Ultrasonic imaging plays an important role in medical diagnostics. The demand for more precise diagnosis requires higher resolution, which can only be obtained using high-frequency ultrasonic
The 1410 Laser Welding Machine is used to connect fine plastic tubing. This machine is ideal for welding of balloon catheters. This connection technology allows short, soft and flexible
The Motion Laser Welding Machine is used to connect fine plastic tubing. This machine is ideal for welding of balloon catheters. This connection technology allows short, soft and flexible
The vertical 1555 Balloon Machine is designed for the production of a wide range of different high-quality plastic balloons and convinces with its small footprint for an optimal use of production
The 1620 is a calibrated relative pressure sensor for the clinically relevant pressure range of -50 to 300 mmHg. A biocompatible gel protects the pressure cell from the medium to be measured. For
This leak tester is used for the simultaneous final inspection of up to eight balloon catheters. The product is subjected to a specific pressure or vacuum and held for a defined time. The
ON-handle that visually confirms the position with a haptic “Click” in each Drug and Flushing position. Eliminates parallel flow of drugs connected to the Luer inlets Dedicated Flushing
The CTF - 807-LX2 is designed to form the distal and proximal ends of catheter tubes two at a time with individual power control and temperature feedback.
This lightweight cartridge valve is compact at just 15 mm and has a large flow rate of up to 210 l/min at 2 bar. The compact design and high flow rate of the proportional solenoid valve VPWS make it
The Hydrophilic Coating Machine is used for coating of catheter production assemblies. Up to 21 products are coated simultaneously by dipping and subsequent UV exposure in a controlled environment. A
The 2430 Balloon Forming Machine is designed to produce a variety of soft balloons. The electrically heated stretch, pump-blow molding process allows the production of different high-quality balloons
The automatic Tube Cutting Machine is designed for cutting plastic tubes with small wall thickness and is particularly suitable for high cutting volumes. The special cutting movement, combined with
The 2550 Balloon Forming Machine is designed for the production of a wide range of polymer balloons for angioplasty and other medical applications. The electrically heated stretch blow molding
The 2577 8UP Multiple Pressure Tester is designed for balloon catheter testing and offers the ability to apply a specific pressure to eight balloon catheters simultaneously. The machine has its own
The 2711 Automated Necking Machine utilizes the BW-TEC split-die concept to neck down polymer tubes. The tubes are automatically separated out of the tray and fed to the necking process. In
The Burst Tester is a Hydraulic Burst Tester designed for customers in the field of development and production of angioplasty catheters. The control system gives the opportunity to choose different
The 2920 Necking Machine is designed to neck down balloon tubes. The tube is pulled through a heated die and reduced to a defined diameter. The die is split into two parts to enable easy loading. The
Handle has a light at every stop every 45° turn. Easy for right setting without eye observation. Rotating adaptor enables quick connection and assure secured locking. Avoid kinking tube and allows
3-way stopcocks for standard hose diameters with single-arm chicks Dimensions: 3.8mm inner dia. 4.2mm outer dia Connectors: 2 female luer lock connectors and 1 male Material: PE, BPA-free
Use in energy-efficient applications. A 50ms switching signal changes the valve position. No additional energy is required to hold the position. The heat generated by a permanently energized solenoid
Page 1 of 100
To use the full function of this web site, JavaScript needs to be enabled in your browser.
This is how you enable JavaScript in your browser settings: Read instruction