ACTO GmbH of Braunschweig at MEDICA 2021 in Düsseldorf -- COMPAMED Trade Fair
Manage stand orders
Select Option

ACTO GmbH

Büchnerstr. 11, 38118 Braunschweig
Germany
Telephone +49 531 2395080
Fax +49 531 23950811
info@actogmbh.com

Submit your contact details

Provide your contact details to the exhibitor. Optionally, you may also add a personal message.

Please log in

You must be logged in to send the contact request.

An error has occurred

Please check your internet connection or try again later.

Message has been sent

Your message to the exhibitor was sent successfully.

Hall map

MEDICA 2021 hall map (Hall 4): stand F05

Fairground map

MEDICA 2021 fairground map: Hall 4

Our range of products

Product categories

  • 05  Disposables and consumables
  • 05.15  Wound care equipment
  • 05.15.12  Other wound care equipment

Our products

Product category: Other wound care equipment

ACTOLIND® w SOLUTION


  • Polyhexanide is classified as the first choice for colonized and infected chronic wounds and first and second degree burns
  • Suitable for the care, cleansing, moisturising and decontamination of wounds and dressing materials such as bandages, dressings, compresses and dressings
  • Highly effective against multi-resistant organisms (MDRO, MRSA, VRE) and mycotic pathogens (Candida albicans)
  • Accelerates granulation and epithelialization
  • Dermatologically tested and rated very good
  • Biocompatible
  • Well tolerated
Properties
Actolind® w Solution is a cleansing, irrigation, moisturizing and maintenance solution used in conjunction with materials such as bandages, dressings, dressing pads and wound fillers on acute, chronic and infected wounds and first and second degree burns. It is also suitable for antiseptic cleansing, soaking and removal of dressing materials that have dried and are adherent to the wound without causing secondary trauma.

Actolind® w Solution cleans wounds mechanically. Due to its unique combination of ingredients, Actolind® w Solution provides a positive cleansing and moisturizing effect on tissue surfaces. Surface active agents in such a formulation provide convenient and painless cleansing needed prior to wound care by reducing surface tension. Actolind® w Solution contributes to wound healing by providing a very positive cleansing and moisturizing effect on the applied areas.

Actolind® w Solution simultaneously protects against multi-resistant (e.g. MRSA, VRE) and mycotic pathogens and is also well tolerated by allergy sufferers and diabetics.

This product is a class III medical device according to the Medical Device Directive 93/42/EEC as amended by 2007/47/EC.

Intended use
Cleaning and moistening
As long as no systemic diseases are present, wounds usually heal on their own provided they are kept clean and moist. However, contact with air, as well as contamination and desiccation of the wound, leads to the growth of various microorganisms. Actolind® Solution cleans and moistens the wound, creating a protective film layer that isolates the wound surface from the external environment. The space between the wound surface and the wound dressing is filled by Actolind® Solution and helps to accelerate wound healing by stabilizing the wound. In addition, Actolind® Solution prevents adhesion of the dressing material to the wound and the exclusion of air prevents the growth of microorganisms.

Irrigation
Wound coatings consist of cell and tissue debris, necrotic tissue, as well as wound exudates and other components that promote biofilm formation. Actolind W Solution is used to irrigate the wound to remove these very components that prevent the wound from healing.

Use at dressing change
Medical devices, such as bandages, gauzes, absorbent materials, compresses, etc., may adhere to the wound and cause secondary wounds after infection. Before changing the dressings and bandages, they should be soaked with Actolind® Solution. Due to the moisturizing and cleansing agents in the product composition, the bandage will be removed from the wound without causing tissue irritation or tissue damage.

More Less

Product category: Other wound care equipment

ACTOLIND® Plus Foam

Actolind® Plus Foam is a hydrophilic wound dressing made of polyurethane. Actolind® Plus Foam is suitable for the treatment of moderately to heavily exuding wounds.
Actolind® Plus Foam provides a moist wound mi- lieu compared to a typical dry condition, promoting wound healing and absorbing exsu- date from the wound site.
Actolind® Plus Foam provides a moderate FDDR (moisture vapor transmission rate) to allow the skin to breathe and protect the skin from bacterial invasion and contamination.

Indications for use:

  • Pressure ulcers,
  • Leg ulcers
  • diabetic ulcers,
  • traumatic wounds,
  • Lacerations,
  • Donor and graft sites,
  • First- and second-degree burns,
  • postoperative wounds,
  • open surgical wounds,
  • venous stasis ulcers,
  • acute wounds,
  • Stretch marks,
  • dermatological diseases.

More Less

Product category: Other wound care equipment

ACTOLIND® GEL PLUS

Actolind® Gel Plus is a protective moisturizing and conditioning gel used in conjunction with medical devices such as dressings, dressing pads, pads and wound fillers for acute or chronic wounds and first and second degree burns.
Due to its unique combination of ingredients, Actolind® Gel Plus forms a thin protective film layer on the applied area, which contributes to wound healing by preventing adhesion of microorganisms and keeping the wound surface clean and constantly moist. Actolind® Gel Plus fills the space between the dressing and the wound surface and minimizes dressing adhesion to the wound surface by preventing dehydration. Thus, Actolind® Gel Plus helps to shorten the period of the healing process by keeping the wound stable.
This product is a Class III medical device according to the Medical Device Directive 93/42/EEC as amended by 2007/47/EC.

