with the expertise and resources to customize product performance to your specific applications. Our ability to take your project from resin to fiber to component to suture to finished device makes us a true single source solution.
 
Teleflex Medical OEM has a history of innovation and technical expertise. We draw on our extensive range of materials (both absorbable and non-absorbable), sizes (USP/EP and custom), PIC counts, and coatings to meet your specific requirements for strength, flexibility, and handling. We also offer a large assortment of colors and patterns that allows for enhanced visibility and differentiation.

Teleflex Medical OEM can polymerize, extrude, braid, and tip in-house, and develop unique compounds and coatings. Many projects incorporate proprietary materials and our unique braid constructions for greater tensile strength, increased lubricity, and outstanding knot break strength.

Our portfolio includes:
  • Force Fiber Fusion® Suture ( ultra-high, molecular-weight polyethylene [UHMWPE])
  • Force Fiber® OrthoTape® Braid (UHMWPE)
  • Force Fiber® Suture (UHMWPE)....NEW! BLACK Force Fiber® Suture 
  • Polyester Sutures
Let's get to work on your project.

More Less

Product category: Extrusion, Other component manufacturing, Tubings and tubing equipment

Your Source for PTFE Spiral Heat-Shrink Tubing

Teleflex Medical OEM is a global leader for the precision extrusion PTFE (Polytetraflouroethylene) spiral heat-shrink tubing. It can provide a protective covering that resists heat, shock, corrosion, moisture, and other extremes. The tubing also is water resistant, chemically inert, and is produced in a variety of custom sizes with a range of shrink ratios. 

Spiral heat-shrink tubing is used in the medical device industry for guidewire visibility during endoscopic procedures. The spiral jacket on the wire allows the surgeon to judge the insertion rate into the body.

  • Shrink ratios to 4:1.
  • Minimum expanded ID: 0.002″ (0.051mm) larger than maximum core diameter.
  • Maximum recovered ID: 0.003″ (0.076mm) smaller than minimum core diameter.
  •  Recovered wall thickness +/- .001″ (0.0025mm) when over the nominal core.
  •  Our expert team can minimize lengthwise shrinkage at recovery.
Let’s get to work on your project.

 

More Less

Product category: Catheters, Other component manufacturing, Product design, product development

Partner with Us to Add Maneuverability to Your Catheter Design

At Teleflex Medical OEM, we are ready to work with you to enhance the performance of your catheter design. Our unique set of capabilities allows us to customize your design with steerable and deflectable elements while maintaining dimensional stability, pushability, and kink resistance.

Capabilities
  • Add steering or deflection to your catheter design for another level of control to the shaft
  • We can provide maximum configurability from small deflection of the tip to full motion
  • Customized handles for multidirectional devices
  • Steering and deflection is also available for introducers
Known Applications
Diagnostic, therapeutic, and interventional applications, including vessel access and delivery, electrophysiology, ablation for arterial fibrillation, endoscopy, and more. Contact one of our sales representatives to discuss your unique application
 
Let’s get to work on your catheter project.

More Less

Product category: Extrusion, Tubings and tubing equipment

Think Small: Micro-Diameter Tubing

Teleflex Medical OEM is a global leader in ultra-small tubing used for peripheral vascular, cardiology, and neurology applications. We manufacture tubing with IDs ranging from 0.002” to 0.091” (.0508mm to 2.31mm) and wall thickness from 0.003” to 0.007” (.008mm to 0.178mm). Our capabilities include reinforced and conductor-embedded tubing designs constructed of polyimide, PTFE, thermoplastics, and hybrid blends.

Polyimide, Micro-Diameter Tubing
Teleflex Medical OEM uses a unique combination of ductility, strength, and stiffness to provide toughness and durability. Our polyimide tubing withstands repeated changes in bending, pressure, and tension. Our expertise includes:
Polyimide hybrid tubing
Coil-wire, reinforced polyimide tubing
Braid-wire, reinforced polyimide tubing

 PTFE Lubricious Tubing
  • Lowest coefficient of friction polymer (very lubricious)
  • Resistant to most chemicals
  • Utilized to coat the inside diameter of a tubing product or blended with another polymer
  • Etched surface available
PD-Slick™ Tubing
A proprietary blend of PTFE and polyimide
  • Gamma radiation resistant
  • Material can be used to coat either the inside or outside diameter of a tubing product
  • Low friction with the material properties of polyimide
Let’s get to work on your extusion project.

