Metisafe® has standardized products that can bring the ambient air quality to the highest level thanks to the modular cleanroom units designed as the device developed specifically for the application. Metisafe, which can offer practical and economical solutions in a wide spectrum with a device installation approach and advanced production technology instead of traditional construction and ventilation techniques, is also ahead of its competitors in the energy class. Metisafe Cleanroom Units with maximum product protection feature are suitable for working with materials that are not toxic or aerosol hazard. Depending on usage capacity, application and quality class, there are over 100 modular cleanroom models and more than 30 GMP /GLP compliant model among them. In addition to the cell culture laboratory, PCR laboratory, GMO analysis laboratory, stem cell unit, total parenteral nutrition (TPN) unit, neutropenic patient isolation room, operating room, intensive care units, there are production and maintenance applications of microelectronic, glass-optical devices in the industrial area.
Hard-Wall Metisafe® modular Cleanroom Units, which have the highest level of product protection, consist of cleanroom, entrance room and control unit sections. There is a Pass-Box used for material entry and exit between the outdoor/entrance room and the cleanroom. Both sections are positive air pressure and the cleaning class is ISO-7 (Class 10.000). Fresh air taken from outside the unit reaches the HEPA Fan Filter Units inside the rooms after pre-filters and air-conditioning. The air taken from the vents inside the unit is recirculated in the hygienic plenum. With the electronic control system, there is no air flow direction from outside to inside during door opening and a clean environment is constantly maintained. There are three different models of Metisafe® Hard-Wall systems with varying usage areas.