Indications for use:

  • Infected or uninfected acute wounds (e.g., traumatic wounds resulting from cuts, lacerations, abrasions, contusions, bite wounds, puncture wounds, etc., or surgical wounds),
  • Infected or uninfected chronic wounds (e.g., diabetic ulcers, venous ulcers, pressure sores (bedsores), etc.),
  • Infected or uninfected thermal or chemical wounds (e.g., first- and second-degree burns, chemical burns, etc.),
  • Wounds caused by electric current,
  • Radiation wounds,
  • Entrance regions of urological catheters,
  • Care of peristomal skin, fistulas and abscesses,
  • Suitable for maintaining, moistening and covering the wound surface with a protective layer prior to the application of materials such as dressings, dressings, pads and wound fillers,
  • To form a barrier between the wound and dressing to prevent drying and sticking
Actolind® Gel Plus can be used in combination with Actolind® Solution Plus. Before applying Actolind® Gel Plus, the wound should be cleansed with Actolind® Solution Plus to remove impurities and debris.
Actolind® Gel Plus does not inhibit granulation or epithelialization. It shows no irritating nor pain-inducing properties, does not cause sensitization and can be used safely for a long time.
At the same time, Actolind® Gel Plus protects against multi-resistant (e.g. MRSA, VRE) and mycotic pathogens and is also well tolerated by allergy sufferers and diabetics. The protective film layer formed by Actolind® Gel Plus can be easily removed from the wound surface at the next dressing change. Actolind® Solution Plus is recommended for this purpose. This procedure should be repeated regularly to remove the dead tissue and crusts during the healing process. The ingredient polyhexanide has been clinically proven millions of times, is dermatologically safe and is considered the first choice wound treatment agent.

Application: Actolind® Gel Plus may be applied directly to wounds and to dressings and gauzes. Materials such as dressings, gauzes, wipes, etc. should not be reused. The opened product should only be used on a single patient to reduce the risk of contamination. Prior to the application of Actolind® Gel Plus, the wound should be cleansed with Actolind® Solution Plus to remove contaminants and debris. For optimal wound cleansing, it is recommended that the wound be moistened for at least 10-15 minutes using a fully wetted dressing (wet dressing application). The cleansed wound should be covered with Actolind® Gel Plus and properly dressed. Actolind® Gel Plus should not be used continuously on the same wound for more than 30 days. For healthy wound healing, wound cleansing and care should be performed at regular intervals. Actolind® Gel Plus should not be used in the following cases:It is not suitable for use on hyaline cartilage and after aseptic joint surgery, in the middle and inner ear and on the eye,
If the patient is known to be hypersensitive to any of the ingredients,
On the central nervous system or meninx,
Together with anionic surfactants, cleansing soaps, creams, oils, enzymes, etc.. These substances should be completely removed from the wound surface before use.
Indications Cleaning and moisturizing Actolind® Gel Plus cleans and moisturizes the wound surface. It remains on the wound surface and prevents an acute wound from becoming a chronic wound due to dehydration, contamination or contact with air. It helps to shorten the healing process by keeping the wound stable. Filling the wound Actolind® Gel Plus protects the wound from external influences by forming a thin protective layer on the wound surface. It fills the gap between the wound surface and the wound dressing, thus increasing the effectiveness of the dressing but also preventing adhesion of the dressing material to the wound. Actolind® is suitable for the following wound types: - Chronic wounds (diabetic ulcers, venous ulcers, pressure ulcers, etc.) - Thermal or chemical burns and injuries (1st and 2nd degree burns, chemical burns, etc.) - Wounds caused by electric current - Radiation wounds

More Less

About us

Company portrait

"ACTO GmbH" stands for quality, efficiency and innovation in the development and manufacture of products in the fields of disinfection, sterilization and hygiene. Highest quality standards, competitive pricing policy and the commitment of the whole team are the reasons why ACTO GmbH has been able to increase its sales figures in all sectors during the last years.

Since the company was founded in Braunschweig (DE) in 1990, further locations have been added in Bavaria and Baden-Württemberg, Wietzen-Holte (DE). TheACTO GmbH is divided into two main departments: Production and Export.

All production steps are supervised by a team of experts, and devices and equipment are always state-of-the-art. Basic analyses, such as efficacy or compatibility, are carried out exclusively by professional microbiologists and quality managers.

The products ofACTO GmbH are already available in numerous countries in Europe, Asia and Africa. Close networking and individually coordinated cooperation with existing and future distribution partners is particularly important, which is why the export and marketing departments work hand in hand.

In marketing,ACTO GmbH relies on continuous training of its employees with regard to the latest marketing strategies and methods, as well as on a well thought-out business development process, which makes it possible to win new distribution partners with targeted approaches and ideas.

Know-How & Experience
We understand ourselves not only in the development and production of biocide, cosmetic and medical products, but also in the development and production of wound treatment products.
We are very focused on the continuous improvement of our products, using only the latest ideas and techniques. So far we have succeeded in developing our products always on the newest state of the art, which are already used in many countries.