More Less

Product category: Product design, product development, Other component manufacturing

Customized Medical Wire and Conductors from Teleflex Medical OEM

Teleflex Medical OEM, manufactures a full line of uninsulated and insulated medical wire products for a range of uses. Our comprehensive capabilities provide solutions for many applications.
  • Single End Wire
  • Single T/C Parallel
  • Single T/C Twist Wire
  • Multi T/C Twist Wire
  • Twisted Wire
  • Stranded Wire
  • Multi Parallel (filar) wire
  • Laser Stripped Wire
  • Mandrel Wire
  • Uninsulated Wire
Conductors
Teleflex Medical OEM is a global source for specialty conductors, which includes a full line of silver- or nickel-plated, copper or copper alloy devices. Our conductors can be combined with sensor technology to measure key medical signals that support customer’s diagnostic/interventional delivery device design.
  • Ultra-fine wire from 44 to 52 AWG (American Wire Gauge) with the capability of producing 56 AWG CS-95 wire
  • Environmentally friendly, cadmium-free conductor materials
  • Tinsel wire in multiple conductor/fiber combinations
  • Diverse, in-house capabilities including bobbin winding, bunching, stranded wire, and single-end wire
Medical Wire Coatings
Teleflex Medical OEM offers a variety of wire coatings including, polyurethane, polyimide, PTFE, and polyurethane-SB. View our Wire Coatings page to learn more about our wire coating capabilities and find a product that meets your needs.

Let’s get to work on your project.

More Less

Product category: Catheters, Other component manufacturing

Highly Concentric, Large Diameter Shafts with Thin Walls

At Teleflex Medical OEM, our technical expertise in thin-wall, reinforced catheter shafts is among the best in the industry. We are a global leader in terms of tubing profiles and tolerances on the inner and outer diameters of reinforced shafts. In addition, we can meet very high concentricity levels on wall thickness. 

Our catheter team has the deep expertise and the integrated capabilities that allow us to successfully take on the large-diameter catheter projects others simply cannot handle. This is due to:
  • Proprietary manufacturing techniques and “trade secret” knowledge developed over the 25+ years.
  • Teleflex Medical OEM’s culture of incremental innovation and asking, “Why not?”
  • Comprehensive, in-house, vertically-integrated capabilities, which include product concept development, engineering, material selection, regulatory services, design for manufacturability, prototyping, manufacturing, and finishing operations.
Top Four Reasons to Partner with Us for Your Catheter Project
ONE: Market-leading capabilities and tolerances
TWO: Full range of value-added capabilities
THREE: Broad range of material and reinforcement combinations
FOUR: Knowledge, experience and the expertise gained over 25+ year

Let's get to work  on your catheter project.

More Less

Product category: Extrusion, Catheters, Surface coating, Other component manufacturing

Hydrophilic Coating Services: Improve Your Device’s Performance

Teleflex Medical OEM’s proprietary, hydrophilic coating stands out from the rest! Testing indicates the coating performs favorably for lubricity and durability compared to competitors’ products. Like other surface technologies, our hydrophilic coating may reduce the required insertion force which may result in improved control, placement, and tracking of a device. The coating also may lessen damage to tissue and vasculature.

Our lubricious, hydrophilic coating  offers:
  • Customization of formula to meet your performance requirements
  • Low particulate count* (meets USP 788 standards)
  • Biocompatibility
  • Shelf life stability* to help you mange cost and supply challenges
  • Proven coating and substrate adherence
At Teleflex Medical OEM, we understand that how a coating is applied can be as important as the coating itself. That is why we offer:
  • Fully-automated coating application technology and curing process:
  • UV-cured formulation in a temperature and humidity-controlled cleanroom
  • Single- and dual-dip formulations
  • Variable speed, dip coating process
Already have a surface technology for your device? Teleflex Medical OEM will collaborate with you and/or your coating-formula partner to define a coating program based on your requirements.

Let’s get to work on your project.

* Note: Test data on file.

More Less

Product category: Product design, product development, Other component manufacturing, Catheters

Innovation in Balloons and Balloon Catheters Starts Here

Teleflex Medical OEM is your single source solution for balloon and balloon catheter design, development, and manufacturing. Unlike some manufacturers who deliver only balloon components or outsource your project to multiple vendors, Teleflex Medical OEM has the in-house, vertically integrated capabilities to provide everything from precision extrusion to balloon blowing to catheter assembly and packaging. Value-added services we can provide include:
  • Concept design and development
  • Design for manufacturability
  • Rapid prototyping
  • Testing and validation
  • Balloon blowing of non-compliant, semi-compliant, and compliant materials
  • In-house, custom tooling
  • Pre-clinical and pilot manufacturing
  • Component, sub-assembly, and finished device manufacture
Our engineers, material and polymer experts, and skilled technicians make Teleflex Medical OEM stand above the rest. You can count on us to enhance your design, develop functional prototypes, guide you through the maze of global regulations, and scale up for manufacturing.

Let's get to work on  your project.

More Less

Product category: Product design, product development, Other component manufacturing

Global Resource for Custom-Engineered Bioabsorbable Sutures, Yarns, and Resins

If development of bioabsorbable components or sutures is your plan, you should partner with Teleflex Medical OEM. We are one of the world’s few, vertically integrated suture and fiber producers with the expertise and resources to customize product performance characteristics.  Our ability to take your project from resin to yarn to component to suture makes Teleflex Medical OEM a true single source solution.
 
Teleflex Medical OEM has a history of innovation and technical expertise in bioabsorbables. We draw on our portfolio of materials, deniers, PICs, and sizes (USP/EP and custom) to meet your specific requirements for absorption rates, strength, flexibility, and handling. We can also make custom blends and compounds with different additives for characteristics such as anti-microbial, increased lubricity, and radiopacity customized to your performance requirements.

Our team of highly-qualified engineers, material and polymer experts, and skilled technicians makes Teleflex Medical OEM stand above the rest. Whatever you project demands, we have a spectrum of world-class talent to draw from. It is important to note our in-house team can compound, polymerize, extrude, and braid.

Our expertise extends to bioabsorbable:
  • Sutures
  • Yarns
  • Resins
Let's get to work on your project.

More Less

Product category: Product design, product development, Other component manufacturing

Customized-Engineered Sheath/Dilator Sets

Make your access device concept a reality with Teleflex Medical OEM. With our years of experience in device development, we can produce a broad range of peripheral and vascular access systems that are manufactured and assembled to your specifications. Unlike other manufacturers who supply only a few components, Teleflex Medical OEM brings all the latest technologies to your project and can provide everything from precision extrusion of components to product assembly to packaging. You have the security of knowing that Teleflex Medical OEM has complete control over each step of the product development and manufacturing process and can quickly respond to any immediate need. 

Our team of highly-qualified engineers, material and polymer experts, and skilled technicians makes Teleflex Medical OEM stand above the rest. You can count on us to enhance your design, develop functional prototypes, guide you through the maze of global regulations, and scale up for manufacturing.

Our expertise extends to:
  • Introducers with rotator lock technology
  • Interlocking sheath/dilator assemblies
  • Coaxial sheath/dilator introducers
  • Over-the-needle, peelable introducers
  • PTFE micro-introducer split sheath/dilator
  • Standard dilators
  •  Introducer needles
Let's get to work on your project.

More Less

Product category: Extrusion, Catheters, Product design, product development, Surface coating, Other component manufacturing, Tubings and tubing equipment, Temperature sensors

Teleflex Medical OEM: Global Leader for Customized-Engineered Devices and Components

Work With the Experts™ at Teleflex Medical OEM

Teleflex Medical OEM is the partner that can hear what you are saying, understand your needs, and arrive at innovative, highly-customized solutions. Our team offers you everything from raw materials to components to finished devices. That is why we are the “go to people” for OEMs worldwide who want to partner with a proven leader in custom-engineered:

  • Extrusions
  • Diagnostic and interventional catheters
  • Balloons, balloon catheters, and balloon tubing
  • Sheath/dilator sets (introducers)
  • Specialized sutures and performance fibers
  • Bioabsorbable sutures, yarns, and resins
Partner with us for everything from product concept development to prototyping to manufacturing – all according to your exacting specifications. And you can do it with the confidence that your project is being handled by experienced professionals every step of the way. We are a well-qualified team of engineers, material and polymer experts, and skilled technicians that will seem like a natural extension of your own R&D department and operations staff.

Our extensive, in-house capabilities include:
  • Product concept development
  • Engineering
  • Design for manufacturability
  •  Material selection and formulation
  • Prototyping
  • Testing and validation
  • Production process development
  • Custom tooling
  • Manufacturing
  • Finishing operations
  • Assembly
  • Packaging
  • Private labeling
  • Sterilization
Let's get to work on your project.

More Less